Having problems with your Kodak EASYSHARE M1063 Digital Camera ?

Camera problem What do you recommend I do, I was turning my camera on and the lense would close by itself and the power would shut off by itself. But now the lense stayed open and the camera still shuts off by itself.

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EASYSHARE M1063 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera problem What do you recommend I do, I was turning my camera on and the lense would close by itself and the power would shut off by itself. But now the lense stayed open and the camera still shuts off by itself.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EASYSHARE M1063 Digital Camera

Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt

... Canon Digital Cameras

The camera was dropped while the lens was open. The camera now only opens about half an inch out and then shuts on itself. When it shuts it powers down and will not stay on. I am assuming that the motor is the problem, if so is it fixable? How would I fix it? How much would that cost?

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare V1073 Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with

It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

When i power on the Camera F72 EXR it comes up with an Error message that says turn camera off and then turn back on, i do that an the same error keeps popping up, also when camera shuts off the lense fails to collaps and stays open in the off position

Whenever I've seen that before it's caused by the camera being dropped on its lens while the lens was out. It can be repaired though it's fairly expensive too, in my honest opinion you'd be better off getting a new camera. ... Digital Cameras

I have a Sony DSC-W170 and when I turn it on it powers fine and the lense opens, then shuts and opens a few times then stays open and tells me to 'turn the power off and on again'. I have done this and it doesn't solve the problem the same thing just happens again and again. I would'nt mind but it was fine then just stopped working, please help.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W170 Digital Camera

Camera will not take pics, it only let's me look at them. The lense stays open, it will not go back in, when I turn the camera on to take a pic, it shuts off.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

Lense will not open stays shut when turning on camera

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus FE-230 Digital Camera

Zoom Error Can you please help... For some reason my zoom is not working when I close the camera the lense (zoom) stays open and does not shut... It does not allow me to take pictures because it is in Zoom Error... Please help.

Hi thanks for using fixya!\015\012\015\012On this kind of error, I suggest that you bring your camera to a service center or to your retailer to further check the hardware problem of your camera.\015\012\015\012Regards! ... Fuji FinePix A500 Digital Camera

Is there any way I can get my camera back to normal! I turned it on and it said "focus error". When I shut it off to see if it would start over correctly it would not close the lens. I turned it on and the lens closed and then opened again and wouldn't focus. I turned it off and the lens won't shut. How weird is that? It obviously is capable of opening and closing but seems to be reversed and makes a funny noise when it can't shut at the right time. Can I wiggle or giggle something? I bo

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Digital Cameras

I have a Samsung TL220. I was taking pictures yesterday and all of a sudden the camera shut off but didn't retract the lense. I tried to turn it back on, and it would make a beep sound and then shut off again. I recharged the battery fully, then tried it again, the same thing happened. Is there a way to reset the camera, or to manually shut the lense? I need help please!!! Thanks!

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Samsung DualView TL220 Digital Camera

After taking some pictures I wanted to delete them. Instead of hitting the MENU button I hit the SET button and a red light came on and was flashing. I pushed on the OFF button to shut the camera off. It would not shut off.So to shut the camera off I opened the battery door and the camera shut off. I went to turn the camera on and will not come on. I changed batteries still will not turn on. WHAT DO I DO??...JERRY

Hello Jerry, First make 100% certain that the battery is charged, also that you dont have a bad connection.The S2 has a small cell battery for storing the date/time ect under the battery flap, try removing and re-inserting it, but ... Canon PowerShot S2 IS Digital Camera

My lense is stuck open despite turning my camera off. On turning my camera on I am told ''turn camera on off then on'' but the lense does not retract. I am able to view all photos on the memory card as well as turn the camera on and off, however at each point when the lense should retract it stays fixed out. Can this be fixed?

This is not a joke........Use a can of compressed air and blow around the lens while it is extended. Take a relatively firm approach with this problem slap the camera into your palm two or three times. Not lens down in this case, bu ... Sony Cyber-shot DSC-W120 Digital Camera

Camera problem My daughter just received a new HP635 camera for her birthday. At first the camera worked fine, but after a few minutes of use, the camera started flashing the welcome screen repeatedly and the zoom lense would move in and out over and over until we opened the battery storage compartment of the camera. Opening the battery compartment is the only way to turn the camera off. Everything on the camera becomes inoperable when this process starts which now is every time the camera is tu


When the camera is turned on with the power button the lens comes out and stays out but the camera immediately shuts off and the lens stays open. The only time the camera remains on is when the dial at the top is in the position to view the pictures already on the camera.

Please try Power Resetting the Camera. To Power Reset the Camera, First, please turn OFF the Camera.Then, remove the battery pack from the Camera.Then, press and hold the POWER button on the Camera for 30 seconds.Then, reinser ... Sony Digital Cameras

Lense error I get a lense error message. My lense is shut open on my Olympus 730 and the camera keeps shutting off

AWESOME. IT WORKED ... Olympus Camedia C-730 Digital Camera

My SD850is was dropped,there is a slight split on the bottom (looks like 2 screws are missing). When you turn the camera on, it says "lens error - restart camera" and then shuts off. It does show the opening picture on the LCD but then turns dark and shuts off. I've had the camera for about 2 yrs. Anything I can fix or is it worth the price of repair which would cost approx. how much?

From searching the internet, it sounds like the lens needs to be replaced and the cost of the repair would be about as much as buying a new camera.  thanks for responding.  now i have to go thru "what to buy" again....... ... Canon Digital Cameras

Lens opens when I turn the camera on, but then stays open and the camera shuts its self off. Tried all of the troubleshooting solutions. :(

If you tried all of the troubleshooting options on the website then I would contact customer support directly for repair instructions:\015\012\015\012http://www.vivitar.com/support ... Vivitar ViviCam 5386 Digital Camera

Yes in my new sx30 IS I opened it new put the battery in it and a chip, and turned it on, powered up ok, then the lense Loudly shakes and after a few seconds the LED readout says lense error, camera will shut down which it does. I restart it again and the same thing happens. Can you help or did I just get a defective camera?

More than likely it sounds like you have a defective camera. ... Canon PowerShot SX30 IS Digital Camera

Camera dying? It will powerup like normal. But when a CF card (tried different ones)is in the camera and you press the button to take a photo, the screen will either shut off clean or give a flash of scrambled image then shut off and freeze. The only way to reset is to remove the batteries. It is also draining the batteries in the few attempts to power it on. When no card is in there it will stay 'alive' for a bit longer but pressing any button on it and the lense will power down leaving

CCD problem is the likely cause here and once you have another one put in camera should work fine. ... Konica Minolta DiMAGE S414 Digital Camera

Dropped approx. 3 feet onto carpet. Camera was on and lense extended. It would power up, get into capture mode and flash "sensitivity" and a green light LLC. After about 50 on & Off's the camera turns on but doesn't come out of playback. I have to open the battery compartment and close it then when I turn it on it will go into capture mode. When I take a picture it is washed out with lots of little vertical lines. Did the lense get knocked out of whack? Can I reset this? Any help will be ap

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Pentax Optio M20 Digital Camera

I have a Kodak EasyShare CX7300 camera...usually when my battery goes down, I put it on the dock and recharge. I live in Mississippi and my dock is in Texas at my daughter's house. I purchased new Kodak batteries that were recommended for my camera. I have put them in, however, my camera green operating light will not stay on, goes to red. Then the camera shuts off. I was told by someone who works in the camera section of a store that I could just put in 2 AA batteries and that would work, t

Hi,Digital camera requires specific current from batteries to function and I would recommend Duracell AA battery for occasional use of camera.If you buy ... Kodak EasyShare CX7300 Digital Camera

I dropped my camera on the floor while i was taking a picture , the camera shut off , but the lens stayed popped out . i tried to turn the camera on again , but i would only show me the home screen , which says "Kodak Easy Share System , Share" then the camera freexes up , and it say in the top left corner , "lens error : 22" i've tried smacking it against things , i've tried smacking it on my hands , i've tried pulling out the lens , NOTHING WORKS. Please Please Please Please Please Please Plea

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak EasyShare CD33 Digital Camera

Humidity Issues Hi! This past week I went on a cruise to Cozumel and Progresso, Mexico. At both locations, once at the pier and once on the ship, the outer and inner lense would fog over and stay like that for 5-15 minutes. The only way I could clear it would be to place the camera in front of a fan (which would "dry" it faster) or fan it with a piece of paper (which took forever - don't really know if this even helped). I have never had this problem before and have owned 3 different Canon c

Canon has recalls from time to time for things like this. The best way to find out is to get a hold of their tech support at:\015\012\015\012http://www.usa.canon.com ... Canon PowerShot SX100 IS Digital Camera

I dropped the camera while it was on & now the lense stays open and when i press on the camera makes noise & says restart camera & that there is an erorr

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Canon PowerShot A480 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4452 seconds