Having problems with your Kodak EasyShare C913 Digital Camera ?
My camera will not read a memory card
\015 When I insert a new camera card, I get the message that the memory card is full and needs reformatted, but when I try to do that it will not format the card. I have tried 3 new camera cards to ensure the card(s) were not corrupt. \302\240There are no pictures on the internal memory, and the camera card is not too large for the camera (1G). \302\240Once in awhile, it will begin to read the card, and it stores the photos. \302\240But the camera is unreliable. \302\240It was purchased 5 months ago, and only used a few times.\015
Send the camera back to Kodak. Go to Kodak website for warranty info and address location of warranty centers in your area.
Repair Help & Product Troubleshooting for Kodak EasyShare C913 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a 256MB SD memory card (SanDisk). The case has split and my camera and my computer cannot read the card. Is there anything I can do? My Samsung L201 Camera and other cameras cannot read the my SanDisk Memory Card (256 MB). It all started when the memory card went full and I changed it and used a 2 GB SanDisk instead. When I put it in my camera again, the card cannot be read. It asked if I wanted to format it but my files would be deleted. I put it in my laptop and the laptop cannot rea
Try to check your memory card with at least 5 different computers. if they have card readers much better. memory cards have to be given at least 8MB for processing. It may have been used up even the space for processing. If haven't save the files ... Samsung L200 Digital Camera
We insert a memory chip into our Kodak EasyShare C190 camera. The read-out informs us that the memory card requires formatting. We click on "OK." The camera goes into a "formatting" mode, then informs us that the memory card cannot be read. It goes back to the "Memory card requires formatting" prompt, we click on "OK," it goes back into the "formatting" mode, then tells us again that the memory card cannot be read. We can't do anything else with the camera until we take the chip out, then we hav
Your camera is only supporting SD/MMC Cards (up to 2 GB) and KODAK SDHC Cards (up to 8 GB). \015\012The card that you currently have might be faulty. Please try another card.You might also need to switch the camera over to saving pictures ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD
Pentax A10 Have a three month Pentax A10 digial camera, with no previous problems. It now cannot read the SD memory card and won't take pics when the memory card is in the camera. This memory card will work in other cameras. Able to take a photo when the memory card is out of camera. Tried a different memory card - same problem. This happened after I took the card in to Walgreens to get some prints made. Can taking the card out of the camera and putting it back in damage the part of the camera t
Try another card in your camera but check the inside the card holder that you have not got a damaged connector in there. and format the card with the camera and not on pc. Hope that help you.jam ... Pentax Optio A10 Digital Camera
I uploaded my pictures from my memory card onto the computer. When I put the card back into my camera, the camera won't read the memory card and it says the internal memory is full (12 pictures). How do I get the camera to read the memory card?
If you indeed have the pictures on your computer (and are safely stored)... you might try selecting the format memory card function in the camera, to reformat the card, in case it was somehow corrupted while connected to the computer. ... Kodak EasyShare M853 Digital Camera
When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!
Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras
Vivitar 5399 not reading memory card. Originally had a 4GB card and that worked fine, then all of a sudden the camera wouldn't read the memory card. Card is fine in other cameras. Just switched to a 128MB card and still the camera does not see anything. Help!
HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Vivitar Vivacam 5399 Digital Camera
Hi.....i am havimng a problem with my memory card PNY Optima SDHC 8 gb class 4......i have been using it in my sony camera....its was working fine at the start but recently after when i inserted the memory card in my camera it say "system error" or "error formating memory card".....i tried other memory cards in my camera and it worked..so i thought to formating my card using my camera usb cable but when i inserted the cable to my pc it says your disk is in read only format and make sure its ch
You will most likely find that your camera will work with cards up to a certain capacity e.g. 2gband not with cards of higher capacity. What this means in effect is that high capacity cards are not compatible with your camera. It would be inter ... Digital Cameras
My Lumix DMC FZ30 use to work using a 4gb SDHC SanDisk card, but now says, "Memory card error please check the card". However, the card works fine in any other cameras. A small pocket Fujifilm camera for example. I was told to reformat the card in the camera, but I'm unable to use any part of the FZ30 camera while the card is inserted and on. Please help as I want to use my 4gb card and not just the 2gb ones which work fine so I know it's not a problem with the camera reading memory cards, just
Memory cards have a limited life. If you've been using it a lot and erasing it or formatting it, it probably is just worn out. Take it to a camera shop and try a new card. If that works, go to a discount store and buy a new one. It will cost less ... Panasonic Lumix DMC-FZ30 Digital Camera
I am having trouble with computer not being able to read my memory card. Got a new memory card and I took pictures with it and they showed up on the camera put memory card in computer and said there were no pictures and now the camera won't read it either.
Have a look at the pins at the back of the memory card reader. You may need a torch to see to the back. My kids stuck something in my computer card slot and bent the pins so my cards would not read. ... Canon Digital Rebel XTi Digital Camera
My digital camera does not read my memory card anymore. When I turn on the camera it shows only the internal memory even though I have a 2g sd card installed, used to work fine, I tried other cards and they don't work either but read just fine on my computer or other camera, help!!!
