Having problems with your Kodak EasyShare LS443 Digital Camera ?

Suspect the LS443 kodak "on" button was activated while in my pocket, causing the lens deployment that probably misaligned the lens and caused the current problem. The lens no longer deploys correctly. It will deploy with mechanical help, but functions improperly in some cases. Still takes pictures with coaxing. Any fixes that don't involve taking it apart?


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare LS443 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Suspect the LS443 kodak "on" button was activated while in my pocket, causing the lens deployment that probably misaligned the lens and caused the current problem. The lens no longer deploys correctly. It will deploy with mechanical help, but functions improperly in some cases. Still takes pictures with coaxing. Any fixes that don't involve taking it apart?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EasyShare LS443 Digital Camera

I'm receiving an lens error message i hear noise but zoom won't function. Can't take pics! help please have taken battery out has happened before appreciate any help!


If the lens is detachable take it off and clean the contacts there could just be some dirt on them if not make sure the switch on the lense is set to A not Mhope this helps ... Nikon Coolpix 5700 Digital Camera

Nikon Coolpix Hi, im wondering if someone can help me so close to christmas. I last used my camera a week ago and it was fine. however when i went to use it last night the viewing screen just stayed black as though i was take a picture in the dark (yes the lens cover was open) i can take a picture but its just black. All the other functions are fine. My mum admitted to trying to show my sister some pictures on my camera but accidently went into image mode so she switched it off. However i hav


With the power off, hold the camera in your palm and smack the front of the camera on your leg or arm. You might have to smack it a few time t ... Nikon Coolpix S1 Digital Camera

Lens cover On my Canon Poershot SX100, the lens will not completely close/open. It's very slow to do either. There is a very small substance that I believe is keeping it from functioning properly. Can you help tell me where I can send it or take it to get checked out?


Hey pkg414,\015\012 You could bring the camera to a Geek Squad® precinct in a Best Buy™ store and they should be able to send it out for service, or you could contact the manufacturer and they should have a l ... Digital Cameras

PLEASE TURN CAMERA OFF AND THEN ON AGAIN message comes up repeatedly. What can I do about this? Someone suggested the zoom lens mechanism might be sticking. Spray with WD40?? Thank you for any help you can give. Camera very good otherwise, but this fault means one has to take a picture in a hurry, with no time to think about it. Clive Sutton


ITS WITH THE LENS AND WILL BE FIXED IN 24 HOURS . AND CAN BE DONE AT MATA ELECTRONICS, SP ROAD, BANGALORE 2. ... Panasonic Lumix DMC-TZ1 Digital Camera

Hi there, i just bought a 60D and trying all the functions it has. When im on any creative mode and the lens is set to AF, i cant seem to take a picture or even adjust the AF mode. i even couldnt open the menu itself etc.. i really need your help with this. I'm wondering if the unit I bought has a damage or i pressed something that make it wont work..


I don't think it is something you did wrong. What you can do is go into menu, and clear "All camera settings". This will set it back to default mode. Then try to see what does on af on lense. See if will work on mf mode as well. ... Cannon Digital Cameras

Hi. When I power up my Canon A75 to take a picture, the screen is purple, not black. Is this also a sensor problem? Also when the camera is turned on or off, the lens retraction or extension mechanism makes an odd noise in addition to the normal sound. As far as I know, this camera has not been dropped. Thanks for your help.


The purple screen is also an indication of sensor failure, However, the odd noise could any of a number of things from sand/gunk in the gear mechanism, a damaged tooth on a gear, etc... But still, recommend that you contact Canon to arrange the adv ... Canon PowerShot A75 Digital Camera

I turned on my cam to see the camera making everything look distorted on the screen and distorted when I actually take a picture. Every other function works fine (like the menu screens etc.) so it's not a screen problem so it might be a lens problem or something. Can somebody please tell me what's wrong? My camera is a Sony Cyber-Shot DSC-T3 if it helps. http://yfrog.com/0idsc03740sej Here's a picture of my laptop taken with this camera :( Thanks in advance


I'm afraid your camera is affected by the well known Sony CCD sensor problem - a large number of CCD chips manufactured by Sony between 2002 and 2004 were pron ... Sony Cyber-Shot DSC-T3 Digital Camera

Hi my Kodak CD93 turns on, will take pictures but the display stays black and the actual picture I took will be black too. You can hear the mechanisms all functioning but no actual picture results. The lens open too. This a camera that had been working fine for quite awhile.


... Kodak EasyShare CD93 Digital Camera

I started taking pics on my daughter's birthday function.. at the end of the function, my friend tried to take the camera from me but unforturnately it fell down. But we continued take pics and but after couple of minutes, It shows Lens error and the lens stucks and it doesnt go inside


Try repeatly turning on and off the unit by removing the battery each time the lens error screen pops up...that worked for me this summer when mine S210 got jammed with a sand particle. The next level is to get access to the front cover. That require ... Nikon Coolpix S210 Digital Camera

I have a sony cyber-shot DSC-W510 that are not functioning well just the start-up display and nothing more,,,and the lens open but no d isplay in the viewer,,any help or suggestions?


