Having problems with your Kodak EasyShare M1033 Digital Camera ?

Camera turns on but no functions are working.

Answers :


The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Repair Help & Product Troubleshooting for Kodak EasyShare M1033 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Canon 40D locks up when I click the shutter and the blue printer light next to the menu button is flashing. All the LCDs go blank and all functions stop working . Originally I was using a vertical grip and it still would not come on when I took the batteries out but after I detached the grip the camera did come back on . Now I'm not useing the grip and I still have take out the batteries and re-insert and turn back on camera to make function work again. Everything looks normal but the same th

... Canon EOS 40D Digital Camera


The secondary small mirror that guides the light from the lens to the sensors ( sensors sit at the bottom of the mirror box , underneeth the main mirror ) may be out of position. To check : take lens off and gently lift the main mirror half way up ( ... Canon Rebel XT / EOS 350D Digital Camera

When i take a picture it works fine..but then i try and take another picture and it appears the whole functions of the camera is locked up..cant do anything..however the screen still shows a image.. to take another picture i need to turn off and turn on the camera again and then it will only allow me to take one picture then i have to turn it off and on again.. please help with this problem...im sure its something simple but it is very frustrating thank you

Firstable go on to your camera settings try looking around for the problem if this does not work get it repaired hope you have warrenty if you don't itll be a little expensive so goodluck:) and please rate this solution...\015\012But if this do ... Digital Cameras

Arcsoft webcam companion 3 photo capture keeps turning itself on when I am trying to use monitor function. It has worked fine in the past (I use it everyday when I leave the house) until I unplugged the camera overnight. This also happens when I switch user accounts. The capture function just turns ifself on and takes pictures, even when I close the program. It will turn itself back on and do the same.

... Digital Cameras

Hi there, I have a nikon D50 camera and the inbuilt flash unit does not work any more.... it pops up in dark conditions bu tthen fails to fire. The camera will adjust the shutter speed as if the flash was turned off, and the flash doesn't work in any flash mode or any function mode. Could it be the bulb perhaps? I have reset the camera as well to no avail. please help! thanks :)

Hello, and welcome to Fixya.. This is a very common and known issue with the D50 camera by Nikon. Some buyers flash only works once and then quits. Its due to the speed of which the flash pops up, it literally breaks ... Digital Cameras

My panasonic lumix dmc-lz7 camera is not functioning. It turns on the zoom goes in and out and then displays the message "please turn camera off and on again" after doing this the zoom stays out. Turning it on and off again does not get it to work. Jessica

Battery might be weak and needs a replacement or there is improper shutting down. ... Panasonic Lumix DMC-LZ7 Digital Camera

My Fuji A210 has slowly stop functioning. It will display pictures but in the photo mode it will open the lens and then turn off. I found that if I apply an external voltage to the voltage jack on the outside of the camera and I increase the voltage from 3V to 3.6V this camera works great. Just as it did when new. It seems to me that something in the camera has increased in resistance to cause the internal logic to not function. [email protected]

Hello, it looks like you need a new battery. Check Walmart nearby for one, if possible, or check the manufacturer's website for the number and then go search www.pricegabber.com ... Digital Cameras

My camera seemed to be working but the screen is totally black. all functions seemed to be ok. the camera had fallen into sea water six months ago and when i turned it on now, it seemed to be working but not the screen what can i do for the screen?

Try drying it out on a radiator. but if its not working not a lot can be done other than take it to be repaired ... Sanyo VPC-S500 Digital Camera

I dropped my Cybershot DSC-W70 camera and now it doesn't work. I turned it on to take a picture and the lens extended out and the camera froze in the on position and none of the functions work.

Cameras are very difficult to fix i would recomend taking it to a repair shop, if it extended the lense it may be something simple like a gear getting stuck but if you try to fix it yourself you may make it worse with parts falling out.tr ... Sony Cyber-shot DSC-W70 Digital Camera

Without warning and for no apparent reason, when I switch the camera on all of the functions on the wheel switch work, but after a few seconds, the screen becomes snowy and then all white. I turn the camera off for a few minutes and then turn it on and go thru the same experience. Can that be fixed? If so, how?

Chances are that this is going to be a heat sensitive lcd driver chip, which, unfortunately, is a surface mount component, and not replaceable. The fix will be to replace it with a new main board.\015\012If I were in your shoes, I'd just get ... Olympus Stylus 710 Digital Camera

I have an Olympus E-10 and it will not turn on with battery power, however it turns on and all functions work properly on AC power, I really need help as this camera is in mint condition in appearance and function except for tih one problem...

... Olympus Camedia E-10 Digital Camera

BROKEN FLASH the flash on my samsung camera wont work, it will take a photo when i turn the flasg off but the red eye ( signalling the flas function is on ) just blinks but will not take the picture ?? helpppppppp !! read the manual with camera - not much use !! i can only take pictures during the day whilst the flash is turned off .

The chip set in your camera is damaged.you want to change it. ... Samsung NV10 Digital Camera

When I turn on the camera, it will AF once, then nothing. None of the menus will work, none of the functions work, cannot review pics. If I switch to manual and back to auto, it will AF once. I can take a picture in manual. As soon as I take a picture, I can use the menu or review pictures, but only once. Battery shows to be charged. I have taken it to 2 camera shops and they have no idea.

