Having problems with your Kodak EasyShare C743 Digital Camera ?
Mode dial and shutter button
\015 How does the mode dial and shutter come off? I need to replace them. I have another parts camera.\015
There are six screws (#0 phillips) on the sides and the bottom that you\015\012have to remove, two per side. Open the battery compartment and remove batteries\015\012and leave door open. the front should slip off, you might have to use a\015\012small flat screw driver to help the sides seperate. now there are three\015\012screws that hold the function button together. with the button out you\015\012can remove the old shutter button by GENTLY pushing the two little blue\015\012tabs to toward the center and into their little holes. be careful that\015\012the button doesn't shoot out and watch out for the spring. reassemble\015\012in the reverse order.
Repair Help & Product Troubleshooting for Kodak EasyShare C743 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Suddenly I can't control the aperture with the sub command dial in the manual mode. I have tried a "hard reset" and the two button reset to factory defaults. In M,A and S modes the shutter and aperture values will disappear and only return after a two button reset.I can adjust the aperture in A mode with the command dial.The shutter speed is adjustable in M mode with the command dial.
In Manual mode only the front dial can be used to set the aperture. That is probably In Aperture mode you can only choose the the Aperture. Shutter speed is automatically chosen. That is why the shutter speed value will disappear.In Shutt ... Nikon D80 Body Only Digital Camera
Mode dial and shutter button
There are six screws (#0 phillips) on the sides and the bottom that you\015\012have to remove, two per side. Open the battery compartment and remove batteries\015\012and leave door open. the front should slip off, you might have to use a\015\012small ... Kodak EasyShare C743 Digital Camera
Hi, My D80 has suddenly developed a fault, where it registers the flash as open and in use even when its shut. This has the effect of syncing the shutter speed and limiting it to 1 200th in all modes. In addition, whilst the flash button will still change the flash mode using the command dials, it won't open the flash- almost like the camera thinks the flash is already open. I have tried prising open the flash, and it still doesn't fire even when open. There was no indication of a problem previ
Hi dave_lankest. My suggestion is to do a factory reset on the camera. This is found on page 129 of the manual. Open the rubber flap on the left side of the camera then you will see below the USB port a small button, that is the reset switch. If that ... Nikon D80 Digital Camera with 18-135mm Lens
I have a Nikon D40, and when I set the mode dial to Close up the shutter button won't always depress.
It's because you are to close to the subject. You can back off or set your lens to manual and the shutter will release whether or not it is in focus. ... Nikon Digital Cameras
Shutter Problem I have an Olympus C-750 that I was in love with until 5 days before my vacation when the shutter button decided to stop working. Zoom in and out still works, but the shutter will not respond to the button or the remote. The other strange symptom is when I turn the camera on, it snaps a picture (and then won't take anymore). Thought I might have managed to put it in a certain mode or hit some magic series of buttons to put it in this strange mode, but I can't undo it. Tried changi
I had an Olympus C-3000 this same type of sympton happened to me. I sent it off to Olympus to be fixed (via local camera dealer). When it came back, after about 10 shots, it failed again the same way. Back to Olympus a second time. Came back and fail ... Olympus Camedia C-750 Ultra Zoom Digital Camera
Cannon EOS500D, taking a picture in creative modes I have to press the shutter button twice to take a picture.(not counting the half pressing of the shutter button. the second pressing of the shutter button can be any length of time to take a picture. It seems to think there is delay set but there is not. In basic modes the picture is taken normally
Hi kevinmullen8 - was this ever resolved? My mum was mucking around with my camera (eos1000d) and I have the exact same problem (press shutter twice in creative mode). Factory reset was of no assistance.Please help!!! ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac
I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras
Nikon Coolpix L14 digital camera was dropped recently. Since then, when flash mode is set to AUTO, shutter-release button must be pressed several times to take a picture. If flash mode is OFF, shutter-release button takes a picture the first time pressed.
There is some misalignment within the camera that occurred while it fell. The possibility can be the trigger to the flash which was set off , there can be a crack on the electronic board, a possible switch issue of the flash trigger or a ... Digital Cameras
All of a sudden, my Canon Rebel SLR stopped focusing and I cannot depress the shutter button when on AF mode. I can press the shutter button on MF mode, but there is no focusing happening. Do you think it needs to be repaired? I've looked through the manual but cannot find any way to resolve the problem. The camera is only 3 months old.
Try this...remove the lens and fire off a few shots. Clean the contacts on the lens and camera body where they meet with a cotton swab lightly dampened with rubbing alcohol. Re-attach the lens and try it. ... Canon Digital Rebel XSi Digital Camera
Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual
In full manual, yes it should. ... Digital Cameras
Shutter speed on the auto mode of my s1000 camera seems slow. how can it be increased in the auto mode? This is a Fuji camera and by the time I press the shutter button subjects have moved. I have set the camera back to the original factory settings and I can adjust the shutter speed in the manual position but in auto it seems really slow.
