Having problems with your Kodak EasyShare M1033 Digital Camera ?

I have a Kodak Easyshare M1033. When my camera turns on it wants the date and time set and none of the buttons work!

Answers :

turn it on , Press Reset Buttonù
turn it off , still pressing The switch on button 10 seconds

It works for me
Repair Help & Product Troubleshooting for Kodak EasyShare M1033 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kodak Easyshare M1033. When my camera turns on it wants the date and time set and none of the buttons work!

HELLO SIR turn it on , Press Reset Buttonùturn it off , still pressing The switch on button 10 secondsIt works for me ... Kodak EasyShare M1033 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli

Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

I dropped my camera in water, the lense got moisture in it but was working right away. I had opened the inside of the camera to make sure nothing got wet. I set it out to dry. The lense is dry of moisture but the buttons wont work and the camera wants me to input the date. But, since the buttons won't work I can't, and now I can't take picutres.

Get a new camera - you will have other problem besides the obvious ones. Liquid will produce corrosive material after it drys and remain in the camera and will be difficult to remove later. ... Fuji FinePix F20 Digital Camera

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?

Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

I want the date on my photos but can't work out how to set the camera to put the date on the pictures, I have set the date and time but it does'nt show up on my photos when I transfer them to my PC

The camera won't deface your photos by printing a bunch of numbers on them, but it does store the date and time (and a lot more) with each photo file. You can choose to include some of it when you print the photo. Depending on the program you use, yo ... Kodak Easyshare C182 12MP Digital Camera

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln

... Olympus Digital Cameras

I have just bought the Kodak M381 camera and when I set the date and time and click ok, the time is set but does not display on the LCD screen at any point, so when I review my pictures there is no way of knowing when I took them. You can date the pictures retrospectively but that takes time and will be incredibly tedious and you soon forget. In the manual it says to select the date time stamp but I am unable to find it in my set up menu and I'm beginning to think this camera does not have this

I had the same problem. I think the camera does not have this feature, to bad it was a nice camera ... Digital Cameras

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.

The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

Date/Time stamp shows on pics fine but when I connect to pc with usb they all default to 1/1/2000. When I connect the usb cable into my camera the screen display reads "setup date/time usb connected" but at this point the setup buttons are frozen in both set up mode and playback mode. I want the pictures to transfer to the pc with the valid date that they were transferred on. Each time that I clear the internal memory or the memory card the camera starts naming the new pics with the same name as

... Moultrie GameSpy 4.0 Digital Camera Deluxe

Caamera just does not work - open shutter, batteries flicker etc. but screen blank. Use OK button and get all the settings, time date etc. bu cannot take photos? Help!! Have had camera for long time, great piece of kit - nthis happened out of the blue

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Olympus Camedia C-1 Zoom Digital Camera

Trying to set up my camera & goofed on the setting the date/time. I pressed the ok button before after I entered the year!! How do I get back to the screen to reenter the date & time info? I have a Kodak Easy Share C813. Thank you.

Hi - You can download the manual by clicking the link underlined in blue below: C813 ... Kodak Digital Cameras

I have a Nikon D80... a year old. The following functions/buttons stopped working for no apparent reason in the same time frame. - holding the delete and metering mode buttons together to format memory card. (however the buttons independently work fine) - holding the WB button (set to PRE) to set preset white balance. - when camera is on... turning the power switch to the "bulb" symbol to illuminate the control panel on top of camera not working. thank you for any help you can off

You have the latest firmware installed already and you said you updated again just to be sure.Certain button combinations that used to work don't and the buttons work independently.Sounds to me like the BIOS chip itself is cor ... Nikon D80 Digital Camera with 18-135mm Lens

Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.

I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk

You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

I have a kodak easyshare c195. when i set the time and date imprint although it shows on the camera when i upload the pictures to my computer the imprint is not there. I need this imprint for work.

