Having problems with your Kodak EasyShare C743 Digital Camera ?
Installed new battey but camera does not turn on
Check the brand of battery to be sure it is compatable with the kodak. I found some batteries have a short positive electrode that will not contact the metal plate on cameras battery door. Cheap batteries will not even turn these cameras on.
Repair Help & Product Troubleshooting for Kodak EasyShare C743 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Installed new battey but camera does not turn on
Check the brand of battery to be sure it is compatable with the kodak. I found some batteries have a short positive electrode that will not contact the metal plate on cameras battery door. Cheap batteries will not even turn these cameras on. ... Kodak EasyShare C743 Digital Camera
Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the
Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera
Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t
HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera
Charge battery install battery, turn camera on after 10 seconds camera turns off and yellow light blinks. installed new battery same results ????
I suggest remove the batteries and wipe the camera contacts firmly with\015\012a dry cloth (heavy corrosion may require cleaning with a wire brush,\015\012steel wool, or sandpaper). Remove any residue that may have fallen\015\012into the batt ... Digital Cameras
I have a samsung digimax A402 camera. I have never had a problem with it powering on until now. I have placed brand new double A batteries and when I press the power button on the camera the screen tells me my battery is low and the camera powers off. I have tried different brands of batteries as well. What is the reason my camera will no longer turn on and stay on with new batteries installed?
My camera did exactly the same thing. I found that there was a minute trace of corrosion on one of the battery conections inside the body of the camera. After cleaning up the contacts to remove the corrosion the camera powered up without fault. It di ... Samsung Digimax A402 Digital Camera
Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
Installing camera hi..i have a question. i dont know if yall are who im supposed to ask, but im going to give it a shot. okay, so i have a i634 polaroid digital camera. well, it has worked fine for the last month..now all of a sudden, when i try to bring it up on the computer to get my pictures, its saying that it isnt hooked up right or its not turned on...it is turned on and is hooked up right. usually as soon as i turn my camea on, it will automatically say *new hardware found*, but its not d
My batteries are fully charged,but my camera is makeing a beeping noise like thier not charged and it always used to tell me to replace the batteries and now it dosent ,it just wont turn on.what do i do? ... Digital Cameras
I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f
Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera
I'm a new user of the D90 (and digital in general), and on my first major trip with it I had problem with the shutter not working. I would take some images, put the camera down without turning it off and move on to the next spot. At the second stop the camera would not work. I'd turn it off, remove the battery, run the lens in and out and eventually it would work again. The message I got was F--, which said that the lens was not installed properly. However the lens was never removed. What's
George,Since you didn't say if this was a "new camera & lens" or if it was a "new to you" camera and lens, or which *exact* lens you have, there are a couple of ways this can work.Nikon lists the following remedy for error ... Nikon D90 Digital Camera with 18-105mm lens
CF Card I took my cf card out of my camera to be sure I got the right card when purchasing another card. My first card was 1.0 GB and I purchased another, 2.0 GB. I tried inserting the new card tonight and could not get it to go in. I then discovered that I had the card turned the wrong way when installing. I finally realized the way it should go in and got the card installed. Once in the camera, I began getting an error message saying "Err CF - There is a problem with the CF card. - Replace the
You can actually buy a replacement card reader at darntoothysam.com for $21.95. ... Canon EOS-20D Digital Camera with 17-85mm Lens
The camera when turned on turns off after 5 seconds. Trying to recharge the battery does not work and installing a new battery does the same thing as the old one. I tried to reset the camera and no change. Any ideas? Is it fried?
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... HP Photosmart R727 Digital Camera
Camera wont turn on. I have new battery, installed correctly, but it won't turn on. I have had this camera for a while now
Make sure your battery is new or you have a good recharged battery. If the camera will not turn on, you then have no choice except to have it sent for repairs. The camera may not be worth the difference to repair compared to a new one. You can ... Canon PowerShot A460 Digital Camera
I have a FinePix Z1 I have installed a new battery and it is fully charged. The problem is that the camera shuts down within 20 seconds. I slide the front and it restarts only to shut down again. I have reset the camera via the menu and every time I try to go to the menu the camera shuts down. I have just taken 22 pictures went to the menu to turn off the lcd saver and the camera shut ndown Please help
I had very similar problem. There is a small sensor flap near the hinge in the battery compartment which tells the camera if the battery door is closed or not. If it wont work properly it gives signal "battery door open" and camera will shut down, mi ... Fuji FinePix Z1 Digital Camera
E18? Hi, folks! I have an old Canon PowerShop s100 that displays the message "E18" when I try to turn it on. Thoughts? I'm going abroad tomorrow and really need a working camera!! Less pressingly, I no longer have the software that came with the camera, and I have a new Dell with Vista. I've been trying to download photos off my camera, but when I attach the camera to the computer, I'm asked to install driver software that I don't have. Can you suggest a site to download Vista-compatible dri
E18 means that the lense is not coming out all the way it is a internal error it is going to have to be taken apart and the internal workings cleaned. for drivers sorry have know idea. ... Canon PowerShot S100 Digital Camera
We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(
Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera
Camera's about 2 years old. With a fully charged battery it will take about 8 to 10 photos and then the battery indicates total discharge. How ever, if the camera is turned off for several minutes and then back on it will again take several pictures and but then again shows that the battery is totally discharged. I have tried installing a new "out of the box" battery in the camera but I still get the same sequence of events. Any help you can provide will be greatly appreciated
This is going to be a tough one, but we may get lucky. There are a few things that can cause this situation, and it can get tricky since we never know how long replacement batteries have been on the shelf. When some rechargeable batteries totall ... Olympus FE-340 Digital Camera
My Cannon Power Shot A520 Camera will not power the lens up when I turn it on. I get the message "No Image" on the viewing screen, but nothing else happens. Back Switch is set on camera symbol, but camera acts like it is set on view. I have installed new batteries and battery terminals are clean.
