Having problems with your Kodak EasyShare CX7430 Digital Camera ?

Push to eject mechanism failed


\015 I just removed the card by pushing it n i was successful, but while inserting back the card i couldn't n by applying force i was able to insert it again. but today when i wanted to eject it again i failed and i had to pull it. Will my camera work with the memory card or not. Please do tell me\015

Answers :

Repair Help & Product Troubleshooting for Kodak EasyShare CX7430 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Push to eject mechanism failed


... Kodak EasyShare CX7430 Digital Camera

The memory card is loose but fails to pop out, appears to be mechanical. You can push down on it but seems like it's clip doesn't release, on my Panasonic DMC-FX01.


Hi, \015\012\015\012They are usually \015\012\015\012click-push-click ( push to click in, then push in again and it clicks to release back out again )\015\012which I am sure you are well aware of this, just to reiterate ... Digital Cameras

Loaded a cd to upgrade firmware, firmware would not load. eject button would not eject. read manual, says to push eject at the same time you plug in the electric cord,still would not eject. Any suggestions?


Hi,I assume that the CD is stuck in your computers CD/DVD drive.Find a large paper clip or safety pin and straighten it. Look very close at the front of the drive for a small hole. On a laptop the hole is usually located ... Digital Cameras

Panasonic nvgs120 digital camcorder will not eject tape...when eject button is pressed the machine makes the few mechanical noises usually associated with the tape being ejected but nothing happens


First of all check out is the battery old or new. if its old then this problems happens. so replace the battery. but if the battery is new. then check out is it properly charged or not. if not charged then this problem happens. charge the batte ... Digital Cameras

Hi, the flash card card-eject lever spring is broken and wont eject the card. u have to manually push the card in place and pull the card out. the lever stays up until u shut the card slot door.once the card is in place the camera can read the card if images already exist. but...it will not record an image and shows up as blank on the screen after the shutter takes the image? is this the cause of the broken eject lever. thanks.


I have the same problemI think that the reason that the not record the image is that the card slot door is pushing down on the card eject lever and ejecting the card when the door is closedThe only answer I can think of is to shorten the leverdavidh ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

When power button is pushed, the lens tries to extend but only starts to open the lens cover blades, then fails, beeps about 8 times, monitor turns on briefly then off. This started out with camera failing to focus and sometimes powering off without retracting the lens


... Olympus C-7000 Zoom Digital Camera

My olumpus XD-Picture Card is stuck in my laptop. It is the kind you pop in, and then press slightly to eject. It does not respond to being slightly pressed (pushed) to eject. I have been unable to dislodge it with tweezers, and it is a snug fit so tilting the computer does not work (gravity is useless since it is not loose).


It's fixed. I took a key-chain-size Kroger card, cut it so that it could fit into the slot under the card, put a piece of tape so that the sticky side sort of grabbed the card, took the tweezers and pushed down slightly on the top of the card while ... Olympus D-535 Zoom / C370 Zoom Digital Camera

It wont charge , and i dunno what is the problem . is it the charger or the battery . and i used to transfer photos by taking out the memory card SD then suddenly when i put it back it wont fit anymore .i push and push it but it was failed to fit in it again .


Make sure that you have the Sd card turned the right direction. It only goes in one way. Do not force it!Check all the connections on your charger and make sure it says it is charged. The battery is more likely to due than the charger. ... Nikon Coolpix 2000 Digital Camera

Lense problem When i turn the camera on in picture taking mode the lense does not come out all the way and if i push it again it still does not come out and then when i push the power button a third time it closes the little bit it opened... but not all the way. However if the camera is in play mode and i turn it on, the lense comes out all the way just fine... then goes back in on its own and i can view the pictures. Because of this it appears the mechanism is working fine but there is maybe


Dear jmgrev,\015\012\015\012Whenever you turn your camera on and your lens doesn't go in and out properly you are likely experiencing a lens error of some sort. Look for an error 18 or a "lens error restart camera" message. If either of t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

WILL NOT POWER ON ALTHOUGH TAPE EJECT MECHANISM WORKS OK THIS IS THE ONLY SIGN OF LIFE ON THE UNIT


Hi there\015\012\015\012Please provide the make and model of the camera.\015\012\015\012Please do not rate this solution or your reply will not be returned to me. Thanks. ... Digital Cameras

The tape carraige doesn't pop up when ejecting and doesn't close when pushing down


... JVC Digital Cameras

My camara Nikon D60 didnt work correctly it seems like the trigger (when you push the button to take the picture) didnt finish like if it stuck it and i need to do it 2 times to take the picture. the image only show half of the picture and a technical told me that it is the cart the do the movement of the mechanical system


