Having problems with your Kodak EasyShare M1093 IS Digital Camera ?

Camera lens are sticking out and won't go back in. When I turn it on it is zoomed in, while I have not yet had the chance to zoom on my own. It make a funny noise, i tried messing with the lens to see if that was the case, but it wasn't. I need help please


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Kodak EasyShare M1093 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera lens are sticking out and won't go back in. When I turn it on it is zoomed in, while I have not yet had the chance to zoom on my own. It make a funny noise, i tried messing with the lens to see if that was the case, but it wasn't. I need help please


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare M1093 IS Digital Camera

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford


If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

Help!!! my casio exilim z-70 makes funny grinding noises when its turned on and the pictures taken are blurry. i have tried messing with the settings but nothing seems to help.


Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. Yo ... Casio EXILIM ZOOM EX-Z60 Digital Camera

I let my brother use my camera and he dropped it while it was on and the lens was out. I try to turn it on and get the lens to go back in but it wont. And every time I turn it on the light turns on but it makes a beeping noise three times. Please help?


Your brother owes you a new camera. ... Digital Cameras

Broken Lense My VPC-E760 Sanyo camera is a little over 4 mo. old. It was dropped about the 2 mo. i had it. Then lense popped back ito place, but it makes a funny noise when turning on and off. (or going in and out when previewing pics). Last night, it was working fine then turned off, said 'lense error 25' 'lense error 22' and 'lense error 12'. I don't know why! I tried to find out what it meant, but i couldn't SOMEONE HELP!!! lens will not go in. camera reads lens error 12 and 25


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min. ... Sanyo VPC-E760 Digital Camera

The lens on my Olympus m760 camera is stuck in its out position. Even When i turn my camera off or take the battery out, the lens stays fully zoomed out and makes a funny noise like its tyring to retract. Please help.


This is probably caused due to a fall or so.. try to technically have a 360 look at the sides of the lens were at one instant u will notice a slight droop.. now u have to carefully push the lens in carefully with **** like motion for which a click no ... Olympus Digital Cameras

Camera will turn on. It will show stored pics, but the screen is black when trying to take pic (tho it has info on it- like how many pics I have left on memory card). If I take a pic, then it's all black. Sometimes it makes funny noises and often it will say "camera has detected an error and is shutting down. Please restart." And then the number 32. Just bought camera less than two weeks ago. Now out of country. Trying to take pics of trip. Help!


Hi there,Try to reset the camera to its Default Settings.Please let me know how this goes. ... Canon PowerShot A3100 IS Digital Camera

Last time I tried to turn on my camera (Samsung SL502) the lens came out but the screen didn't come on. I hit the power button again and nothing happened, now the lens is extended and won't go back in...pressing the power button does nothing but the camera makes a funny sound. Please help. Camera is 6 months old.


Sounds like the lens mechanism is stuck - mine does the same thing after my 2 year old dropped it on the cement. Looking for a replacement lens now, but not having much luck. Read the previous posts for other solutions. Good luck! ... Samsung SL502 Digital Camera

Camera lens The lens itself is making a strange noise and it is having trouble adjusting itself when the camera turns on. When I attempt to turn the camera on all you are able to see is a black screen and there is also a buzzing noise which I assume is the lense trying to adjust itself. The lens is trying to push itself outwards but it is getting stuck. I'm not exactly sure what is wrong with it but I assume that once Iam able to fix the lens I will be able to use the camera normally again.


Broken gears is common on the sony cameras. They have very brittle gears and have more torque then the gears can handle. They just break teeth off. There was probobly some small debris (sand,dust) stuck in one of the teeth and it got to that point an ... Sony Cyber-Shot DSC-P72 Digital Camera

Omgggg help me please im gonna die for this kodak camra ok well i was in borders book store and my friend wanted to see my red kodak easyshare m853 and as i was handing it too her we dropped it when the lens was extended and for the first 2 min after dropping it it worked fine i jus picked it up and went on than like 5 min later it said lens error 1,22,1,0,0 or something like that help other people said force the lens back in but when i try i can see the screen going to pop open and i dont wanna


Please don't die. Unfortunantly this fault needs to be repaired.\015\012\015\012Because the camera has been dropped KODAK might determine this fault as Out of Warranty\015\012\015\012An Out of Warranty repair for this model fo ... Kodak EasyShare M853 Digital Camera

My cameras lens wont come out, its stuck. when i turn it on.. it makes noises, & tries to come out, but wont extend.after like 10 seconds of it making noises, it saays lens error. i have a NIKON COOLPIX S202. please get back to me, i have a trip in a couple days & need to know if my camera will be in use. thank you!