How do I get the date printed on my photo?\015\012\015\012I'm sorry, but very likely you can't. The thing is, this was a useful\015\012feature on film photos, but the concept has been overtaken by\015\012technology, and is no longer relev ... Kodak Digital Cameras

I have a canon ixus 9515. It works perfectly apart from the time and date. It sets the time and date no problem and it does adjust the time whilst taking photos. However as soon as the camera is turned off the time and date resets itself to the original information put in

If the camera do not hold the settings ..it means the internal battery is faulty and need to be changed..(equivalent to a bios/cmos battery on computers....it is just a small size battery designed to power the memory for the settings when the batter ... Canon Digital Cameras

Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera

Joystick not working. The cam turns on and prompts for date and time to be set. The only thing I can get it to do id to move the curser up and down. I can't slect anything to continue to set the date & time. I opened the cam and found that I can replace the button if I can find a replacement. Thank you.

To reset the date connect Camera to PC. Open Easyshare Software, Go to Tools and Select SYNC. This will usually set the Camera Time/Date to the PC Time and Date. I have the same problem,(DX7630) cannot Move to the Right or use the Enter on Joy Stick ... Kodak EasyShare DX7630 Digital Camera

Sony Cyber-Shot DSC-P31 Digital Camera- the internal button battery will no longer hold a charge to remember the date settings and is apparently discharging the AA batteries by attempting recharge. I have to remove the AA batteries after using the camera each time and reset the date. Is there a way to access and replace this internal button battery?

Only with screwdriver and soldering tool :-( ... Sony Cyber-Shot DSC-P31 Digital Camera

Finepix J40 Serial no. 1SG25018 Purchase date 01-06-2011 Lucknow India, I want to tell you that I am very SAD to purchase this J40 camera. Because my camera focus is not working well. Sometimes zoom error is also occurring. I take the camera to service but they do nothing. When I take it to service centre • 1st time they said lens damage. • 2nd time they take camera said me it will only repair by company, after few days they said that they send the camera to company and it is now fully repai

You should have some bill or proof that you purchased the camera. Send a notice to the company representative in India that due to lack of proper service and defective camera, you are going to sue for damages. Ask him to reply within 14 days. The l ... Digital Cameras

When I turn on the camera the red light on top of the camera flashes all the time and none of the buttons work, then the camera just turns off. I have had the camera for about 3 years. What can I do. The camera model is svp xthinn 12vx. Thanks for your time and help. Ben

You'll be trying for another 3 years unfortunately.\015\012I have the same camera and have the same problem.\015\012Bought a new battery, new charger, new usb cord,\015\012downloaded all drivers, read all manuals, contacted\01 ... SVP DC-12V Digital Camera

Every picture i take is blurry. I've tried changing all the settings and going back to factory settings but nothing works. I've also tried all the different camera modes in all the proper times and none work properly. I took 25 pics at party with the party setting and night portrait and candle light setting and they all truned out extremely blurry. i dont know what to do except send it back

... Panasonic Lumix DMC-ZS3 Digital Camera

I have a Sanyo VPC-E760 digital camera that I bought used from a friend. Yesterday, I stupidly forgot to put the memory card back in the camera before I left for my son's first field trip. Now I have 12 pictures on the internal memory and cannot figure out how to get them onto my card-which is now back in the camera. I think I still have the old cords from my Kodak Easy Share camera that I lost, but I don't want to try them if that won't work. On my old Kodak, there was a setting where I could t

First ..choose a picture that ya know that is on the internal memory ..and see if it has options ...it usually has....there you will find option for move ..or transfer ..or so ...if it doesn't have ..you got to fins a suitable data cable ...and use t ... Sanyo VPC-E760 Digital Camera

Olympus SP-550 UZ won't focus properly most of the time. Focus point should be infinity since my subjects are seascapes, sunsets and clouds. I've tried all 3 AF focus modes but none work consistently. I can get it to focus sometimes if point the camera at the ocean first. I've even tried manual focus but it won't focus to infinity. This camera is practically new, has never been dropped. Is this a known problem with this camera? Is it a settings problem (I've reset the camera to factory settings

... Olympus SP-550 UZ Digital Camera

None of my buttons work

It sounds like the "button" circuit board is not working and will have to be replaced. ... Sony Cyber-shot DSC-W50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5755 seconds