You need to press the shutter button half-way and allow the camera to lock in the focus before you press the rest of the way. This eliminates "shutter lag". ... Fuji FinePix S1000FD Digital Camera
On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.
I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera
The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.
Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras
MY FUJIFILM AV1OO DIGITAL CAMERA IS NOT WORKING PROPERLY AS SOON AS BATTERY IS INSERTED IT GETTING POWER ON AND TAKING TO PLAY MODE. FOR SHOOTING MODE IF I PRESS SHUTTER IT BLINKING RED LED AND SHOWING "PRESS SHUTTER BUTTON FOR SHOOTING MODE" NOTHING HAPPENING
... FUJIFILM FinePix AV100 Digital Camera
Command dial on a friend's Fuji Finepix S9000 is NOT functioning. Can't control aperture, shutter speed, flash settings, etc. Can it be opened and fixed (he has no warranty, thus no problem with opening it). Is there a special setting or way of turning or pressing buttons that he is doing wrong? It says to press (and hold?) a button then twist the dial, but no change is made as far as I can see. I have tried enless things and have much experience (though I'd be a fool not to ask others). A
Hi. I just bought this exact model on ebay and it arrived with the same problem. I found many others with the same problem on various sites, but happened upon this extremely thoughtful man's album showing the steps to fix it. Thought I'd share with y ... Fuji FinePix S9000 Zoom Digital Camera
New Nikon d3000 won't release shutter while in autofocus mode. Have DX 18-55 VR lens that came with camera. Shutter releases only when I push the exposure/focus lock button. Manual focus mode works fine.
... Nikon D3000 Digital Camera
Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t
My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera
I have a Canon EOS 450D camera, when used in the Auto mode ..all is well when I try to use it in P,Tv,M or A-Dep mode the shutter does not complete its function but stays open until I press the shutter button again. Any clues? kp
I reset the software to Default setting and started again...that seems to have done the trick.Thanks for your interest.kp ... Canon Digital Cameras
I have an EOS Rebel XTi. The Mode dial does not show all zones, ie: It shows Program and Shutter-priority and automatic depth-of-field but does not show Aperture-priority or Manual modes on the setting display when selected on the dial.
Rebel does not have 1.0.4this can be a possible non canon firmware or a beta versionflashing your 1.1.1 may help out with this issue. ... Canon Digital Cameras
When I attempt to use the camera in Auto Focus mode many times I depress the button and nothing happens. The camera is on and I depress the button half way no beeps to focus and when depressed fully nothing happens. I then turn the camera off and twist the camera mode dial and and turn the camera back on and it works again not always but many times.
Are you using the 50mm lens with aperture ring, if so move to th largest F no and try again. ... Nikon D90 Digital Camera with 18-105mm lens
My Kodak Z712 is changing modes by itself from one mode to another randomly, without turning mode dial button, and can not take picture until camera stop's changing mode by itself.
I would try spinning the selector knob back and forth a few times to see if it cleans up the contacts otherwise i think you will be sending it in for service. I love my 712is. But check on repair costs,, might get the 812 or 1015 cheaper and they use ... Kodak EasyShare Z712 Digital Camera
D7000 main command dial doesn't seem to be working. Many functions say to press a button nd then use main command dial for the options, but it doesn't scroll through any when I turn the dial. For example, for auto focus modes. Any ideas?!
... Nikon D7000 Digital Camera
My camera is brand new, got it just last week. I tried using the S mode on the mode dial and tried shooting with the fastest shutter speed, but all pictures turned out to be blank/black. The same happened for the P, A and M mode. May I know if it's a problem with my settings or the camera?
Photographing is matching the shutter speed and aperture to the ambient lighting conditions to create the effect you want. 'Auto'- and 'P'-mode should match those automatically. 'S' will choose the aperture and 'A' the shutter speed according to the ... Nikon D5000 Digital Camera
Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do
The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera
Lately my E520 camera is only working on "auto" mode. When I switch the camera to any other mode the shutter button does not release. As a result I am only able to shoot in auto mode. Please advise.
U HAVE A HARD PART FAILURE, YOU NEED TO REPLACE THE LOGIC CIRCUIT BOARD FOR THE CONTROL SWITCH, THE MANUFACTURER DOESN'T SELL PARTS OR TECH SERVICE BOOKS TO THE PUBLIC, THE RESULT IS YOU ARE FORCED TO HAVE THIS REPAIRED BY A FACTORY APPROVED REPA ... Digital Cameras