Having problems with your Kodak EasyShare CX6330 Digital Camera ?

Our zoom lens is stuck all the way out. The "motor" is still working but the zoom is still nonoperational.

Answers :

Fixing a Lens Error on a Digital Camera


This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Kodak EasyShare CX6330 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Our zoom lens is stuck all the way out. The "motor" is still working but the zoom is still nonoperational.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare CX6330 Digital Camera

Olympus FE-210 I dropped my Olympus FE-210 when it was on and the lens was out. Now, the camera still workes fine, but the lens will not close all the way. After I shut it off, it opens and closes as if trying to fix itslef, but tops after three tries. The zoom still works, but it makes a clicking noise as the lens adjusts. I wouldn't mind any of this, except that now I can't upload my pictures. Normally, when I hook up the USB, a screen comes up on the camera dispaying my options. Now when I ho

Dont drop it next time you ****** !!! ... Olympus FE-210 Digital Camera

Is there a way to "restart" my Casio Exilim EX-Z700? While I was taking a picture it seemed to freeze while it was trying to display the picture I just took - then, with the lens still popped out the screen stayed blank and it turned off, and now it won't turn on. The lens is still stuck in the "out" position. No buttons work. I tried to put it in the cradle to charge, and tried a different battery as well. Nothing works. Camera is dead!

Normally changing the battery solves this.Make sure you replace it with a good quality new battery and make sure it goes in the right way around as when you get in a flap it often ends up in the wrong way! ... Casio Exilim Zoom EX-Z700 Digital Camera

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

Zoom error The lens extends to maximum and motor keeps running when camera switched on, then lens retracts to about an inch then the screen says Zoom Error, also the zoom control doesn't work then. and there is no picture. Pictures already stored in camera can still be seen. But it seems there is something wrong with the zoom setting.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will ... Fuji FinePix S8000fd Digital Camera

A drink was spilled on my camera and now when I turn it on it takes a while for the lens to open all the way. Sometimes I have to force it open. It still will take pictures but if I try to zoom in too much it will freak out and say lens error. Also when i turn it off the lens covers are stuck and will not close. is ther a safe way to clean it?

Try using an electronics cleaner on the camera to dissolve and wash away any of the spilled drink. CLICK HERE for link for cleaners. Hopefully this will he ... Kodak EasyShare M853 Digital Camera

Digital camera got dropped into the sand, and some sand worked its way into the lens and focusing system, and now the camera cannot zoom or focus, but still turns on and takes pictures i have a lumix dmc fx12, and it got dropped into the sand at the beach. the shutter wont close properly, there's sand in the lens, and it won't zoom. Please help!! i don't know how to fix it!!


Panasonic DMC-TZ1 After switching on the camera Zoom will not work. i.e. stuck at wide angle. The screen says' remove lens cap and try again' After repeating that suggestion several times it will still not work. is this a warranty problem( I still have some left) or is it something I can fix?

I just had this problem, too. I basically disassembled the camera by removing the back cover, front cover, and top assembly. The top assembly includes a plastic part between a circuit board and the top external metal piece that houses the button on t ... Panasonic Lumix DMC-TZ1 Digital Camera

Sony DSC-S500 My camera is 10 months old. It's been working perfectly up until today. When I turn it on the lens closes. When I turn it off the lens opens. When I can get the lens to open half way as soon as I push the zoom button it closes. It's kind of like the lens is stuck. I've tried replacing batteries, I wasn't sure what else to do.

You are right it has defective mechanism,  a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes ... Sony Cyber-Shot DSC-S40 Digital Camera

A640 Lock-up Hi, The camera was working fine up until today when I took it out of the case, it was stuck, locked-up somehow. I haden't used it in a couple of days (had never had a problem with it before), and now, the only sign of life when pressing the ON/OFF button is the small green light underneeth turns on but nothing else powers up or happens. The only way to get the green light off again is to take the batteries out. Also, the lens is stuck open, and the zoom partially out. What should I

Take out the OTHER battery, the one that maintains the date / time and then the camera can 'reboot' cleanly when you put some fresh batteries in it. ... Canon PowerShot A640 Digital Camera

Dropping my cameras beside my table causing it not to power on tried some ways to make it open by charging but still no power and lens still didnt work it was stuck , what will i do will i bring it to repair shop? maybe it cost like to buy a new one pls.. help me..

Try the procedures in this tip. ... Digital Cameras

Dropping my cameras beside my table causing it not to power on tried some ways to make it open by charging but still no power and lens still didnt work it was stuck , what will i do will i bring it to repair shop? maybe it cost like to buy a new one pls.. help me..

Try the procedures in this tip. ... Digital Cameras

Dropped camera I dropped my camera very lightly now the lens are stuck. Is there any way to fix this without going to a repair? I just got this one week ago and the drop was so light. THe screen works it says Access though and then it says turn the camera on  & off i did this but it still doesn't help. But the menu screen & etc works. Please help, thanks!

