Having problems with your Kodak EasyShare DX4530 Digital Camera ?

Installed new batteries.lens wont retract camera wont turn on.

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare DX4530 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installed new batteries.lens wont retract camera wont turn on.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EasyShare DX4530 Digital Camera

Camera wont turn on. I have new battery, installed correctly, but it won't turn on. I have had this camera for a while now

Make sure your battery is new or you have a good recharged battery. If the camera will not turn on, you then have no choice except to have it sent for repairs. The camera may not be worth the difference to repair compared to a new one. You can ... Canon PowerShot A460 Digital Camera

My kodak easyshare m1063 camera has a nwly charged, new battery, and the camera wont turn on and stay on. The lens comes out and retracts immediatley and shuts down!

... Kodak EASYSHARE M1063 Digital Camera

Wont turn on, shutter open at all times When I power on the camera, the shutter lens trys to open but it can't. I've purchased a new battery and fully charged it. The camera was purchased in May 2008. I've only used it about a dozen times. The last time was Christmas of 2008. Can you help ? Lens won't retract

... Olympus FE-280 Digital Camera

Camera will not turn on or off. i have installed a new battery with still no response from camera. it is a 712is At first it would shut off without pulling back lens but now wont even power up at all.

Please make sure the contacts for the batteries are clean and touching the two ends of the batteries. If not Clean the contacts and make minor adjustments with a small screw driver.\015\012\015\012GOOD LUCK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ... Digital Cameras

Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera

I have a cannon powershot A530 camera. It wont turn on even although I have changed batteries. The lens is still projected. the batteries are in the right positioon and iI have now installed new rechargeable battries which are fully charged.

Chances are there is either a disconnected wire form the battery contacts or you have a chip that has gone bad. if you feel comfortable opening the case look to see if the wires around the contact are still attached(they should be soldered) if they s ... Digital Cameras

Camera lens is stuck out and wont retract. Camera will not turn on. It will charge but even though it seems to be fully charged it still wont retract the lens and turn on.

Your camera has a lens error ... Kodak EasyShare M1033 Digital Camera

My canon powershot A640 wont turn on despite having new batteries installed, also the USB connector socket has fallen inside the camera, will this cause a short that will stop it powering

Yes, you are probably right. A short within the camera could make it "un-startable. Take it to a local electronist or a Canon dealer and they will help you solve this problem. Also check if the batteries are good and fully charged. Some new batteries ... Canon PowerShot A640 Digital Camera

My sony cybershot camera (dscw1) wont turn on. even after installing new batteries.

... Sony Cyber-Shot DSC-W1 Digital Camera

Hello, I have a Kodak easy share z1275 and has worked well for me for almost 3 years. Used it last week with no problems, has never given me any problems. Suddenly on Saturday, I turn it on to take a picture, lens begins to retract and the camera shuts off, it appears that there is a power supply probelm. I changed batteries, even though the ones I had in it were recently installed, but went ahead and put in new ones, and it will not power on. The blue power indicator light begins to come on

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z1275 Digital Camera

FinePix E500 Camera wont power up! instaled new batts etc but to no avail! When i turn it on, the green light comes on for a second and there is a twitching of the lens then nothing, Can someone help me PLEASE!

Something interesting...\015\012if you hold down the back button while turning it on it beeps and the screen flashes black.\015\012what i would sugjest doing\015\012would be to open her up if you are skilled with electronics and see ... Fuji FinePix E500 Digital Camera

Ive had my camera for almost 7 months now and just recently it stopped working it wont turn on. i thought maybe it was the battery so i bought a new one and a new charger but still doesnt turn on. if i have my camera connected to the wall charger it turns on but when i dosconnect it it powers off and doesnt turn on at all.. i dont know how to fix it.

Dear put your camera and bettery open in Sun light for some time and then charge it.ok,and also reply me. ... Kodak EasyShare M530 Digital Camera

My fujifilm finepix f480 is brand new and i've only used it about 4 times. Without any incident to start a problem, the charger stopped working and the camera wont turn on at all with the battery in it. The charger light will go on for about 2 minutes and then turn off, and the camera light wont go on at all with the battery in it...is this the camera or the battery or the charger?

