Having problems with your Kodak EasyShare DX4530 Digital Camera ?

Faulty dial switch?

\015 I believe it needs a new dial switch? Whenever i move it to a new settting it sometimes dosnt switch. When I switch it to off, it doesnt turn off. And at times it will flash on the screen as if i am swtiching between two settings back and forth, when I am not.\015

Answers :

Go to a good electrical component store like The Source and buy a can of Switch Contact Cleaner and spray it into the dial making sure you remove the batteries first. Then give the dial half a dozen turns each way. Leave it for 30 minutes and then re-install the battery.
\015\012
\015\012Sometimes you need to move your grip on the camera, so your fingers are not near the dial when shooting.
Repair Help & Product Troubleshooting for Kodak EasyShare DX4530 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Faulty dial switch?


Go to a good electrical component store like The Source and buy a can of Switch Contact Cleaner and spray it into the dial making sure you remove the batteries first. Then give the dial half a dozen turns each way. Leave it for 30 minutes and then re ... Kodak EasyShare DX4530 Digital Camera

My samsung NV10 beeps 4 times and switches itself off every time I switch it on.The battery is fully charged,if I turn the top dial to play, it stays on and plays the photos the way it should but when you turn the dial to any of the other icons it beeps 4 times and switches off


... Samsung NV10 Digital Camera

I want a list of the likely different faults which can cause an Olympus C-5060Z not to power on. I'll do the rest. A wiring schematic would help too. I am aware of possible cause being the On/off switch under mode dial and how to replace that, and have a new mode-dial/power switch part, but while the camera is open where the switch can be function tested at ribbon cable connection, I need a check-list of the other most likely causes in the order of most likely to least likely. That means any


Here's an excellent blog about dead camera problems:\015\012http://camerarepair.blogspot.com/2007/11/simple-fix-for-de ... Olympus Camedia C-3040 Zoom Digital Camera

MRS. I believe it needs a new dial switch? Whenever i move it to a new settting it sometimes dosnt switch. When I switch it to off, it doesnt turn off. And at times it will flash on the screen as if i am swtiching between two settings back and forth, when I am not.


I checked to see if there was firmware available for free download. Unfortunantly not. The alternative is a KODAK repair for this fault. \015\012However due to spare part shortage this model is no longer repaired. Instead KODAK offers a trade u ... Kodak EasyShare DX4530 Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac


I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would


Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

My olympus c8080 camera's mode dial is stuck to video mode even if i switch the dials to other available mode and scene mode.it only has video function all throughout the mode dial. what repair should i do?


... Olympus Camedia C-8080 Wide Zoom Digital Camera

Hi, I've a Sigma 28-105mm aspherical 3.5-5.6 lens. Auto focus does not engage. I can hear the motor trying, but the ring does not turn. When I switch to manual focus, I can turn the ring to focus manually, but I still hear the motor trying to use autofocus. Additionally, sometimes the shutter will not fire in manual focus while the motor is still searching. I've cleaned the contacts, but no joy. I suspect a faulty switch, but that doesn't completely explain the autofocus not engaging. I am


Well, I think you have at least one problem pinpointed, in that I suspect the focusing ring is jammed, and cannot rotate with the electromagnet signals. The other problem might be a faulty auto/manual switch. Of course, check for oxidation and e ... Digital Cameras

My shooting mode dial is not working properly. when i switch the mode dial to auto it show as manual on my LCD. camera type is powershot A580. thanks


... Canon PowerShot S500 IXUS 500 Digital Camera

The dial on top that switches from portrait mode to action and other modes turns, but it seems to be "stuck" in portrait mode. The portrait icon shows on the lcd screen, and doesn't change when I turn the dial to other modes. And my pictures look terrible.


... Olympus Camedia C-5060 Wide Zoom Digital Camera

Faulty Picture Setting Dial


Hello,\015\012\015\012I have the same issue with mine. I usually just leave mine on Auto but half of my pictures end of taken in Portrait which causes image problems.\015\012\015\012They sell the dial on E-Bay for about 5.99 ... Sony Cyber-shot DSC-W70 Digital Camera

Mode dial does not switch modes


... Konica Minolta DiMAGE Z5 Digital Camera

The Mode dial on my MAXXUM 7D does not operate. I cannot switch it from manual mode to any other mode (i.e. Program Mode).


... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

The dial button to switch among audio, camera and


... Genius G-Shot DV1210 Digital Camera

Lubricant Does the lubricant go right in between the dial and power switch or should I take apart the camera?


I think, lubricant is not so intelligent to reach there. ... Sony Cyber-Shot DSC-F828 Digital Camera

Dial knob The camera seems to be frozen - only shows Digital Camera message on screen when switching on


I have the same prob please help ... Goodmans G-Shot 3021Z Digital Camera

I purchased my G11 end of Nov 2009, and just started to have problems this morning. When shooting, the directional buttons, control dial and func/set button won't work. Also, if I zoom in on a subject the camera automatically zooms out, in, and out again... randomly, as if it had a mind of its own. When viewing photos already taken, the same problem happens. Once it happens, none of the buttons will work. This happens about 1 minute after the camera has been switched on. Is there a way in which


It could be a bad battery. Try using AC power or getting a new battery. What is the temperature. if it's cold try bringing the camera slowly up to room temperature. ... Canon PowerShot G11 Digital Camera

When the camera is switched on it shows only memory card photos but in the camera mode it does not shoot photographs. I sent the camera to Canon Repair center, they told its optical assembly is faulty and it will cost Rs 5000/- which is more than the cost of new camera


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter (a.k.a. "faulty optical assembly") are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck clo ... Canon PowerShot A85 Digital Camera

After leaving my Sony DSC-T2 camera unused for only a couple of days the battery was flat. I recharged it fully but again it only lasted a day or two. I assumed the battery was dead and I purchased a new Sony NP-BD1 battery and charged it correctly. This new battery is behaving exactly the same as the old one, only holding a charge for a day or two at most. It seems the camera is draining the battery when it is switched off, or maybe the charger is faulty ??? Any ideas?? many thanks - Geoff


If the troubleshooting section in the back of the user guide doesn't help, I sugget getting in touch with Sony and asking them if it's normal, the only thing I can suggest in the meantime, is taking the battery out while it's not in use, or recharge ... Sony Cyber-shot DSC-T2 Digital Camera

NIKON D60 WHEN SWITCHING ON MONITOR SHOWS ERROR- TURN CAMERA OFF AND THEN ON AGAIN- VIEW FINDER SHOWS BATTERY INDICATOR FLASHING. BATTERY IS FULLY CHARGED COULD IT BE FAULTY. HAVE JUST RECENTLY DELETED 500 PHOTOS IN ONE GO HAS THIS AFFECTED SOMETHING.


Remove the battery and the memory card, then restart the camera without putting the card inside, and with a battery that you know is charged.If it happens again, it could be the battery that is faulty and is not keeping charge, try testin ... Nikon Digital Cameras

The dial doesn't switch between modes when on. I have to run camera off, change the mode (i.e. from P to SCN) then turn the camera on. The camera no longer shows all photos on card when I use the review option.


Go into the menu and find "reset" follow the on-screen instructions. ... Panasonic Lumix DMC-FZ5 Digital Camera

F-stop issues when i set the camera to the M setting on the dial, the only thing its letting me adjust is my shutter speed and ISO. I can't find a way to also adjust the aperture setting. I can do everything else, but not that. And if I switch to Av, I can't set my shutter speed.... help!


See pages 36&37 of the manual.If you haven't got one, you can download it here.In M mode...Turn the sel ... Canon EOS Rebel T2 with 28-90 lens 35mm Film Camera

I have a cannon powershotA720 IS & it won't keep the date & time so I have to reset it every time I switch it on. Can you help me or is it a faulty camera


You need to replace the date battery -- a button-style battery, CR1220. This battery is in a holder which fits into a slot right next to the regular batteries. Pull the holder out and be sure (for this model) that the negative side is up when putting ... Digital Cameras

I am getting a prolonged grinding noise when i turn my panasonic dmc-tz1 on this varies in time length as i switch on and off also seem to be getting a lot of blur that i didnt have before as i only get the noise when dial is in taking photo mode and not playback i assume its something to do with focus / shutter any help appreciated .


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ1 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0432 seconds