Check this out\015\012\015\012http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Sony Cyber-shot DSC-W55 Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac

I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

Adding WD-40 Will adding a little bit of wd-50 to the camera zoom swivel head affect the camera? I probably should have sprayed it on a napkin and wiped it but I sprayed it directly on. But not much at all. But my camera has completely stopped working and its stuck with the zoom out and everything. But it might also be a battery problem since I dont have my battery charger and dont know if the camera died but I dont think it would die with the lens still exposed. I have a Sone DSC-W50. Please he

Gears hang up alot or the lens was banged while out make the lens stay out.. a tiny motor that drives these gears might be bad,\015\012might be a low battery, sometimes other errors make the camera just shut down with lens sticking out, I used ... Sony Cyber-shot DSC-W50 Digital Camera

My Ricoh R4 camera has its lens stuck in the fully extended position. After switch on, it makes motor noises for a while and then stops and switches itself off. Switching the camera on and off does not move the lens. Also, operating the zoom buttons does nothing. Having this great little camera working again would be fantastic!

Hi there,Make sure the camera is fully charged. Then try this: Turn off the camera and hold it on your right hand with the lens facing the ground. Then hit the camera's base on your left palm as you turn it on. You might want to do th ... Digital Cameras

I have a Nikon D40, which I recently dropped. :( Camera seemed okay, but then I noticed later that the 18-55 lens was being less than cooperative. It now is stuck on 55 adn will not zoom out. It still focuses (manually & automatically). My other lens, which was not on the camera at the time of the drop, works perfectly fine. Any suggestions on what could be wrong or how to fix it?

It sound like the lens zoom has broken.If other lens is ok and this lens still focuses automatically the conection is working.Sorry to bring the bad news but it may cost less to get a new lens than to get it fixed.Someon ... Nikon D40 Digital Camera with G-II 18-55mm Lens

My pentax optio 50 lens got stuck half-way and now the camera turns on briefly and then goes off automatically. I've replaced batteries and pushed the lens in manually, but it's still not working. Mary

This is tricky .. if you have no warranty, and have already managed to push the lens in.. I suggest pulling the lens outwards gently AS you simulataneously turn the camera on. You may be able to use a small suction-cup affixed to the lens to do ... Pentax Optio 50 Digital Camera

The battery died during the summer... so the lens were left sticking out instead of going back in. it stayed that way for 2 months because i left it at my sister's house. when i got it back, it was still out and i got batteries and turned it on. when i turned it on, it went in halfway and when i turned it off it came out fully, the zoom wont go far either. how can i get it to go back all the way in. its stuck. dont know why

Purchase an alkaline battery and replace with the old one, power up, wait for some time, select slideshow option, then back to camera view then power down..wait for 1 minute, power up again test your zooming results, if it is working well then all is ... Samsung Digimax S630 Digital Camera

When i press the power button, the LCD shows a blank screen and the zoom lens is stuck or seems so. i have tried taking out the battery and leaving it out for a while then putting it back in but still not working

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Samsung L210 Digital Camera

I bought a Polaroid i733 Digital Camera for my daughter in March, 2007. A couple of weeks ago when she went to change the batteries, the lens got stuck half way out. Now it won't work. By the looks of things on line, it looks like this is an inherant problem with this model. Is it still covered under warranty? If not, any idea what the approximate cost to fix it would be?

Interesting....you want ME to pay YOU either $10 or $15 to have you tell me how to fix it but if I've already figured it out, you'd like me to tell YOU for free....hmm, does my forehead say idiot!!!??? ... Polaroid Digital Cameras

My HP CA340 10.0 megapixels with 3x optical zoom lens only shows a white screen when I turn it on. I can still take pictures with great quality as I could before, I just can't see what I'm doing. It was working fine yesterday, when I turned it on, it seemed fine, then the screen randomly turned white. I would like to know if there is a way to fix this before I actually have to send it in for some one else to repair.

My CA340 turns on and off all on its own...makes the camera almost useless... I sent a trouble report to HP support...tho I doubt I'll get any resolution. Should have stuck with Canon ... HP CA340 Digital Camera

Stuck Lens I dropped my camera and the lens is now stuck, it will still take pictures but they are blurry. Is this fixable? It will zoom in slightly but turns off when I get to a certain point and is still blurry when zoomed. I've had it just over a year. It is a Samsung ES55 Digital Camera 10.2 Mega Pixel

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Samsung Digital Cameras

Basically the actual zoom lens is stuck out and wont go back into the camera, i have tried turning it off and on, but however still says "zoom error" and flashes red. i recently dropped in on the carpet and i think thats why the zoom lens is stuck out. please help

The lens maybe displace. Better go to a service center or an expert. ... Digital Cameras

DSC-HX5, Lens is Stuck in Zoom out mode. Turn On works but screen stays black. Automatically turns off after 10-20 seconds.

... Sony Cyber-Shot DSCHX5 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 1.7517 seconds