... Nikon COOLPIX S230 Digital Camera
Camera won't read memory cards I have tried several different memory cards, the camera display reads "no memory card"
There are several possible causes for memory card errors. Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format came out. Others include problems with the switch on the side of the card, and the switch internal ... Canon PowerShot A560 Digital Camera
I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"
Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras
I want to replace the memory chip in my Canon PowerShot SD1100 IS camera with a larger one but leave the photos taken on the original memory card on the camera. I used my computer to first read the photos off the original chip, then to write them back to the larger chip. When I put the larger chip in the camera, it shows no images. When I read the chip with a card reader, I do see the images. I want to be able to see those images on the camera (so I can use it as a viewer to share my photos
Hello.First of all make sure you have a copy of all your pictures in your computer. Then format the new card USING YOUR DIGITAL CAMERA. After that, transfer the pictures to your SD card from your computer and make sure that you did ... Digital Cameras
Will not read memory cards comes up with memory card error card locked. When i put memory card into computer or another camera the card is read without any bother , so memory cards are ok.
Is there a slide switch on the side of the card? It should be in the unlocked position. ... Canon PowerShot S2 IS Digital Camera
When I install a memory card in my camera I get the message read only memory card, remove write protection to capture or write to card. The switch on the memory card is in the correct position, this is a card that I have been using with no problems until now. I also installed a brand new memory card and got the same message. I think there's a problem internally with the camera.
... Kodak EasyShare Z740 Digital Camera
I bought this camera off of an realestate agent, she said it wasnt very old and that it worked great, it didnt have a memory card in it she said i would haft to get one. I have gotten 3 differnt ones and they all say it cant be read. I talked to a walmart associate and she thought I needed a 1 gb memory card for that camera so I got one off line and it still does the same thing. I put the same memory card in another camera and it works just fine. I have this nice camera and I cant even use it
Your camera is only supporting: SD/MMC up to 1 Gigabyte\015\012The card that you currently have might be high speed HHC. All should be sorted if you change the SD card to the supported MMC SD card. ... Kodak EASYSHARE CW330 Digital Camera
I have a Sony DSC-H7. After removing the memory card to process some photos at a local walgreens, I went to re insert it, and after I did the camera doesn't seem to read the memory card(SanDisk ProDuo 2.0 Gb). I went to the Internal Memory tool on the camera and it only shows an option to format the cameras built in memory space. I have heard these cards can just go out but I want to make sure there is no option of reformat. Thank you!
... Sony Cyber-shot DSC-H7 Digital Camera
Hey. I bought a new camera some days ago with a new Digix 4gb SDHC memory card. I went to Disney World and took normally a lot of pictures. From one moment to another, the camera gives me the message "Memory card error" and won't let me take nor view pictures. I tried removing the memory card and everything. I checked and It isn't locked or something. Also, I tried using a memory card reader on my laptop, and it says I have to format to read the card. I REALLY don't want to lose the pictures.
Take the card to a Walmart and insert it into one of their picture kiosk machines. You can print the pictures or even make a CD of them. ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera
Hey. I bought a new camera some days ago with a new Digix 4gb SDHC memory card. I went to Disney World and took normally a lot of pictures. From one moment to another, the camera gives me the message "Memory card error" and won't let me take nor view pictures. I tried removing the memory card and everything. I checked and It isn't locked or something. Also, I tried using a memory card reader on my laptop, and it says I have to format to read the card. I REALLY don't want to lose the pic
The first thing that may be complicating things is, can your laptop read SDHC cards, or just SD cards? If the laptop is asking you to format it, then probably it's working, but be really sure, before you continue.Check the co ... Digital Cameras
When I inset my memory card into my camera it reads memory card requires formatting. What does this mean? New memory card causes prompt to format card but camera does not complete formatting successfully. Kodak EasyShare Z612. SanDisk HC 8GB memory card.
\015\012\015\012Insert your memory card into your computer's reader if you have one. If \015\012not, you can purchase a multi-format USB Memory Card reader from \015\012Amazon.com or Buy.com\015\012\015\01 ... Kodak EasyShare Z612 Digital Camera
When I put a memory card in my camera its says it needs formating, so I push continue to format and it comes up with the message read only memory card remove write protection to capture or write to card. The switch on the memory card is in the right position. I think something is wrong with the camera, I installed a brand new memory card and got the same message.
Is this a different manufacturer than your\015\012other cards? Is it formatted correctly (e.g., FAT16 instead of FAT32)?\015\012Otherwise, not all cards are compatible with all cameras. There are\015\012subtle differences in the IDE drive ... Kodak EasyShare Z740 Digital Camera
I appear to have lost all my holiday photos due to a crash within the camera when the memory was reading full. Although the camera is not recognising any images on the card It still has a message saying memory full. I have tried to copy the images within the camera memory onto the apparently empty memory card but again the message comes up no images to copy. I know the data is there because the camera will only let me take 12 frames before it tells me that its memory is full. How can I recover t
You can try to get your images if you use an adapter for the memory card that connect to your computer then there is an application that recover files from a memory card \012\012Hope it will help ... Fuji Digital Cameras
Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???
Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera
Nikkon coolpix L1 After downloading memory card .. then putting back into camera. Reading says "cannot read memory card." Checked card out at store verified that it is good. Why does it not work in my camera now?
A couple things you might try.. remove the card carefully and check the position of the "lock" tab. Make sure it is fully in the unlocked position - not locked or a point between the two positions. Reinsert and try again.It sounds lie ... Nikon D60 Digital Camera with 18-55mm lens
My camera will not read my memory card anymore. It is only using the memory from the camera. How can I get it to read the memory card
Confirm first whether the memory card is still good or bad by using a card reader, put the camera memory card into the card reader then connect it to your system, see whether the system will read your card, if the system doesn't read it, it simply im ... HP Photosmart M417 Digital Camera