The problem is in the systems control board, "controls vital areas of the camera" from your description the operation is intermittent when switching from manual to auto, it indicates an hairline crack in the systems board, a tough problem to nail dow ... Sony Alpha DSLR-A100 Digital Camera

Canon rebel xsi dropped screen is black photos don't register on card camera functions seem to work...menu shows up buttons work lcd shows settings when camera is turned on but when I depress the shutter a screen comes up black with 1/60 10 100/1898 any suggestions? Thank you.

You may have to send that to a repair centre as dropping digital camera's often shake electronic parts out of place inside. you should try removing the digital card and reinstalling it to see if that helps at all. ... Canon EOS Rebel XSi Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again

I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

Just bought my used camera from Salvation Army. I know I shouldn't expect it to work, but it does in a way. I'd like to know why when I turn the camera on, the ready light flashes a few times (7, maybe), but does nothing else. I can't hear inside the camera to see if anything else is trying to function. I hooked the camera up to the computer, and nothing happened. Not sure if this is because I didn't install the CD needed.

Http://support.en.kodak.com/app/answers/detail/a_id/16430/session/L3RpbWUvMTI4OTMzNTc3OS9zaWQvR05OV ... Kodak EasyShare C360 Digital Camera

Hi there ...I have the Kodak V803 Digital Camera..a week ago i left the camera in a -10 cold temperature in the glove box in my car..the problem is, when i try to take a shot, after the flash the screen goes dark and the camera goes to a complete freeze, nothing functions anymore ..i can't even turn it off unless i take the battery out, and put it back again..the only thing i can use in the camera and don't give any problems, is recording part, it works fine . any help would be great :(

1. Try to fully recharge the batteries, and then, use them in camera.\015\012\015\0122. Keep your camera in warm environment (not too much close to hot surface) for 2-3 hours.\015\012\015\0123. Now, check your camera performan ... Kodak V803 Digital Camera

Fuji S9500 Finepix S9500 Camera now (Oct 2012) almost 6 years old. Once or twice has ahd a problem when turning on to take pics (balck screen only) and ahs then recovered when turned on again. But now has stayed with balck screen and onlya limited single blep when turning on. View function still working and settings available, but just black screen when trning on to take photos. Any ideas to fix it? How much migth ti cost to send in to Fuji Srevice? Is 6 years as much as I shoudl expect fr

... Fuji FinePix S9500 Zoom Digital Camera

Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .

Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera

I turned on my cam to see the camera making everything look distorted on the screen and distorted when I actually take a picture. Every other function works fine (like the menu screens etc.) so it's not a screen problem so it might be a lens problem or something. Can somebody please tell me what's wrong? My camera is a Sony Cyber-Shot DSC-T3 if it helps. http://yfrog.com/0idsc03740sej Here's a picture of my laptop taken with this camera :( Thanks in advance

I'm afraid your camera is affected by the well known Sony CCD sensor problem - a large number of CCD chips manufactured by Sony between 2002 and 2004 were pron ... Sony Cyber-Shot DSC-T3 Digital Camera

System error turn camera on green light comes on as per normal functions ok to that point then lens retracts like it is switching off green light comes on and flashes with system error.if you hold the camera to your ear when all this is going on you can hear noise from within the camera before it starts to retract and green light starts to flash with system error on screen.this happens on all functions.you can still look at pictures already taken this funtion works ok.just can,t take photos any

Hi\015\012the problem that causing this is:\015\012there is some pressure to the lens\015\012\015\012did it fell?\015\012probebly there is a fault in the lens \015\012\015\012sorry cant help\015\012\015\012good luck ... Panasonic Lumix DMC-LC43 Digital Camera

I have a sony SLR camera-model DSLR-A300k. The camera shake icon is flashing and the camera will not function. It is turned on and I can see the image on liveview on the LCD screen but cannot use the shutter or press any of the menu or play back buttons. Nothing works

I just took mine to the camera store and the woman at the counter swapped out my lens. The camera now works and the camera shake icon is gone. Try changing the lens, this worked for me and I had the same problem. ... Sony Alpha DSLR-A100 Digital Camera

Error message: Please turn camera off and then on again when camera is switched on. Battery is full ... it looks like everything is working well when camera is switched on. When switched off ... same message comes back up again .... Is there a reset function ??? Kind regards Matt

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Panasonic Lumix DMC-TZ1 Digital Camera

Turn on camera and screen lights up with an image that seems permanent. Can't get into the menue or anything else. The zoom and picture taking button work but the viewing screen will not change from what looks like an image burned into the viewing screen. I can hear all the normal functions but no change occurs on the screen when trying the differnt options for the camera. Please help. My camera is Power Shot SD400 Digital ElPH. Sincerely

Hi,Please replace the battery to solve this issue. ... Canon Digital Cameras

Heya guys im wondering if uu caould help me out, mmy FINEPIX A310 camera doesnt work even when i put new batteries into it can anyone help?, none of thee functions work or anything the lense doesnt even come out wheni slide to turn it on?

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Fuji FinePix A310 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3953 seconds