Hi, ... Nikon COOLPIX L3 Digital Camera

When I turn on my camera, it says 'Lens error. Please restart.' and then the lens makes a funny noise and turns off


HiWhat you are seeing is a generic stuck lens error message and obviously you didn't cause it as you said it was already happening before you tried to clean the camera and get it working again.\015\012Your lens needs to be cle ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Canon SD900 My lens is stuck out, and everytime i try and turn on my camera it makes a grinding noise and then reads on the screen, "lens error restart camera" How do i restart the camera? And how do i make the lens not stick out if the camera is off? Thanks for your help!! C


First off, see if Canon can help you. If not, the following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012 ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

Was taking pics last night at Disney World, went to put camera away & the lens would not go back in. Tried putting fresh batteries in and still nothing. Today tried again & camera comes on saying Lens Error! It's making a noise like it's trying to go in but nothing. Also nothing else working on camera either. Any suggestions please.


Get a can of compressed air, attach the included straw, aim it at the crevice where the body and lens housing meet. Now give it two or three good blasts and power the camera at the same time to see if the lens retracts, if not! take the ... Nikon COOLPIX L18 Digital Camera

My C1030 digital camera, which I bought at the end of december 2010, is having a major problem. The lens won't close anymore and when i try to turn it on, it makes a strange noise and it gives a black screen and turns off and still the lens won't get in, it stays out. I tried new batteries, but that's not the problem. Please advise.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... BenQ DC C1030 Eco Digital Camera

Lens stuck I have had this problem twice with this camera, the first time I exchanged the camera for a new one. The second time the batteries went dead and the lens was out. It won't turn on and makes this beeping noise when I do try to turn it on. I tried changing out the batteries, but nothing seems to help.


Here is how I fixed this problem. I grasped the lens around the base (larger part) like you would if you were going take off a beer bottle cap. Very gently while sliding my thumb and index finger around the lens, I rocked it back and fort ... Polaroid I533P Digital Camera

Recently, i've been having an issue with my Kodak Easyshare M883 camera Every time i press the power button, the camera turns on, makes a weird noise, zooms in and out to refocus, makes the noise again, then completely shuts off. Its done this every time i turn it on for about a month now. I am completely able to review my pictures, let alone take any. I've tried plugging it into the computer, and even charging it overnight. please help me.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare M883 Digital Camera

Hello Expert, My Olympus Myu 760 got stuck on its lens. Please help me how to fix it. When I try to turn it on, I can hear the sound like retracting the lens but the lens still doesn't move and on the LCD appear the message like this D: 5 f 08 5 e02 what does it mean ? and how to make it normal again. thank you very much in advance !


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras

Is there any way I can get my camera back to normal! I turned it on and it said "focus error". When I shut it off to see if it would start over correctly it would not close the lens. I turned it on and the lens closed and then opened again and wouldn't focus. I turned it off and the lens won't shut. How weird is that? It obviously is capable of opening and closing but seems to be reversed and makes a funny noise when it can't shut at the right time. Can I wiggle or giggle something? I bo


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Digital Cameras

When turning on my camera the lens tries to extend and there is a buzzing noise. After 3 attempts the lens closes and there is an error message of Lens error on the screen - please help


Hello and welcome to FixyaThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a pr ... Nikon Coolpix S210 Digital Camera

Mkay. my camera for some reason is acting up it is not working when i plug the usb in to the computer and my camera usually it makes a noise showing that it works and then soon after that its pops up with the program and i can upload my photos amediatly but its not now and i dont know why i have been doing everthing i know to fix it. i tried downloading a differnt program i tried puting the usb in a differnet slot i tried a lot. PLEASE HELP!!


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Kodak EasyShare C613 Digital Camera

When the lens is closed...my camera still works just fine. But when I try to open the lens...it comes 1/2 out, then goes back in. It makes a funny noise like it's having trouble when the lens comes out the little bit it does. What can i do? Can it be fixed easily? Olympus d-550


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus Camedia D-550 Zoom Digital Camera

I have a 28x80 canon lens l series that was droped and now the auto focus or manuel dont work. ive tried to have it fixed but it is said that canon does not make ;parts for this lense enymore could you please help me get my favorite lens fixed thanks mr.p


... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3628 seconds