Having problems with your Kodak EasyShare CX6445 Digital Camera ?

I can not get the lense to go back into the camera


Answers :

Good day,

This is a common problem and sometimes can be fixed.
Please see details on my tip on how to fix this error here:

http://www.fixya.com/support/r7041378-digital_camera_lens_problems

Let me know if my tip was useful for your problem!

Regards
Repair Help & Product Troubleshooting for Kodak EasyShare CX6445 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Zoom error Today after using my camera for awhile the back screen displayed "zoom error" and a little sound whirled. Then the camera shut off by itself. I turned it on and off a couple of times, but without success. The lens is extended and will not withdraw back into the camera. I have taken out the batteries and re-inserted them. Finally, I gently pushed the lenses back to the body of the camera (as they seemed to be trying to go back to the camera), I am still getting the zoom error reading a


You may be true that sand must be creating this problem, as this happens very often. the sand enters into the lense assembly, creating friction in the movement. if this has happened total dismantelling and cleaning of the lense assembly will solve t ... Olympus Camedia C-350 Digital Camera

I have a Canon PowerShot S5 IS, and a few months ago I started getting a lense error whenever I went into phototaking mode. Every once-in-a-while when I went into the "view pictures" mode, the lense would retract itself, but when I tried to take pictures again, the lense would go out and "lense error. restart camera" would appear on the screen. A few weeks ago I finally got my camera fixed at a shop. I got the camera back and used it for about a week, now the same problem is happening. I've


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot S5 IS Digital Camera

I turned my camera on and the battery was too low so when it shut itself off the lense didnt go back in, now i've charged it and the lense is still stuck out. how to i get it back in so my camera will work


Here are the steps: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a so ... Kodak EASYSHARE M1063 Digital Camera

Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera

I sent my camera back to casio to get repaired under warranty because it wouldn't switch on. The service statement said they replaced the Optical lense. When I received my camera back and charged it. It still doesn't switch on.


You need to contact the repair department and let them know their repair was unsuccessful. Keep copies of all your paperwork. ... Casio Exilim EX-S880 Digital Camera

I have JVC Everio GZ-MG155 and until recently I was pretty happy with this camera. Few days back, I accidentally dropped it and now camera lense are stuck at one place (in zoom). Lense are not able to focus as well. I bought it from costco around 2 and half year ago and it is now beyond warranty time. I do not want to scrap it as I like it and it has good analog input functionality (which I use to convert VHS(analog) videos to digital videos). Is there any way I can fix it on my own or get


Hi,This has to be taken care by a Technician as this is a tricky Fix.If you could tell me your Location, i could try to Find, if some reputed shop that might charge you less amount.Let me know, so that we could proceed. ... Digital Cameras

The mirror dosent flip up when i press the shutter release button. it only happened once in a while but it happenes constantly now ( 300 pics later). ive tried removing and replacing battery. fresh battery. remove lense. i get no error reading. when i shake the camera i can hear something moving inside. if i smack the bottom of the camera it will work for a picture or two and then nothing. i dont beat my camera regularly but did it just to see if it would jar whatever is loose back in place. th


Hello.Something might be broken inside your camera. Does it have optical zoom function? What is the brand and model of your camera? ... Digital Cameras

Zoom Error While taking a picture of my daughter at Disneyland, I accidently dropped my camera, while in picture mode. It must have been about a 3 foot fall. It landed on the extended lense causing it to disalign itself. I attempted to push lens back into it's proper alignment. Now that I turn on the camera, I automatically get a "Zoom Error" fault in the LCD screen. Is it possible for me to fix it or what do you suggest? Thank you for your time and efforts..... Sincerely Alex Z.


Lens unit has to come out to see whether the problem can be sorted out without spares going in. But unfortunately you have to go from the back on this model which means disconnecting and removing all 3 pc boards and the LCD screen and then loosening ... Fuji FinePix S7000 Digital Camera

My Kodak V1233, isn't working right. If I turn it on, it will only turn on a second and extend the lense and then shuts off (it's fully charged). I can eventually get to take pictures, if I start by hitting the favorite button, and then the camcorder button and then quickly hitting the the camera button. I can take pictures, but can't see them, I only see a black screen. The camera will not power off this way. If I take the battery out, and then put it back in, and hit the favorite button,


I have had the exact same problem this seems to be a common flaw in this model i do not suggest any one purchase the V1233 ... Kodak EasyShare V1233 Digital Camera

I have a canon powershot SD 1000. The lense is stuck out. When I go to turn on the camera it says "lens error, restart camera". I don't know how to do this or how to get the lens back it. Help?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD1000 Digital Camera

The zoom lense will not retract back in, and i cannot take pictures. all i get when i turn the power button on is a black screen and the camera goes back off. it will only let me look at pictures i've taken, not take pictures.


Lens unit is failed,if u want to do fix yourselves dis assemble the camera, take out lens unit disassemble and replace the broken parts assemble to take picture. ... Olympus Stylus 7010 Digital Camera

The lense on my FinePix V10 is stuck on the out position and will not go back in when I turn my camera off. The screen says Focus error. Is there something I can do or do I need to take it in to be worked on. I love this camera and hope to be able to get it repaired. Is this possible? I have had it for about 2years.


Hi, \015\012\015\012\015\012This error indicate that focusing ring got stuck or jammed due sand, dust, may be due to external shock caused by dropping the device. What you can try to do is spray some compressed AIR into the lens to try to free ... Fuji FinePix V10 Digital Camera

E18 error I just had my camera serviced for a bad CCD imager. When I turned it on the first time, after coming back from factory repair, I get an E18 error. Looks like the lense won't come out??? What do I do to use my camera in good working order again?


Greetings sandrak2,\015\012\015\012As frustrating as it might be, I would suggest directly returning to whatever repair shop you had it serviced by and demanding they redo the fix. It is not acceptable for a unit to be sent in for servic ... Canon PowerShot A70 Digital Camera

Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera

I can not get the lense to go back into the camera


Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:ht ... Kodak EasyShare CX6445 Digital Camera

Hello there, i have a tm700 from panasonic and it seems like the camcorder has some focus or depth of field issues, it always been working good until last week when i turned it on everything is out of focus, i tried geting focus back with auto focusand tried it with focus ring but it just seems impossible. only things that are focus are the things about an inch from the lense and i can get it focused if i zoom in a little... its odd because nothing really hapenned to the camera that could have


Inside the lens assembly, the focusing ring is controlled by electromagnets with feedback from the microprocessor and CCD sensor. Many things can effect the focusing circuit, but the most likely things would be any dirt, dust, or lint obstructing t ... Digital Cameras

I have the standard 18-55 zoom lens that came with the Nikon d3000, and now no matter what autofocus setting I have the camera will not autofocus. Manual focus is fine though. I do tend to switch lenses fairly often. Please get back to me as soon as you can


The kit lens sold with the D3000 has 2 switches. One is for Vibration Reduction (VR) "On" & "Off" and one directly above it for Focus marked simply "A" and "M" (Automatic and Manual) See the image below: ... Nikon D3000 Digital Camera

Can anyone tell me how much it costs to have my fx12 serviced? The lense won't open and I get the message to turn the camera off and then back on again. Thanks -Cindy


You should phone a local repair shop or Panasonic service center. If you're not against sending it to Latvia, I can offer ir for 25$.Tom ... Panasonic Lumix DMC-FX12 Digital Camera

I have an olympus digital camera fe-170. when i turn on my camera, the lense come out and the LCD screen is black, when i try to turn it off, it doesnt turn off, but after like 10 seconds it turns off by itself. but when it turns off the lense dont go back in?! then when i try to turn it on, its the same thing. when i plug it into the computer, the lense go back in, but when i unplug it from the computer and try to turn it back on again...SAME PROBLEM. i did drop it before, but can i do anything


The lens is bad, needs to be replaced. Maybe purchase camera on ebay with broken LCD but good lens. Replacement can be time extensive. Will need #00 or #000 phillips screwdriver and solder iron. Remove 6 exterior screws+2 inside battery door. Take of ... Olympus FE-170 Digital Camera

My camm! I have an olympus digital camera fe-170. when i turn on my camera, the lense come out and the LCD screen is black, when i try to turn it off, it doesnt turn off, but after like 10 seconds it turns off by itself. but when it turns off the lense dont go back in?! then when i try to turn it on, its the same thing. when i plug it into the computer, the lense go back in, but when i unplug it from the computer and try to turn it back on again...SAME PROBLEM. i did drop it before, but can i do


I think thy will say you, replace lens unit. but lens is very expensive, so we can buy new one camera. I have the same problem, i found focusing lens wheel teeth slipping, no parts available, so i covered a gum coat on the teeth. ... Olympus FE-170 Digital Camera

I have a Minolta Maxxum 5D which I really like. I take a lot of pictures outside with my job. I have a telephoto lens and a regular lense as well. I switch lenses a good bit depending on the shot. Everything was working well until I now get a message that reads "no lens attached" when there is a lense on the camera. The weird thing is that I only get this message on my regular lense and my telephoto lens works fine. I even carried my camera by a local Minolta/Konic dealer and they were baff


It can occur if the contacts on the lens where they meet the contacts on the camera body need cleaning. Try a cotton swab lightly dampened with rubbing alcohol. ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

The lense on the camera wont go back into the camera, I tired turning it off and on several times, the lense goes back partway but then pops back out


Good\012 day,This is a common problem and sometimes can be fixed.Please\012 see details on my tip on how to fix this error here: ... Kodak Easyshare C813 Digital Camera

My Camera is Canon 40D with EFS 17-85mm lense. I am having 2 problems,1.when I zoom the lense at 85 at 'AF' it doesn't get the focus, some times it get focus but picture got blurred.2 after capturing some pictures an error appears 'err 01'the contact between the lense and the camera is faulty. i need some immediate solution


Your flex cable to the Iris is broken. Have a look at my gallery at http://www.pbase.com/barry_2718/efs1785mm I have the same symptoms. At 28 or 35mm it make wor ... Canon EOS 40D Digital Camera

I was at a game shooting pictures with my Canon rebel EOS xsi a friend picked up the camera... started shooting pictures and when he handed the camera back the autofocus wasn't working and the shutter would only occasionally close. How do I get back to the original manufacturers settings... I think he may have played with the buttons when he was trying to get the shot... so th setting may be off... I'd like go back to the original setting and try it from there


Restoring the default settings is pretty easy.Please refer to page 100 of this manual(right-click here and click save target as to download) ... Canon EOS 400D / Rebel XTi Digital Camera

Lost pictures I had pictures in my camera that were very special to me. I believe when deleting some photos from my camera, I accidentally deleted them all. I have no idea whatsoever how to recover them either. I had taken some other pictures and kept them on my camera so far, but really would love to be able to get the lost ones back. This occured on January 1st. Is there anyway to get them back? Please help!!!


The previous advice is nonsense! The only data which cannot be recovered is from cards which have been physically damaged in such a way that the card cannot work or data which has since been fully overwritten by new data.xD cards used to ... Olympus Stylus 720 SW Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3176 seconds