Having problems with your Kodak EASYSHARE M1063 Digital Camera ?

I do not want to use Kodak software to upload my MD1063 camera. I prefer my old program. Is it possible to use another program to upload photos from software other than Kodak to upload photos from my Kodak MD1063 camera.


Answers :

If you have a USB cable, Windows will do it for you.\015\012\015\012Lots of free ones out there; \015\012\015\012HP Photosmart.\015\012\015\012Picasa, etc.
I too don't like being forced to use the Kodak software as I have a preferred one. Since Kodak is so picky I use it but sometimes I use a cheap card reader I bought *as big as one of your fingers and the card goes into the side of it and it plugs right into USB) and I let Windows do its thing when it detects an "external drive" connected to a USB device on Windows XP.
\015\012
\015\012I used to put my card to my printer but since I upgraded my printer won't accept the bigger size so the card reader I bought works enough. I figure as long as you have Kodak set to not start on start up then any other program you want can be used .. but to get Windows to automatically use it would have to be done originally through the window that comes up and asks you how you would like to read the "external drive" (card from camera) and then tell Windows to remember what you want so it does that every time.
\015\012
\015\012I am not sure if this is the solution you want. Haven't verified it. Tell me if this helps you.
Repair Help & Product Troubleshooting for Kodak EASYSHARE M1063 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I do not want to use Kodak software to upload my MD1063 camera. I prefer my old program. Is it possible to use another program to upload photos from software other than Kodak to upload photos from my Kodak MD1063 camera.


If you have a USB cable, Windows will do it for you.\015\012\015\012Lots of free ones out there; \015\012\015\012HP Photosmart.\015\012\015\012Picasa, etc. ... Kodak EASYSHARE M1063 Digital Camera

I have had and used my fuji finepix A204 camera for 7 years with no problems. My son had a new (fuji finepix) camera for Xmas and he downloaded the software onto my PC. Before he left for home he uninsalled this software. I can not now get my photos to upload into any of the photo programs on my computer. Adobe, my pictures, microsoft picture it or fuji fine pics. All these programs will not highlight camera but only scanner


When your son uninstalled the program, the drivers for your camera went with it. You could start using a card reader to download your pics...it's much easier and foolproof. ... Digital Cameras

Why won't my camera let me upload my photos anymore? I've tried using a different cord, turning the camera on and off, and using a different program to upload them through. When I plug it in and turn it on normally it brings up a menu asking me how I want to upload them. Just the other day I went to plug it in and it didn't do anything. The computer recognizes it's there but it won't bring up the menu.


Blame Microsoft updates. Start using a card reader. ... Nikon D60 Digital Camera

Is there a way to download images from a ViviCam 25 cmaera without the Vivitar Experience Image Manager? I already have a photo managing program for my cameras. (I have over 6000 photos in it.) My 9 yr old grandson got this ViviCam for his bd. I am the only one with a computer that can take care of his camera. I was shocked when I loaded the software and it TOOK OVER MY COMPUTER!!!!! And what is with all the Facebook and other uploading software. I don't need any of that. I just want to be a


When you connect the camera, what happens? Does an icon appear on your desktop, does windows open a dialogue box and offer to download the pics, does a "removable drive" appear in "my computer"? Any of these methods should allow you to download to a ... Vivitar ViviCam 25 Digital Camera

How do I download my digital camera pictures from a Canon PowerShot A520 4.0 Mega Pixels to my HP Pavillion ze2000 hard drive so that I can upload them to your SnapFish software program used by Walgreens to edit their photos prior to printing. Walgreens told me that I can't download direcly from the camera thru the USB port, but that I have to download to the hard drive and then upload to SnapFish from my hard drive. Please help! [email protected] or (719) 392-2318


Hey there\015\012\015\012you can try downloading those pics to your computer by using the cameras software. or better yet, i can advise you to use another software which is really good for pics and vids from cameras. try to look for Picas ... Digital Cameras

I just got a second hand bought Kodak EasyShare C913 camera. After I got it I took only 7 pictures, after that it wouldn't let me take any others because it would say 'internal memory is full.' I just bought an 8gb memory card and I'm pretty sure I programed it so the camera reads that it's memory goes on the card and such. But it still says the memory is full and I'm not sure why. I don't know much on cameras I just want to use it for pictures and then to upload them onto my computer. Please he


The C913 is designed to work with SD cards. Your 8GB card is actually an SDHC card. While SDHC cards will fit into the slot, they will not work. You need to use SD cards 2GB and smaller. ... Digital Cameras