... Digital Cameras

Blurry Images i have recently purchased an Olympus C-700 Ultra Zoom, and i love it...but i need some help. when i'm taking pictures outside, at night, like...let's say at the moon, it's blurry. and when i take pictures, like at a concert, where flash is not allowed, it's also blurry. is there something i can do to change the shutter speed to where it will take crisper, cleaner pictures, or what needs to be done??? also, i just ordered a telephoto lens and a wide angle lens. what are these goo


If there's not enough light your camera can't invent any. Well, normally it can, which is what a flash does, but as you've said, no flash allowed.\015\012\015\012Your photos are blury because you're not mounting the camera on a tripod or you are usin ... Olympus Camedia C-700 Ultra Zoom Digital Camera

I was taking a picture of a moose at Yellowstone and changed lens. I forgot to turn off the camera before switching and the camera just shut down. It won't take a picture or focus the lens in AF mode? I can view my previous shots and downloaded them, but I can't take a picture!!!! And I am at Yellowstone and nowhere near a camera shop!!! PLEASE HELP!!!


Try reverting your EOS Rebel XS to its factory default settings:\015\012\015\012Under the 'wrench with three dots' icon, select 'Clear Settings' and press SET\015\012Select 'Clear all camera sett ... Canon EOS Rebel XSi Digital Camera

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford


If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

Lens stuck a went swimming with my olympus 770 in a swimming pool and whn i got out everything was fine with it.it was only until later i noticed that when i wanted to take a picture the screen turned blank and the lens wouldnt close.is it anything to do with chlorinated water? it shouldnt be right cause the olympus promotes its durability.i can still view pics but cant seem to get the lens to close and take a picture.pls help!


My wife an I purchased an Olympus Stylus 770 SW for our son as a High School graduation present 1 1/2 years ago. About a month ago he said that his camera quit working so I asked him to bring it home on Christmas break. It had the same symptoms as th ... Olympus Stylus 770 SW Digital Camera

When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!


The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera

I was taking pictures and i dropped it. then i slipped a thin paper through the lens. a small part of the paper got stuck in the lens. i cant take it out so i REALLY need HELP!


How about threading some dental floss to try to coax the paper out. ... Sony Cyber-Shot DSC-P72 Digital Camera

So my Panasonic DMC-TZ4 was dropped today while taking a picture, and now the lens only retracts half-way when turning off. I'm still able to take photos and such, but the lens will not retract all the way. Can anyone help me out?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed ... Panasonic DMC-TZ4 Digital Camera

Lens is stuck and wont move. on the screen it states "Turn the power off and on again" help pls? Was working just fine and then started with the lens not opening...I opened manuelly and now it wont't take pics...I can view them on disc BUT it just says "turn power on and off" on the screen. Help!!!


I agree that the camera needs to be sent back when this happens.  I have seen people suggest pulling on the lens (a bad idea) and smacking the camera / rapping it upon something (an even worse idea).  Not only will these options often fail ... Sony Cyber-shot DSC-W170 Digital Camera

My D80 suddenly stopped taking photos while I was in Auto mode. I noticed the flash stopped releasing. I've changed lenses, reset the camera's green buttons, switched out the card, reset the clock. It will occasionally take a photo, not necessarily in focus,and the flash will on occasion pop, but I can't figure out what the correct triggers are. Can anyone help? Lens is 18-135mm. Set Lens in in "A" and camera is in "AF"mode. Thanks much.


Hi, Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689. ... Nikon D80 Digital Camera with 18-135mm Lens

My kodak m763 quit working and i was wondering if i took it apart if i could fix it ...it may have gotten too damp in the rain, but the next day it turned on fine for viewing, then the lens would not extend out all the way out or go back in and it would turn itself off. We tried to help the lens come out, but wouldn't work and then tried to help it go back in and now its stuck and won't even try. Can i take it apart (with the right tools)...already tried everything and know i need a torx tool. d


Google the words...disassemble a digital camera. ... HP Photosmart R927 Digital Camera

The lens on my Canon digital camera will not close... i am unable to take a pciture and do not know the reason for this....when the camera is put on i am able to see my old pictures but when i click to take a new picture the screen is blank..i dont know what to do...please help...i have the canon power shot sd 500 camera and the problem that appears is the E18...... please help me


OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Lens stuck... Recently while taking photos with my camera, I went to power it off when I was finished. It would not power off, and the lens is stuck...it will not retract. I changed batteries and that did not help. Should I take it somewhere for repair, or has this happened to anyone else?


This happens since the lens section assembly is damages. and this can be corrected by doing a proper service to it. and hence i recommend u to take it to some service center for repair. ... Olympus SP-350 Digital Camera

My camera displays E18 on the lower left hand corner no other operation I turned the camera on the lens deployed and it intitiated OK but I can hear some activity such as motor etc. but after 10-20 sec it dipslays E18. I can view pictures, set up the camera but the moment I try to activate the caera function it goes into this routine. The lens now is stuck in the deployed position. I removed the batteries (Energizer Lithium), checked them they are good?


... Canon PowerShot S2 IS Digital Camera

One Powershot s60 flash does not work - all other functions ok -- lens assembly does make a bit of noise (sounds like gears) when extending compared to new or factory refurb unit Second Powershot s60 lcd screen will illuminate white but no image - otherwise all functions ok - will take pics and can extract pics from sd card - lens assembly makes same noise as above --


Hi\015\012\015\012On the first powershot you need to make sure the Auto Flash is not turned off (button top left on rear of camera) If it has been turned off a lightening strike symbol contained in a circle will show on screen and ... Canon PowerShot S60 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4439 seconds