The camera may need a software update which can be done through manufacture for $50 or you can downlaod an update from their website and follow the directionsOr the zoom may be dirty or debris is stuck in the zoom lens and needs to be blow out ... Digital Cameras
My Samsung S630 digital camera has or should I say had, recent irreplaceable photographic and video images on it. I viewed the images 2 days ago and they were all there and all ok. I turned the camera on this morning and the message "No Image" has come up. I don't understand how in les than 2 days, the images have mysteriously vanished? The camera has not been in use all weekend. It had brand new batteries installed within the last fortnight. Do you know what has happened and is this a common pr
Do NOT for any reason use the camera again to take pictures. If it has an internal memory, take it out and, if you need to use the camera, replace it with another compatible one.Now if you can either mount the camera as USB disk, or you c ... Samsung Digimax S630 Digital Camera
Olympus D-435 digital camera, when you turn it on, error msg says "battery empty" then times out and shuts off. New Batteries have been installed, did not correct the problem. How can I make this camera come on and work? Thanks..
If ur using a memory card try to use a memory card even though it relates the battery it may be a memory card problem....First take out the memory card and then try to use the camera and if it works fine that says that there is a problem with m ... Digital Cameras
Have a nikon D80, sometimes when turning on and taking a photo the battery drains to no charge. have to turn off and back on again and camera works ok. have tried on existing battery and on a brand new battery, same problem, so its not the battey.
HI,You can try updating the firmware if it is possible first.If this doesn't help then try removing the batteries off the camera\015\012and allow the camera to reset for an hour and then put them back.If this doesn't help then You n ... Digital Cameras
The LCD screen does not display when the camera is turned on. I have installed new batteries. The screen works to see pics in the memory but does not work when taking a new pic. Also when using the view finder to take a pic the results is just a black pic, the image is not shown on the pic.
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A60 Digital Camera
Installed new batteries and the camera will not turn on. The camera has been sitting up for 6 mo. with no use. We used energizer lithium batteries.
Try using recomended batteries:\015\012optional KODAK EASYSHARE Docks with 1 KODAK Ni-MH Rechargeable Digital Camera Battery KAA2HR; 2 Ni-MH batteries AA, 2 lithium batteries AA; 1 KODAK Lithium Digital Camera Battery CRV3; KODAK Ni-MH 2100mAh ... Kodak EasyShare C653 Digital Camera
Kodak EasyShare M1093 IS digital camera. When I turn it on, the lens extends for about three seconds, then retreats and the camera shuts off. I have installed brand new battery and checked memory card to no avail.
Remove the memory card and see if it will come on. Are you 100% sure the battery is fully charged and is the correct battery? if so, then go here.\015\012 ... Digital Cameras
I recently bought a SanDisk 4GB SDHC card for my DXG-572V. I put it in the camera, and I turned the power on. A screen comes up saying "Format Card?". I have tried selecting both "Yes" and "No", but each time I select either one, the camera powers off automatically. I just installed brand new batteries, also. How can I get past this screen?
Your problem is that you are trying to use an incompatible memory card. The DXG-572V is not SDHC compliant and will only work with regular SD cards. In theory it's compatible up to 4GB but in practice there are few standard SD devices whi ... DXG Technology DXG-572V Digital Camera
My kodak easyshare 913 digital camera will not turn on after installing new batteries. the camera is only a few weeks old and has only been used a few times. i really don't think the batteries are the issue.
Remove the batteries and clean the battery contacts inside the camera\015\012with a soft cloth (a heavy buildup on the contacts may require cleaning\015\012with a fine wire brush, steel wool, or sandpaper). Remove any residue\015\012that the cleanin ... Kodak EasyShare C913 Digital Camera