Kodak C813 This is my fifth one (yes I go through a LOT of cameras) and have not had anything but praise for this inexpensive alternative; love that it takes videos and photos BUT without any major changes to my hardware, suddenly it is not recognized and I cannot upload the photos I have taken over the past week. I use this as a business tool as I rescue and rehome domestic animals. This is really frustrating. I have uninstalled and reinstalled the Easy Share software twice now, have tried go


If the photos are saved on the sd card in the camera you should be able to copy them onto your pc by taking out the card and inserting it into the pc. If you have no card slopt use a card reader with a usb end. The photos will then open up with any p ... Kodak Easyshare C813 Digital Camera

Trying to move picutres from Olympus FE-190 to a new computer that has Mircosoft Vista for OS and the program gives the error: "The software is unable to find an Olympus digital camera connected to a USB port on your computer. Would you like to search again?" Camera is connected but the software seems unable to find it. I'm also able to use a different program to move pictures, but I want to use the Olympus program.


To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp ... Olympus Digital Cameras

I can't get pictures uploaded for my kodak easyshare C813. I don't use an sd card, i just use the internal memory. Recently, i uninstalled the software (for some or another reason) and was just using windows to put the pictures on my computer. I reinstalled the software, and now neither the software nor the computer are reading the camera when i plug it into the usb port. The camera goes dark, but the computer doesn't detect the camera.


When you plug-in the camera into the USB port, what is the message?Do you see any pop-up on the lower right hand side of the screen?Usually the pop-up is "Device is ready to use" or USB device unrecognized if the USB is not recogniz ... Kodak Easyshare C813 Digital Camera

I have a Kodak EasyShare V550 camera. I've had it for years and had no problems with it until recently. Now I am unable to upload photos to the computer. I've tried using Picasa, Roxio, and Windows to upload the photos, but all of them say that the memory card is empty ... but when the memory card is in the camera, I can see and review all of the photos. Could be that the camera and/or the memory card are over the hill, but I'm still hoping that I can get our vacation photos from it


Get a card reader and use it to download your pics from now on. ... Kodak EasyShare V550 Digital Camera

I am using a fujifilm 2GB M xd card. After a photo shoot, when I turned the camera on it said "card not initialized." What can I do? I really do not want to lose these photos, as they were from a shoot and are worth a lot to me. I tested another card out using recovery software and found that if I formatted it from the computer I could recover the photos, but if I formatted it from the camera I could not. I tried formatting my 2 GB disk with the precious photos from the computer, but it did noth


Hi,You shouldn't be formatting the card at all if your trying to retrieve pictures from it? What recovery programs have you tried on the card? What results have you gotten. In my experience some of the pictures should be recoverable depending o ... Fuji FinePix S6000fd Digital Camera

I am using a fujifilm 2GB M xd card. After a photo shoot, when I turned the camera on it said "card not initialized." What can I do? I really do not want to lose these photos, as they were from a shoot and are worth a lot to me. I tested another card out using recovery software and found that if I formatted it from the computer I could recover the photos, but if I formatted it from the camera I could not. I tried formatting my 2 GB disk with the precious photos from the computer, but it did noth


Formatting on the computer or in the camera erases the card. That is not what you want. Use a separate card reader to download the pics (if they still exist) to your computer. If that's successful, then format the card in the camera (not the computer ... Fuji FinePix S6000fd Digital Camera

I have a EOS 2D Mark II & I can't get all of the functions of the EOS Utility software to work. My computer (windows 7 (64 bit) recognizes the camera but when the utility software opens all but one of the options is not grayed out. I tried reinstalling the software but still have the same issue. Hence, I can't adjust any camera settings or view any photos. I want to use the teathered capture & remote triggering options available but can't. The manual suggest that I connect using the IEEE 1394


I don't see the problem with finding a Firewire cable as they are pretty standard, though I am having trouble finding references to a Canon model EOS 2D. Canon don't seem to have heard of it.Firewire is usually a feature of digital video ... Canon EOS-1D Mark II Digital Camera

I have a vivitar vivicam 10 digital camera. It is 640 by 480 pixels. it is an older model camera and I have lost or misplaced the software for the drivers and photo programs to instal it on my computer. ''Is there any software I can get to download the sotware program and driver downloads?'' I have pictures on it that I can't throw out or delete until I can upload them onto my pc. ''Can anybody help me with a website where I can find the drivers and software or any other research sites where I m


If you have WindowsXP, Vista or Windows 7, then your camera should be detected automatically, you just need to plug it in PC via USB cable. It should appear in MyComputer as new disk. ... Digital Cameras

I am having trouble uploading my pics from my camera. I have installed the software. I have used the USB cord to upload. I have inserted the memory card into my computer. I made sure my photos were on the memory card in the camera, and I still can't get the photos to upload. Any ideas on why this is going on? I have tried on my Mac and my PC.


