Having problems with your Kodak EasyShare M1033 Digital Camera ?

The camera seems to run out of charge quickly and then takes forever to charge. Also, everytime you turn the camera on...it asks for the date, etc to be entered

Answers :

Replace your batteries. It sounds like it has developed a short charge, thus depleting the charge quickly.
Repair Help & Product Troubleshooting for Kodak EasyShare M1033 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The camera seems to run out of charge quickly and then takes forever to charge. Also, everytime you turn the camera on...it asks for the date, etc to be entered

Replace your batteries. It sounds like it has developed a short charge, thus depleting the charge quickly. ... Kodak EasyShare M1033 Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.

... Canon PowerShot S400 / IXUS 400 Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.

The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?

... Canon PowerShot SX100 IS Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.

Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

The date on my camera is reseting every time i turn it off and then back on again so it is asking me to enter the date every time I turn the camera on.

Next time you finish entering the information, press the set/ok (or whatever) button twice. ... Canon PowerShot SX110 IS Digital Camera

My Sony 7.2 Cybershot camera recently ran out of battery, so I charged it. Once it was done charging, I put the battery back in. The screen showed up asking me to insert the current date and time, so I did so. Next, the zoom lense went out and in, out and in, and out and in while the screen said "Access". Next, it told me to turn the camera off and on again. Nothing happens when I do so, and I've done it about 10 times to no avail. Is this a fixable problem?

... Sony Cybershot DSC-T200 Digital Camera

Have been given a FinePix A330 camera with no instructions - cords etc. and have it sort of working, but can't find out how to turn it off. Everytime I try, it takes a photo. Was given a 2gb. XD card, but it will not work - says it is not formatted. I now have a 16mg. card and it works. Have the date set, but need to be able to turn it off without waiting for it to turn itself off. Thank you, Nat Morgan

You can download the user manual from the following site: http://www.retrevo.com/support/FujiFilm-A330-Digital-Cameras-manual/id/200ci271/t/2/Look for instructions in the manual. ... Fuji FinePix A330 Digital Camera

I have casio exilim ex-z50. It worked fine the last time i used it. I went to use it yesterday and when i powered it on it asked for a date & time reset. after i reset the time it turned off and would not turn back on. After charging it it would turn on, but with no display. The display is completely black and when i take a picture and retrieve it from the camera the picture is also completely black. any suggestions. thanks

Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Casio Exilim EX-Z50 Digital Camera

Everytime I turn the camera on, it's asks to set the time/date. No matter how many times I HAVE set it, it always comes on again. So to use the camera I have to always go thru the "do you want to set the date stuff" first.

---- This is a problem many Coolpix S710 owners have had and many have had a defective internal battery (it keeps the time and date). To see if yours is defective, fully charge the main battery, put it in the camera and let it set with the power butt ... Nikon COOLPIX S710 Digital Camera

I have a casio exilim ex s770 and everytime i turn it i have to reset the language, country, time and date etc. how can it save them so when i turn it on it goes straight into camera mode?

... Casio EXILIM Card EX-S770 Digital Camera

Everytime we turn the camera on, we are directed to enter the date and time. This is annoying. We've had the camera for a little over year. It just started doing this about a month ago.

Sorry you are annoyed, have you considered relaxation therapy?It is likely that the Internal backup battery or supercap has failed however if you make sure your main batteries remain charged it should remember the info.Make/model?I ... Digital Cameras

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk

You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

I dropped my Casio EX-Z1000 on a tile floor. The camera turns on and the lens goes out and quickly retracts and camera shuts off. I can still view pictures on my card and can enter info on date, time, etc. Thanks for any help.

Unfortunitly when ever a digital camera is dropped it can cause the lens to come out of alignment this is what causes the error or problem. The len has several moving parts and can be replace most of the time it knocks the focus motor and zoom motor ... Casio EXILIM EX-Z1000 Digital Camera

My HP photosmart R967 worked great until it said it was out of battery and shutting down. Now I can't get it to charge, and it won't turn on. Strange thing, when it's on its' little dock charger, it turns on to a screen asking you to set the date and time, then won't set it. My husband thinks it needs a new battery ---- help! I need my camera!

... Digital Cameras

Ixus 80 IS - Won't save date and time Everytime I turn my camera on it asks me to set the date and time, the manual says it has an inbuilt battery (I don't think it is changeable), is there anything I can do ?

After setting the date and time, press the set/ok/menu (whichever one you press at the end) button twice. ... Canon IXUS 80 IS Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Every time i turn my camera on it asks for the date and time to be entered. Is there an internal battery that is dead?

Yes, the clock battery has died. This is very inexpensive and easily replaceable. Lift up the rubber flap on the left side of your camera. Pry open the little sliding door just under the flap. Pay attention to the little button battery inside and h ... Canon PowerShot A520 Digital Camera

Batteries are fully charged. I can turn my camera on and look through my pictures, go through all the menus, etc., but as soon as I hit the button to take a picture, the camera just shuts off. I can immediately turn the camera back on, but it makes a strange clicking sound before it turns on. My lens is stuck out because even if I turn the camera on and turn it right back off manually, the lens does not retract. The camera was purchased in winter of '08 and I've had no problems whatsoever with i

Possible that the shutter or the focus mechanism is faulty and will need to be opened. Only if you are competent must you attempt to remove the camera as the mechansim and circuit will be delicate which needs experience. Ohter wise the best option is ... Digital Cameras

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp

There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera

Everytime I turn the camera on the time and date

There are two batteries in the camera. One is the big one you charge and the other is a little coin type battery. This coin battery maintains your settings and when it goes your camera forgets things. Same setup on computers and a lot of other electr ... Canon PowerShot A520 Digital Camera

Camera Canon A710 IS started to ask set time date when turned on

When the camera is left without power for an extended period of time, the time and date settings are gone. You need to reset them and when you're finished, click the set/ok button twice. ... Canon PowerShot A710 IS Digital Camera

I just set the date stamp in the on position. Then, turned the camera off as I didn't need to take a picture. Now, when I turn it on, the lense comes out and then immediately goes back in flush and the camera is in the off position. The battery is fully charged and the camera even does this when I have it on the charger.

Hi,How long have you owned the camera? If under a year then I would recommend having it serviced by kodak under warranty. If it's over a year old you may want to try a new battery otherwise consider replacement.Thank you,Lee ... Kodak EasyShare V1003 Digital Camera

Panasonic DMC-FX33 has operated perfectly for 3 + years. Suddenly, when turning on, camera displays message "Please turn camera off and then on again". Lens cluster 'twitches' but does not extend out. Battery is fully charged; camera has not been dropped, jarred, etc.

Hello. If you suspect this is a lens problem ,I agree. I've had good results tapping the camera into the palm of my hand while its trying to open. Also try conecting your transfer cable to the camera and then press the power button, this keeps the vi ... Panasonic Lumix DMC-FX3 Digital Camera

No power I can't get my camera to turn on...yes I've charged, changed, etc. the battery...nothing happens. It's only 9 months old and I had just shot a birthday party the day before. Again I have changed the battery, charged the battery, etc. etc. and when I flip the switch on nothing happens....dead as a door nail!

Both your camera and the battery have a warranty, so I would call Canon and they may replace your battery out of goodwill even though it has been more than 30 days, if you provide your proof of purchase, this is always a possibility...to avoid having ... Canon EOS 400D / Rebel XTi Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5865 seconds