Having problems with your Kodak EasyShare DX6490 Digital Camera ?

The toggle in the middle of the mode selector does not respond any more.


Answers :

Hello, Well I work on these DX6490 Kodaks as a hobby, I guess I am a sucker for punishment !!!! These guys all have problems with the small joystick you are referring to. It was just not designed or built for the long haul. As they age the problems begin to show. Not a cheap repair. Time to think about a newer camera, sell yours on E-Bay for parts, It will probably sell if the camera is in good condition.
Best Regards, Russell
Repair Help & Product Troubleshooting for Kodak EasyShare DX6490 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The toggle in the middle of the mode selector does not respond any more.


Hello, Well I work on these DX6490 Kodaks as a hobby, I guess I am a sucker for punishment !!!! These guys all have problems with the small joystick you are referring to. It was just not designed or built for the long haul. As they age the problems b ... Kodak EasyShare DX6490 Digital Camera

The 'selector' mode that moves between recording, camera modes etc. won't move from the recording mode. Worked great this morning. Videotaped entire disc but now cannot move that green-light selector. HELP!! It's a borrowed camera and I don't believe I pushed anything I shouldn't have!


Well, this could be a problem.. This usually happens if the camera has been dropped or bumped hard? If that hasn't happened, then all you can try, is to Take the battery OUT, wait a min or so, and replace batteries, This will cause all to be "Reset" ... Digital Cameras

Only about half the modes work on mode selector dial


Sounds to me like the internal contacts aren't working correctly. Let your local camera store take a look. Hope it's under warranty.  ... Canon EOS 400D / Rebel XTi Digital Camera

When I turn on my camera in camera mode, it says memory full. I go to the middle selection to delete some photos and the camera freezes. It won't go to menu, it won't go back to camera mode or video mode. It just freezes. I can't even turn it off unless I take out the batteries. It is a Concord 4363Z model. I think it has a reset button but I am not sure how to use it. I can't find my manual for this camera. Thanks.


Go online and google search for \015\012\015\012Concord Camera Eye-Q 4363z Digital Camera owner's manual. You should be able to download a copy fro ... Concord Camera Eye-Q 4363z Digital Camera

My camera is stuck in setup mode. I have tried to reset using reset button, removed aa batteries overnight, and still stuck in setup. My apple computer still recognizes the camera using usb, but cannot get it to regular modes (the round selector on top does not seem to work when changing settings)


Https://eservice.sony.com/webrma/web/index.do?SR=nav:service_support: ... Sony Cyber-Shot DSC-W1 Digital Camera

Not responding i was in the middle of taking pictures and my camera shut down. thge screen is black and the lens didn't retract. i've tried replacing the batteries, plugging it in the computer, and trying to turn it on repeatedly. the camera willl not respond nat alll and now i cannot only not turn on the camera but get the lens to go back in place


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012\015\012 ... Canon PowerShot A530 Digital Camera

When I slide the Mode Selector to ON, I get the COOLPIX screen, then the SYETEM ERROR message comes on the screen.But when I go to Playback Mode, I can get my pictures from the Memory Card, on the screen.


Hi.You have a fault that is detected only when the camera is in picture mode.For that reason the camera is still working on Playback mode.This often happens when there is a lens error, or when the CCD sensor is fau ... Nikon Coolpix 2500 Digital Camera

A still picture has been taken(by mistake) and is being displayed through the projector. I am unable to get rid of the still picture. It toggles over to the computer but when I toggle back it still only displays the still picture. How do I remove this snapshot from being displayed and be able to display the camera mode?


... Avermedia AVerVision CP300 Digital Camera

I have a Sanyo VPC C6EX 6megapixel camcorder which, when switched on, immediately takes a photo in 'camera' mode without any prompting. After that, it will not take a photograph in normal operation. I have moved the switch between REC and PLAY and tried both camera and video modes, but neither will respond when buttons pressed. Switch the camera off, and then back on again, and it still takes a picture automatically without warning....! Indeed, the camera seems to be 'confused'?...even in ME


Check if any of the button on your camera is remaning slightly pressed internally.if it is pressed make it proper .also tap the sides of your camera slightly for two minutes.then ON the camera and check out.\015\012if this does not helps.it the ... Sanyo Digital Cameras

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with


It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

Shutter Problem I have an Olympus C-750 that I was in love with until 5 days before my vacation when the shutter button decided to stop working. Zoom in and out still works, but the shutter will not respond to the button or the remote. The other strange symptom is when I turn the camera on, it snaps a picture (and then won't take anymore). Thought I might have managed to put it in a certain mode or hit some magic series of buttons to put it in this strange mode, but I can't undo it. Tried changi


I had an Olympus C-3000 this same type of sympton happened to me. I sent it off to Olympus to be fixed (via local camera dealer). When it came back, after about 10 shots, it failed again the same way. Back to Olympus a second time. Came back and fail ... Olympus Camedia C-750 Ultra Zoom Digital Camera

I have a Cannon Powershot S230. The mode selector is loose.


