Having problems with your Kodak EasyShare C875 Digital Camera ?
Histogram (LCD Info/Help button)
\015 Second problem....Noticed my histogram doesn't appear anymore while pressing LCD Info Help button. \015\012\015\012Could this be why I have NO flash?\015
Surely it's because you've changed shooting modes?
Repair Help & Product Troubleshooting for Kodak EasyShare C875 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Histogram (LCD Info/Help button)
Surely it's because you've changed shooting modes? ... Kodak EasyShare C875 Digital Camera
Camera shows no image through the viewfinder or on the lcd screen.pressing shutter button will actuate the camera, but only image is of a black box.using the display button to turn off the lcd does not help. the information icons show both in the viewfinder and on the lcd. camera has not been subjected to any abuse of any kind. has not been used for about 2 months
A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot S3 IS Digital Camera
Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.
Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera
DSC-W200 Frozen My W200 has the lens open (extended) and will not close. Additionally, when I press the power button or the play button on the back, the LCD lights up and says Sony, but nothing else happens. I've tried connecting it to my macbook, using a fully charged battery, memory card vs no card, etc. Nothing seems to work. If I press the power button a seond time, the green power light goes off, but the LCD still says Sony. Any help would be greatly appreciated. Not too eager to send it
Try this it works for lens problems like you describe ]]] OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local gara ... Sony Cyber-shot DSC-W200 Digital Camera
Histogram Hi! This is probably a simple problem with a simple solution, but I can't solve it! How do I get rid of the histogram display which automatically displays when I review a photo.I can get rid of it by pressing the "ENTER" button, but then I can't continue to review the other photos I've taken. I didn't have the histogram display until recently, so I must've pressed the wrong button somewhere! Help! Please.... thanks, Crisse
Use the multi selector button ( the round button with the 4 arrows) and used the up and down arrows to cycle throug various modes. Refer to the attached picture.\015\012\015\012-Vish ... Nikon D50 Digital Camera
When i open my camera (olympus sp800uz) it only display blank screen on the LCD but when i try to click the shutter button it works and also the zoom button. what is the problem of my LCD do i need to send it to the servicer center to be repaired?
Yes, your camera needs servicing. ... Olympus SP800UZ Digital Camera
I reset my DSC-2T00 by removing battery and pressing power button for 1 min. My LCD screen still does not show anything; however, when I click the button to take picture camera does flashes. But the LCD screen does not show anything again. Any help would appreciate???
No back lite ... Sony Cybershot DSC-T200 Digital Camera
Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes
I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera
D40X LCD Hi Dear Because of the removal of the control panel LCD the D40X uses the main LCD monitor for camera information display and the change of settings. By default this display is not shown, instead you press the 'info' button to show or hide it, you can optionally have the display on all the time. My question is: What i have to do for have the LCD always on. Thank you Quim
Return the control panel in order back to normal. ... Nikon D40x Digital Camera
I have a flip Ultra HD 2nd gen model: u2120B. I bought it off of eBay, broken. The buttons don't work. The camera is seen by the computer when plugged in. I can format the camera HD and reinstall the software. No change. When I turn the camera on, it goes directly into setup, prompting me to select a language (English). I push all of the buttons and nothing happens. The only button that does anything is the power button. I have taken other flip cameras apart and replaced the LCD, lens, res
... Digital Cameras
Menu Problem I can take photo's fine, and i get my normal preview on the LCD but when i push the menu button or try play back my images - nothing happens. In fact every button except the wheel/power on off and the "take photo" button is not working??? Nothing i press will work except to take pictures? help! It is brand new, got it two weeks ago and everything was working fine. And nothing happened to it, and i changed nothing.
Did you try calling Canon tech support or returning to retailer if the camera is really not functioning properly this soon after purchase, I'd try returning it once all troubleshooting issues have not resolved the issue.\015\012\015\012Ho ... Canon EOS 400D / Rebel XTi Digital Camera
LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help
As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera
Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?
Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera
I own a Sony Cybershot DSCW350 and when I put my sony memory card in, the camera on/off button, settings buttons, and shutter button stop working completely and the lcd portion is the only part that stays on. The memory card will not read in either my card reader for the computer or my camera (earlier it gave a reinsert memory card error, but after cleaning it with a pencil eraser and soft cloth as Sony tech assistance suggested, fter cleaning it the error message stopped coming up completely it
You might try to re clean the card with a smooth cloth that is used for cleaning DVD`s also clean the slot on your camera... sounds like you might have got something on the card or in the camera slot.. you can also trying cleaning them with a little ... Sony Cybershot DSCW350 Digital Camera
Canon SD900 selection options not responsive. The selector wheel, Function Set button and menu selector only work from time to time. Even if pressing the ring brings up info to the LCD, nothing can be changed because the Function Button and the Menu button are not active. This is a random problem. Sometime, I can bring all functions back to life by removing and re-inserting the battery and restarting.
Sounds like the board has become damp and possibly corroded in certain parts this causing the random effect with the buttons their isnt much you can do unless you can remove the case yourself and give it a good clean but doing this is extremely diffi ... Digital Cameras
Sony DCR-HC32E LCD screen on handycam is blank when open. Close it and appears OK through viewfinder. Selection buttons on LCD panel had stopped working. Touch screen okay one day then not the next. Could it be a switch mechanism problem between LCD panel and main body?
... Digital Cameras
Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.
Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera
Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t
My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera
Casio ex-m2 My camera turns on, but will not record with or without the sd memory card installed. the flash will not even come on. the lcd turns on, and the exilim start up screen appears, and then the scene where the camera is pointed to shows up on the lcd screen. when i depress the shoot button, nothing happens.
Does the Camera have internal memory?\015\012I think you need the card it to get any where\015\012Check out the manual ... Casio Exilim EX-M2 Digital Camera
The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem
Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera
Hey there my camera lcd screen doesnt turn on when i turn on my camera, it stays black and i have tried some of the suggestions i saw on ur site like holding the menu button for more than 5 seconds and resetting it.it worked bt once i turned it off and on agin it did the same thing, i repeated the above suggestion, it worked again bt the moment i turned it on n off again it just stayed black, and now the menu button isnt responding at all wht do i do its an olympus FE-320
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Olympus FE-320 Digital Camera
My Kodak Easy Share C613 purchaed 13 months ago seems broken, It appears like water damage of some sort. Buttons stick, LCD display turns on intermittantly, pictures don't take, and can't view older pictures. Sometimes when the LCD display does work it looks like water drops in the backgroung. How much does it cost to estimate repair and who do I send it to? Jo Lynne
Try this :\015\012This works on most mini electronic devices like cellular phones and degital cameras etc . \015\012\015\012it sounds crazy .Remove the back (or Cover ) of the phone( or Camera ), battery, and SIM i ... Kodak EasyShare C613 Digital Camera
My eos400d is taking photos but the lcd screen is not turning on at all. I cannot preview photos or access the menu. When it first did it the cf card started flashing wen I tried to take a photo. After taking some more photos I got a full cf card message. I deleted photos using my computer as I cant see anything on the screen but the lcd screen still wont come on. I have pressed the disp button also but nothing happens.
Your LCD display card has failed. \015\012This is usually due to mishandling - dropping, bumping, drastic temp change, high humidity etc.\015\012There is no end-user or easy "push this button" fix.\015\012Please contact your local C ... Digital Cameras
Lcd the lcd of my canon poweshot s100 digital isnt working, i dont know what happen, all of a sudden when i push the camera button , no image can be seen
Did you accidentally hit the "DISPLAY" or "DISP" button on the back? ... Canon PowerShot S100 Digital Camera
Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho
I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera