Having problems with your Kodak EASYSHARE M1063 Digital Camera ?

Just got a new camera & i cant set the date & time Its a M1063


Answers :

Menu: Cam. Settings: Date and Time.
\015\012
\015\012It also appears automaticly after resetting:
Reset cam: Take the batt out for longer than 15 sec and reinsert.
\015\012
\015\012Contact KODAK:
\015\012http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490
Repair Help & Product Troubleshooting for Kodak EASYSHARE M1063 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Just got a new camera & i cant set the date & time Its a M1063


Menu: Cam. Settings: Date and Time.\015\012\015\012It also appears automaticly after resetting: Reset cam: Take the batt out for longer than 15 sec and reinsert.\015\012\015\012Contact KODAK:\015\012 ... Kodak EASYSHARE M1063 Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?


The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

My camera shows that the date and time are set up but date does not print on picture when developed. it's a new camera and I just developed my first set of prints and there is no date on any of them. I checked the date set up and it is correct.


On digital cameras, the data is stored with the filename. Check the back of your prints to see if the dates were not printed there. Most companies do put at least the date information on the back of the prints as well as any other metadata stored w ... Kodak C195 Digital Camera

Just got my new camera and cannot figure out how to set the time and date--help---:-)


Press the MENU/OK button. Press cursor-left, then use cursor-up/down to select SET. Press cursor-right, then use cursor-up/down to select DATE/TIME. Use cursor-left/right to move between fields, cursor-up/down to change them.For more informat ... Fujifilm Finepix S2980

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.


To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

What are the normal settings for night shots on oly C3030Z. Shall I use flash when I shot on nights? If I set the aperture on F2.8 and the shutter from 2 to 16 sec. I got a lot of pixels on the picture. I found out that if I have the shutter open for a very long time there are many pixels on the shot. I hope you can tell me,about the settings for night shots. I am new to this digital world,and this is my first digital camera. Is this camera not good to shot in the night?


There are ways to deal with this problem. As others have said, \015\012your camera appears to be normal. \015\012\015\012Consider using "dark frame subtraction" to successfully employ \015\012long shutter speeds. The technique involves capturing two ... Olympus Camedia C-3030 Zoom Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.


Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

My cameram each time it starts makes me have to chooose where i live the time and the month again, i just bought the camera a few months ago brand new. i did all the settings and click ok but when i power up it does th whole start up setting again, why is this happening. i tried seting to default but still nothing. i took the battery out and put it back in. still. any help would be great to ge tit to keeop the date and not start the setup again. its a casio exilim 7.2 megapixel ex-z75


The same thing is happening to me with my ex-z75. i don't know what caused it and i'm also having trouble getting it to stay. ... Casio Digital Cameras

I've had the 5700 since 2003, which at the the time I paid $1200 for it. E-Bay is now selling for a bid of $85. At any rate, I cannot manipulate the menu to make any settings. I have a flashing update icon for date & time, but cannot set. Also, the zoom control is unresponsive. I have no idea where to get an estimate for a repair & let's face it, the repair would probably cost more then what I can purcahse a new digital SLR camera for with more features than what I paid for the 5700. Any correct


This link will guide you for free estimates of reparing the camera.if its worth reparing after getting the estimate get it repaired.if its costly you can go for new.for reparing estimates cost of camera ... Nikon Coolpix 5700 Digital Camera

Time settings i cant get the timestamp right, after i put in the new year,date and time following the manuel, it still shows the manufacturer setting 31.12. 2000 0.00 after i take a shot


... Oregon Scientific AT18 Digital Camera

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln


... Olympus Digital Cameras

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

I just recently bought a kodak zd710. When i received the product, i turned on the camera and i was immediately prompted to set the date and time. Once i finished, the batteries that the camera came with had quit on me. So i went out and bought new batteries, and when i went to turn the camera on again, the LCD screen did not light up. It has yet to come on when i turn the camera on. Is there any kind of troubleshooting i can try?


Battery usually come with very little charge when new.You must first charge the battery before use the camera. ... Kodak EasyShare ZD710 Digital Camera

I have just bought the Kodak M381 camera and when I set the date and time and click ok, the time is set but does not display on the LCD screen at any point, so when I review my pictures there is no way of knowing when I took them. You can date the pictures retrospectively but that takes time and will be incredibly tedious and you soon forget. In the manual it says to select the date time stamp but I am unable to find it in my set up menu and I'm beginning to think this camera does not have this


I had the same problem. I think the camera does not have this feature, to bad it was a nice camera ... Digital Cameras

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.


The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

Date Imprint I have just bought a new Olympus 795SW. I have set the date and time on the camera but it won't show the date that the photos were taken when they are downloaded onto the computer. Can someone help?


Throw the cam and buy a good one, this camera was bought by me to record the site photographs but with out a date imprint on them they are not even worth a tissue paper. ... Olympus Stylus 770 SW Digital Camera

Date/Time stamp shows on pics fine but when I connect to pc with usb they all default to 1/1/2000. When I connect the usb cable into my camera the screen display reads "setup date/time usb connected" but at this point the setup buttons are frozen in both set up mode and playback mode. I want the pictures to transfer to the pc with the valid date that they were transferred on. Each time that I clear the internal memory or the memory card the camera starts naming the new pics with the same name as


... Moultrie GameSpy 4.0 Digital Camera Deluxe

Fuji finepix a400 camera. When I power it on I get the 'date/time not set message'. I can set the date / time and all in well until it is turned off overnight. It has new batteries installed and I get this message even with an external power supply attached. This is most annoying.


I would suggest going to the fuji website to download the latest firmware driver and update the firmware on the camera. ... Digital Cameras

New camera - I need to set date and time. - Kodak EasyShare M530 Digital Camera


Press MENU, use left/right to select Setup, use up/down to select "Date&Time." Use left/right to move between fields, up/down to change the value. Press OK to accept. ... Kodak EasyShare M530 Digital Camera

Continuous shooting I'm new to this so bare with me. I just got my Nikon D60 and I want to shoot pictures in continuous mode. I set it on manual, go into the menu and change it to continuous. I rotate the dial so it changes the shutter speed but when I take pictures it's just a black screen. As a matter of fact any time I try to take a picture in M it's just black. I'm hoping that there is just a setting I need to change and there's not something wrong with my camera. Thanks.


Hey man. Im not sure how new you are but basically i think your problem is you need to decrease the shutter speed to around 1/200-1/250 of a second and increase the apeture to around f10/12 and see if that works. If your operating at a high shutter s ... Nikon D60 Digital Camera with 18-55mm lens

I have a new PowerShot A580 and am having problems: 1. Every time I turn on my camera it asks for me to set the date and time. I've done it and saved it, but the same message keeps recurring. What can I do?


Replace this small battery near memory card:P it is hidden under a piece of plastic. it works like a battery on a mainboard - keeps clock alive. ... Digital Cameras

My HP photosmart R967 worked great until it said it was out of battery and shutting down. Now I can't get it to charge, and it won't turn on. Strange thing, when it's on its' little dock charger, it turns on to a screen asking you to set the date and time, then won't set it. My husband thinks it needs a new battery ---- help! I need my camera!


... Digital Cameras

I switch on my camera today (finpix 6900) for the first time in a few months and with a new battery. When it comes on it is displaying 'set date & time' but doesnt let me do it or even cancel it as it normally does. Any idea?


The digital camera relies on the date and time and without setting it the camera will refuse to cooperate with anything you try to do with it. My concern is that once you set the date and time you will be fine until you shut the camera off again beca ... Fuji FinePix 6900 Zoom Digital Camera

How do I reset my panasonic lumix camera I need to reset camera to a new state. including getting rid of time and date settings?


... Canon PowerShot SD890 IS / IXUS 970 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5010 seconds