Drizzle a small amount of isopropyl alcohol mixed with WD-40 down into the switch. ... Digital Cameras

My canon vixia hv30 camcorder is not reading tapes anymore. It rewinds and forwards and reports the tape position but the tape counter does not roll showing only dashes as if the tape is empty. All this started when i put in a cassette in which the tape has somehow become crunched. There was some pushing involved and the camera auto-ejected teh tape a couple of time before i realized that the tape inside was crunched. I then straightened the tape by pulling it partly out and rewinding it manual


First off how long have you owned the camera? It sounds like damage to the recording head has been done. This can only be repaired by a qualified professional. Follow this link to start the repair process through canon. You may also try other indepe ... Digital Cameras

Cannon zr300 after the loading mechanism ejects there is a long beep sound?


... Canon Digital Cameras

I cannot turn the camera on. I guess it was dameged during my holidaying. I recall that, the camera was excidently turned on inside its holder and as the mechanism tried to push the lense out from the body it was blocked by the bag holding the camera. Now, when I try turning the camera on, the lense could not move forward at all. It gives cracking noises and turns itself off. Could this problem be fixed or better to buy a new camera? Arthur


If your camera isn't under warranty, I think that it has no worth to repair it by the after-sales.\015\012But you can try to fix it by your self, anyway there will be no loss for a bad camera.\015\012May be this post will be any helpful: ... Pentax Optio 60 Digital Camera

Recently my rebel xt has had problems with the CF memory card ejector button. It seems to be physically loose from whatever mechanism ejected the card from the camera. How do I fix this?


If your CF card is still inside the camera, and if the eject button does not pop up anymore, try to push the CF card until the button pops up again. The normal scenario is that when the CF card is inside, the button should pop up. If the CF card is ... Canon Rebel XT / EOS 350D Digital Camera

I know the batteries are fresh, have tried several rounds of 4 new batteries. But, when push On/Off button it fails to respond. Nothing happens. Cannon PowerShot A610. Can confirm camera has never been wet and I take good care of it. 2nd time happening, 1st time lasted only overnight but now camera hasnt turned on in days


Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:\015\012 ... Canon Digital Cameras

When turning off the camera, the lens does not retract. I also get an error message "SYSTEM ERROR (ZOOM)" and another one "PLEASE TURN THE CAMERA OFF AND THEN ON". Once the camera is turned on, I can hear the lens mechanism working, but obviously failing.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic DMC-FX37 Digital Camera

I can't get the memory card to stay in the camera. The eject buttom pushes it out.


You haven't said which KM model you have. But on most of them one push on the eject button makes the eject button pop out in order to be ready to use on the second press which ejects the memory card. After pressing the button all the way in to eject ... Konica Minolta Digital Cameras

Camera lens movement mechanism seems to be damaged, as when switched on, the camera lens does not extend out completely and the object appears blurred on the screen. Similarly when switched off, the lens does not retract back completely and it needs a manual push to put it in a little more. But even then it does not go in fully. Rest of the functions are working well. The damage is the result of an accidental body weight going on the camera, when it was in on condition.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

SUDDENLY FAILURE AFTER TAKING 2 PICTURES THE CAMERA STOPS RESPONDING, THE LCD IS "BLACK" THE LENSES OUT OF CAMERA. REMOVE AND INSTALL THE BATTERY DON'T CHANGE THE STATUS. THE BATTERY IS FULL CHARGED. BY PUSHING ON/OFF KNOB I SEE THAT THE GREEN "LED" BLINK, I HEAR "PIPS" AND SOME MECHANICAL NOISES. REGARDS MOSHE


Need more detail. ... Casio EXILIM Card EX-S770 Digital Camera

Panasonic Model PV-L4530. Tape door will not open when eject button is pushed. Digital camcorder runs for about seven seconds and then shuts down.


... Panasonic Digital Cameras

I have a JVC GY-DV5000 camera and two faults have developed. On occasion tapes get caught in the eject mechanism and end up sideways, these have to be forcibly removed. I also sporadically get a warning to clean the heads but am getting drop out even after a head cleaner has been through the camera.


... JVC Digital Cameras

The mechanism to open the slot for the mini dv tape wont open. An eject symbol is flashing on the screen and it says C:32:11 in the top right corner.


Hi\015\012 \015\012The error that you are facing usually comes in Sony Digital Camera’s. To remove the error please remove the battery, re-attach it, & then power it up. The camera should start fu ... Digital Cameras

When I connect my camera through any USB port on my macbook, the transfer process will always begin fine, however the process will not complete. I get a "failed to transfer the image" error message as well as an inadvertent USB device ejection message. Is it the camera? cord? card?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Olympus Stylus 830 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0494 seconds