Looks to me as charger issue. Digi cam dont work if battery is very low... forget about flash. Also check the input voltage for charger as it should be compatible with power supply at your home. ... Fuji Digital Cameras

Sanyo E1075 Digital camera was drop while turned on . One picture was taken then camera shut off not retracting the lens. Lens is still not retracting and camera wont turn on.

Without opening the camera. I can say there might PCB contents broken or lens barrels problem ... Digital Cameras

Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the

Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera

My new windows 7 wont except my s1600 fuji finepix camera...i installed the software that come with the camera, i have also unistalled the cam and reinstalled twice just to make sure.....also i get a screen that says there are no new pictures to be downloaded from my camera, and my memory card is full. this is a brand new camera???? help

Dobrý deň.,chcel by som sa spýtať \302\236e aký program si mám nainštalovať k notbooku Samsung R730 a mám foťak FUJIFILM FINEPIX S1600 aby som vedel pozrieť a nahrať si nafoten&e ... FUJIFILM FinePix S1600 Digital Camera

Charge battery install battery, turn camera on after 10 seconds camera turns off and yellow light blinks. installed new battery same results ????

I suggest remove the batteries and wipe the camera contacts firmly with\015\012a dry cloth (heavy corrosion may require cleaning with a wire brush,\015\012steel wool, or sandpaper). Remove any residue that may have fallen\015\012into the batt ... Digital Cameras

My kodak camera wont turn on.. theres nothing wrong with the battery and nothings wrong with the camera its new! it worked for a few days and now it wont turn on

... Kodak EasyShare C142 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I have a Polaroid digital camera !533 and it wont turn on. it worked fine untill i let my little sister use it now whenever i turn it on, the green light comes on it makes a noise, and the blue background comes on and the camera pops out but then it just shuts its self off, how do i fix it? the batteries are new, and she didn't drop it cause i was sitting right next to her when she was using it... whats wrong with it!?! it's new, it should still be working.!

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Polaroid I533P Digital Camera

I have a samsung digimax A402 camera. I have never had a problem with it powering on until now. I have placed brand new double A batteries and when I press the power button on the camera the screen tells me my battery is low and the camera powers off. I have tried different brands of batteries as well. What is the reason my camera will no longer turn on and stay on with new batteries installed?

My camera did exactly the same thing. I found that there was a minute trace of corrosion on one of the battery conections inside the body of the camera. After cleaning up the contacts to remove the corrosion the camera powered up without fault. It di ... Samsung Digimax A402 Digital Camera

This Sucks! My camera is new, I went to use it...actually for something I saw that was hillariious...and I turned it on, the lens came out...it was zoomed all the way, and I could'nt take the pic nor could I adjust the zoom. Then I got this hateful message to turn camera off then on again, which I did. Now the lens does not return apon turning the power off, but does retract and come back out when I turn it on...and then the same scenario! Help Please!!!!!!!

I think this is just a hardware malfunction(some mech. switch) because, i have a lz7 and when i deliberately open the battery case with the camera power on it obviously switches off and then when u close the battery case either with the power on or o ... Panasonic Lumix DMC-LZ7 Digital Camera

Installing camera hi..i have a question. i dont know if yall are who im supposed to ask, but im going to give it a shot. okay, so i have a i634 polaroid digital camera. well, it has worked fine for the last month..now all of a sudden, when i try to bring it up on the computer to get my pictures, its saying that it isnt hooked up right or its not turned on...it is turned on and is hooked up right. usually as soon as i turn my camea on, it will automatically say *new hardware found*, but its not d

My batteries are fully charged,but my camera is makeing a beeping noise like thier not charged and it always used to tell me to replace the batteries and now it dosent ,it just wont turn on.what do i do? ... Digital Cameras

Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail

Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4380 seconds