Having problems with your Kodak EasyShare DX7630 Digital Camera ?

Joystick not working. The cam turns on and prompts for date and time to be set. The only thing I can get it to do id to move the curser up and down. I can't slect anything to continue to set the date & time. I opened the cam and found that I can replace the button if I can find a replacement. Thank you.


Answers :

To reset the date connect Camera to PC. Open Easyshare Software, Go to Tools and Select SYNC. This will usually set the Camera Time/Date to the PC Time and Date. I have the same problem,(DX7630) cannot Move to the Right or use the Enter on Joy Stick so I am stuck with the Settings that were used last. I have contacted Kodak and there are No replacement Parts available. Just Great, I have a perfectly working Camera($500) and all accessories but it is basically useless due to a defective $1.00 Part. Last Kodak I will ever Buy.
Repair Help & Product Troubleshooting for Kodak EasyShare DX7630 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Joystick not working. The cam turns on and prompts for date and time to be set. The only thing I can get it to do id to move the curser up and down. I can't slect anything to continue to set the date & time. I opened the cam and found that I can replace the button if I can find a replacement. Thank you.


To reset the date connect Camera to PC. Open Easyshare Software, Go to Tools and Select SYNC. This will usually set the Camera Time/Date to the PC Time and Date. I have the same problem,(DX7630) cannot Move to the Right or use the Enter on Joy Stick ... Kodak EasyShare DX7630 Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

The date and time fuction on my G11 keeps resetting back to '0' when I turn it on resulting in me having to reset which in turns opens up another file to store the photo's in for that shoot also the photo numbers are repeated although the filing is set to continuous. Any ideas??????


The next time you enter the date and time info, press the set/ok button twice. ... Canon PowerShot G11 Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.


The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.


To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

Ixus 80 IS - Won't save date and time Everytime I turn my camera on it asks me to set the date and time, the manual says it has an inbuilt battery (I don't think it is changeable), is there anything I can do ?


After setting the date and time, press the set/ok/menu (whichever one you press at the end) button twice. ... Canon IXUS 80 IS Digital Camera

How do I get the date and time to show up on either printed pictures or on my downloads onto my home computer? I have set the date and time but it doesn't show up on anything, even my cameras own screen.


The date and time plus a lot more information is stored with each picture as "metadata". It can be retrieved in most photo editing programs. After downloading to your computer, if you just right-click on a picture file, the date and time will appear. ... Sony Cyber-shot DSC-N2 Digital Camera

What are the normal settings for night shots on oly C3030Z. Shall I use flash when I shot on nights? If I set the aperture on F2.8 and the shutter from 2 to 16 sec. I got a lot of pixels on the picture. I found out that if I have the shutter open for a very long time there are many pixels on the shot. I hope you can tell me,about the settings for night shots. I am new to this digital world,and this is my first digital camera. Is this camera not good to shot in the night?


There are ways to deal with this problem. As others have said, \015\012your camera appears to be normal. \015\012\015\012Consider using "dark frame subtraction" to successfully employ \015\012long shutter speeds. The technique involves capturing two ... Olympus Camedia C-3030 Zoom Digital Camera

KODAK LS753: when the camera is powered up the screen comes on to set date and time. The selector five way switch can move between set and cancel. When the switch is pressed straight in nothing happens. I was thinking there may be a hard reset somewhere on the camera to clear this glitch. Cycling the power does not change anything.


... Kodak EasyShare LS753 Digital Camera

Caamera just does not work - open shutter, batteries flicker etc. but screen blank. Use OK button and get all the settings, time date etc. bu cannot take photos? Help!! Have had camera for long time, great piece of kit - nthis happened out of the blue


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Olympus Camedia C-1 Zoom Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.


Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

Every time i open my casio exilim z1000 i have so set the time zone and te date


There is a small battery that keeps the date, time and other data. This battery needs to be changed, It might hat number 1616 or something like that. ... Casio EXILIM EX-Z1000 Digital Camera

When I open my Canon A520, a Date and Time setting always pops up, even when I set it before. I need an immediate answer please. Thank you.


You may need to take it in to the camera place to get the clock mem batery replaced cos it is out of date ... Canon PowerShot A520 Digital Camera

Date and Time always needs re-setting


There is a small button battery that maintain the 'clock' like all watch batteries they do go down.A replacement will mean taking the camera part and is not a very good idea - live with it or bin it ... Fuji FinePix F10 Digital Camera

Every time I switch on my Canon SD 1100 IS is asks me to set date and time. I set date and time and then it lets me take pictures. Next time I switch it on again it asks to set date and time. How could I get rid of this.


The camera's clock battery has worn out. Unfortunately, on most Canon SD series, this battery is not user serviceable. Recommend contacting Canon to see if they'll replace it, hopefully at a reasonable cost. 1-800-OK-CANON ... Canon PowerShot SD1000 Digital Camera

I have just bought the Kodak M381 camera and when I set the date and time and click ok, the time is set but does not display on the LCD screen at any point, so when I review my pictures there is no way of knowing when I took them. You can date the pictures retrospectively but that takes time and will be incredibly tedious and you soon forget. In the manual it says to select the date time stamp but I am unable to find it in my set up menu and I'm beginning to think this camera does not have this


I had the same problem. I think the camera does not have this feature, to bad it was a nice camera ... Digital Cameras

I have an agfa Photo waterproof compact 109uw and i am trying to change the date on it. I go 'menu' then 'setup' then down to 'date & time' then across and change the date setting 'day, month, year' then down to time (which changed fine for me) but when i go back to 'date & time" it reverts back to the original date. What am i supposed to press to set the date?! thanks helen


... Digital Cameras

CANON POWERSHOT A140 ALWAYS ASKS FOR DATE AND TIME SETTINGS WHEN STARTED


... Canon PowerShot A410 Digital Camera

The date and time will not stay set. I set the date time . take pictures and when I shut the camera off. the next time I turn it on the date and time is zeros again...


The world of compact digital cameras is fast and furious blink and you'll miss the new model. These pocket point and shooters are cram packed full of features that most people neglect to utilize. So it's uncommon for the problem you describe to occur ... Canon PowerShot A710 IS Digital Camera

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln


... Olympus Digital Cameras

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk


You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

The Coolpix L4 forget its date-time settings, and there is no way to set them. menu -> set up (ok)-> date (ok)-> date (ok)-> ... the result is "Time Zone" setup screen not the date.


Hi.\015\012\015\012\015\012Nikon cool pix settings are saved into an internal memory (20 MB EEPROM I think). \015\012\015\012\015\012The internal memory is kept alive by an internal rechargeable battery, that is r ... Nikon COOLPIX L4 Digital Camera

Card error after setting the date and time the camera displays Card error and wont let me access anything!


Generally, the best thing to do is to remove the battery for a few minutes and reinstall it.  This will kill any of the settings you've made.  Reprogram.  If that doesn't work, replace the battery or recharge it.  Also clean the c ... Fuji FinePix A201 Digital Camera

My still digital camera is Sony DSC W210. I am remove the external battery 3-4 days and open again aftre 3-4 days, display lost the set date and time. this problem is Internal battery or external battery.


That is the internal battery you cant replaced whit out opening the camera cassing and its very touchy you will need a tech to do so\012hope that will help you\012regarsd Allan ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3681 seconds