Use a separate card reader to download your pictures to a folder you create on your desktop. ... Digital Cameras

Pentax S5i Hi I just bought a used Pentax Optio S5i camera.It only comes with the camera batterie and charger but,- no bundled cd software to program the camera to my pc.I bought this camera becuase my Optio s4i had got stolen.My question is,-will the S4i cd program that I have downloaded previously work with the S5i camera? I need to transfer pics to my computer and wanted to know if the S4i will be ok.Otherwise I have to find the cd program that came with the camera.PLease help Thanx


I have lost my cd for my optio s5i pentax camera and have a new laptop how can I get another cd or download software so I can transfer photos onto my laptop ... Pentax Optio S5i Digital Camera

I have a Kodak M1033 while uploading my photos on the Kodak software it was in the process of deleting pictures from camera and froze, now my pictures are deleted from the camera and did not succesfuly load them to the software, how can I get those pictures back?


It's no problem at all to get them back. Do not take any more pictures, and remove the card from the camera to lessen the chance of you overwriting some important pictures or videos. There are very many freeware software options available to help yo ... Kodak EasyShare M1033 - black Digital Camera

I have a kodak easyshare 2612 that has worked fine for two years. but recently, i used it to take videos at a film festival, and three videos will not upload. i use kodak easyshare software. the videos are still on my camera (without sound--that's something new also), but i get a message in the uploading to my computer that three videos are in an unrecognizable format. can anyone explain or suggest a fix? thanks.


... Kodak EasyShare One Digital Camera

I have a Kodak Easy Share M1063 Digital Camera and when I connect the camera to the USB port of my laptop computer, it no longer recognizes the new hardware device and I am unable to upload pictures. I used to be able to do this. I tried plugging the camera in to a home computer and this also did not work. When I plug the camera into these computers a green light goes on on the camera but the device is not recognized and I am unable to upload photos.


This happens cause the camera is seen as installed but the autoplay is set to do nothing ...either uninstall the driver and plug the camera to run it again ...or ...just go to the control panel /add new hardware ( be sure you plug the camera and powe ... Digital Cameras

When I view my card in the camera, I see all my photos. When I go to down load them using different programs, besides Kodak, it shows that some of the photo are "drawing failed". Is the problem with my camera or my memory card? Also be advised that when I first got the camera (about 7 months ago), I never had any problems. This type of problem has occurred within the past two months. That is why I am not sure if it's the camera or card.


It's much more likely to be the card than the camera, but it could be either.Try removing all of the files from the card, then reformatting it. Using an external card reader to reformat would be preferable, because it removes the camera ... Kodak Easyshare Z812-IS Digital Zoom Digital Camera

Drivers With my Fuji S700 camera, do I have to use the software photo program to download to my PC with Windows XP Home or can I just install a driver like I use to use on my last Olympus C-700, or will I damage the camera if I try to auto recognize the S700? Thanks for your time and answer in advance. J i'm ME


I'm having a similar problem, after having my camera repaired. Now, the computer (Windows XP) doesn't even recognize the camera. I'm now dowloading my photos via the memory card and it's working. ... Fuji FinePix S700 Digital Camera

My Kodak EasyShare C613 Used to upload pictures. When i open the program used for uploading pictures a box pops up say "Cannot get camera info". Any suggestions?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Kodak EasyShare C613 Digital Camera

How do I use the Panasonic Photo Fun program. My camera did not come with a how to manual. I need step by step. I have downloaded photos and now don't know what to do. I used Kodak Easyshare which was very simple. This is very different. Thanks for the help.


When you open the PhotoFun program, in the upper right-hand bar is "help"...click on it. ... Panasonic Digital Cameras

I can transfer the photos from my camera to the PC with the software that came with the camera. When I try to use their e-mail feature I get an error message that says "mail not sent". Yet a few weeks ago I was sending e-mails with pics with no problem, so I know it is not my support system. The program does not allow one to go into my own e-mail and attach pics, so I am stuck with their program which has stopped functioning. What can I do?


Hi , I suspect that your picture files are too big, to transfer to the provided e-mail function of your software. Try changing the resolution to the lowest size a try a few shots. And try to send again. You should be able to save your pictures in a s ... Fuji FinePix F480 Digital Camera

I have Exilim Casio Camera and I want to upload my pics to my PC, I used the USB cable and then it showed on the bottom right hand side of my pc that it finished installing the software for the camera, but it wouldn't upload, i couldn't find the CASIO in my PC


Try NOT connecting your camera to your computer.\012 \012 The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the compute ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5903 seconds