Having problems with your Kodak EasyShare M380 Digital Camera ?

Lens will not go back into the camera when turned off.


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare M380 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras

Batteries are fully charged. I can turn my camera on and look through my pictures, go through all the menus, etc., but as soon as I hit the button to take a picture, the camera just shuts off. I can immediately turn the camera back on, but it makes a strange clicking sound before it turns on. My lens is stuck out because even if I turn the camera on and turn it right back off manually, the lens does not retract. The camera was purchased in winter of '08 and I've had no problems whatsoever with i


Possible that the shutter or the focus mechanism is faulty and will need to be opened. Only if you are competent must you attempt to remove the camera as the mechansim and circuit will be delicate which needs experience. Ohter wise the best option is ... Digital Cameras

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

My digital camera say lens error:21 how do i repiar the lens? sanyo vpc-e760 My SANYO VPC-S650 says lens error:507 everytime I turn the camera on. The lens has not returned back to normal position, and everytime I turn the camera it cuts back off. I hav tried replacing the batteries so the batteries are not dead


The lens has a servo fault. This can be either the lens motor, the helicoil in the lens is jamming, or the servo drive electronics has a fault. \015\012\015\012You will have to send the camera for service if you want to fix this. I doubt ... Sony Cyber-shot DSC-W55 Digital Camera

Lens Error! We have a Nikon Coolpix S6. When attempting to turn on, the camera buzzes. Afterward, the screen shows what the lens is pointing at, but then it goes white and the words, "Lens Error" appears. I can't find the manual to pinpoint the problem. Also, when the camera is turned off, the lens cover stays open, and only goes back when the bateries are taken out and put back in. Please help quickly, this is a school camera, and it is needed for a large scale progect. (yearbook). We h


I know this is really late, but I've been having the same problem with the S6 on and off for the whole year, and I suspected a loose part.\015\012\015\012For a whole week, I couldn't turn on my camera, and the lens cap doesn't close until five minute ... Nikon COOLPIX S6 Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat


It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error I dropped my digital camera just recently back in October and all of a sudden when I turn the camera off the lens is still out when it's suppose to be in... I really don't know how that hap


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Fuji FinePix A345 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len


Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Camera problem Hi. I have a Pentax Optio M20 Digital Camera. When I hit the on/off button, the camera turns on, the lens zooms out for a second and then back in, then it shows the "Pentax Optio M" load screen, then it shows "Auto Picture" in the center and a green dot in the bottom left with the words "EV Compensation" next to the dot. While it's showing this last screen, it beeps 3 times right before the lens zooms out again then back in just before the camera turns off. I have changed the batt


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The back screen shows Pentax Optio screen for a second, then then the screen displays the word Auto Picture in the center of the screen and Green Mode at the bottom and at the same time it cycles the lens out and in. And for a brief moment in the back ground of the screen you can see the picture st


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

I have the same problem with my Lumix DMC-TZ3 lens error states "Turn off camera and then turn back on" Though my lens tries to adjust then stops. The power stays on with the error message. Til I turn it off .The lens still does not retract. Now when I turn it back on the lens will do the same thing. I don't think its the lens. How would someone repair or replace firmware. Can it be done over the net?


Of course it's the lens. Try these:\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE most ... Panasonic Lumix DMC-TZ3 Digital Camera

When I power up the camera the lens opens and immediately retracts and the camera shuts off. I've attempted to push every button while turning on the camera to no avail. I also held onto the lens when it opened. Though the lens remained extended, the camera powered off. When I turned it back on the lens retracted and the camera powered off.