Go to the store to fix it ... Canon PowerShot S230 / IXUS 179 Digital Camera

Mode button does not toggle run options


Make sure the on-off-aim switch is snapped onto the arm of the swich on the PCB ... Moultrie GameSpy 4.0 Digital Camera Deluxe

Can't toggle between auto, manual, video modes


The switch is an assembly that can be replaced, the question is can you get the part? make a cam off ebay with a busted screen. chances are the board is OK ... Canon PowerShot S410 / IXUS 430 Digital Camera

My dell PC screen hangs with blank screen and cursor after installing the photofunstudio software supplied with my Lumix camera. I down loaded successfully pictures from the camera but most of the other icons on my desktop would not respond. I turned off the PC but when turning it on again, Windows XP professional starts to load and then the screen goes blank even in safe mode. What else can I try?


... Panasonic Lumix DMC-FZ7 Digital Camera

My Canon Ixus500 is stuck in picture mode only, it seems as though the selector switch is not working. This means that I cannot take panoramic, movies etc. I can only take still pictures


... Canon Digital Cameras

Hi, how to open the canon ixus i or i5, got two, one droped and is showing e18 the other does not show the pictures, because the top 3 position selector switch, to select video, picture or camera mode is brocken, because water went in. Thanks for your help


\015\012The E18 seems to be a significant flaw in an otherwise great camera. It is a flaw well know by users of Canon Powershot and Ixus cameras and is currently not acknowledged by Canon as a flaw ... Digital Cameras

When I press a button, like the mode button, it doesn't respond, how can I fix it?


Len's will not go in and come out, just starting problem from [email protected] ... Kodak EasyShare M1033 Digital Camera

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.


... Digital Cameras

Cannon Camera I can take pictures and can only view the last picture taken only. Also the function or menu button does not respond. Some time ago I was able to scroll forward and backward when looking at my pictures taken , the i could only scroll in one direction only. Now it does not scroll at all. I take beautiful pictures and can still download from my memory card. The selection mode button stop working so I can't take movie shots


Obviously a faulty button switch, your camera will need to be taken aprt by a proffessional repairer to solve this one, it will require a complete membrane swaitch assembly comprising all buttons, as they come in one unit. will possibly cost more tha ... Canon PowerShot S410 / IXUS 430 Digital Camera

"busy" Error Yet another Canon 20D question. I have been shooting both film and digital at weddings for the last two weeks. I have been very impressed with the 20D (I shot Nikon for 22 years). However, I have had my share of camera errors on the 20D. Lately, it shuts down in the middle of shooting and the LCD panel reads "busy." The busy error does not go away when turning off the camera. At first I assumed that the buffer was maxed, but I'm only shooting in single shot mode. Eventually, after m


Check your firmware version and update if necessary. Usually you get the "busy" message when your camera is writing to the card and it's possible the card isn't quite right - a format should fix it. Alternatately you might try a different CF card to ... Canon EOS-20D Digital Camera

Canon power shot a540 zoom function is stuck, zoomed all the way. also, in "play" mode, i can only see last image shot. the button to view previous or next pictures is not responding.


Serious internal damage to circuitry. Sell it as-is at an auction house somewhere to recover some money. ... Digital Cameras

Intermittent problem The camera works fine for awhile then the 4-way selector suddenly will not change the menu. Or it gets stuck on full flash or no flash. The selections may get mixed up. The review won't activate except for the last shot sometimes. Then if you leave the camera for a couple of days it seems to fix itself. Everything is fine then suddenly all the troubles come back. Although it gets messed up like this you can still take photos with it and you can use the other modes usually to


Sometimes, by changing the swithces of the control panel solves the problem ... Sony Cyber-Shot DSC-S85 Digital Camera

I have a Canon Camcorder MV750i purchased april 2004 It was not used for a few weeks when it was turned on it was able to playback but no image appeared on the screen when it was turned on. The various modes were displayed and in the middle of the screen were white marks indicating the corner of the image.


Here is a thread with solution to same problem.regards ... Digital Cameras

When I turn on my Canon PowerShot S2 IS camera and set it to shoot mode, the screen is black. A while back, I was able to get the screen to show by toggling with the camera and constantly turning it on and off. Now, however, it is completely black and will refuse to work. How do I fix this problem? Thank you.


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot S2 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0722 seconds