Have you made sure that the batteries are LiIon and fully charged? I had a similar problem with a Kodak Easyshare camera that required the higher voltage LiIon battery pack rather than alkaline AAs which will fit in there but is not exactly right. ... Kodak EASYSHARE M763 Digital Camera

Lens Error I fell while holding my camera. The lens was open at the time and when I got up I turned the camera off. I then turned it back on to check it and the lens opened and immediately closed with the "lens error" on the screen. I can turn it off and on and the lens will always open but closes as soon as it has opened with the lens error on the screen. The shutter opens but closes also, like the lens. Can this be fixed? It was a gift so I don't have the bill of sale but I still have the orig


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX L4 Digital Camera

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help


You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

When i turn the camera on the lens pops out and retracts a few times then I get a message to turn the camera off and back on. I do that and the lens retracts and pops back out and will not go back in.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ3 Digital Camera

I took my camera to the beach, took a picture and put it back in my bag. I then took the camera back out to take another picture the lens extended but then it went back in again it went to go back out but stopped and a loud beeping noise started and a message saying lens error restart camera. I don't know how to restart the camera and if that means turning it of then on it still doesn't work. What can I do now?


If your camera went into "standby" mode, the lens retracted and you may have thought it was off. You put it into the bag and slight pressure on a button reactivated it and the lens tried to come out but may have been prevented by something in the bag ... Canon PowerShot A480 Digital Camera

My camera turns on by itself even with the slide in front in the closed position. The screen then shows the warning that the lens cover is closed. When I open and reclose the lens cover in 10 or so seconds the camera turns itself back on and repeats with the lens cover closed warning. The only way for me to turn the camera off at this point is to remove the battery. Help!


Most likely some dirt, dust, or other particle is jamming the lens opening gears. You can try to spray some compressed air into the lens assembly, hopefully dislodging whatever is obstructing the lens cover. If this doesn't work, the camera wil ... Sony Cyber-shot DSC-T77 Digital Camera

Lens Stuck Sony Cybershot DSC--P73 My wife dropped this camera and now the lens is stuck. When I turn on, the screen just stays black with the word Access and then instructs me to turn off camera, and turn back on. I am able to pull the lens out manualy, but it just stays stuck there also. Please help. this has been a great camera. Thanks


Same problem guys!!! LENS HAD GOT STUCK - ABOUT ONE THIRD OUT after a knock. After lots of playing, and tapping and batteries in and out tried the whole twisting and pulling thing whilst turning off and on.\015\012\015\012After a few minu ... Sony Cyber-shot DSC-W50 Digital Camera

Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma


YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera

My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

My Camera (Nikon Coolpix S3000) broke because I dropped it while the lens was extended out... and the lens hit the ground. Now when I try to straighten out the lens, I turn the camera on and off, and when it turns off, the lens doesn't go in all the way, and when I turn it on, the lens goes extends out, but immediatley goes back in again!! (but not all the way) I am lost, and extremley disappointed. Please help.


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will ne ... Nikon Coolpix S3000 Digital Camera

Help!!! i dropped my Nikong Coolpix L11 camera on the pavement. The lens got dented in, so naturally i popped it back to its normal place i turned it on and it worked for about 30 seconds and then popped but with the image that said "Lens Error". So i turned it off then turned it back on and it did the same thing. It did that for about 10 minutes and now as soon as i turned it on it says "Lens Error". I cant figure out how to fix it, i've tried slightly tapping it against my desk, i've tried hol


Hellothere are tiny plastic gears inside and may have chipped or a small piece of sand got in causing the lens to jamb. "very fragile"one solution is to ask a camera repair shop how much a lens mechanism would be to replace. ( ... Nikon Coolpix L11 Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks.


Try the procedures in this tip. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Kodak C875 digital camera - when turned on sometimes the lens moves out about 1/4 inch, camera clicks and lens moves back in and camera turns off. Also there is some clicking when the camera is turned off. How serious is this?


Remove the batteries and clean the battery contacts inside the camera\015\012with a soft cloth (a heavy buildup on the contacts may require cleaning\015\012with a fine wire brush, steel wool, or sandpaper). Remove any residue\015\012that the cleanin ... Kodak EasyShare C875 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4181 seconds