Having problems with your Kodak EasyShare M530 Digital Camera ?

Someone dropped my camera bending the lenses and it worked after i charged it ,but it has been turning off if i hold down the zoom button ,use the flash too much,and now it won't turn on at all? help

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare M530 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Someone dropped my camera bending the lenses and it worked after i charged it ,but it has been turning off if i hold down the zoom button ,use the flash too much,and now it won't turn on at all? help

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EasyShare M530 Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.

... Panasonic Lumix DMC-FZ28 Digital Camera

I have put fully charged batteries in my camera and when i tried to turn it on the lens zoomed out and then turned off. I've continually tried to turn it on and sometimes it flashes green by the on/off button and other times it flashes red by the flash logo and most of them time it does nothing at all. help please!

Your\015\012problem may be due to corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the bat ... Nikon COOLPIX L10 Digital Camera

Lens trouble My lens will not come out entirely on my camera, for when I push the button to turn it on, the lens tries to completaly come out but then quickly retracts back halfway and remains stuck about halfway open. The screen is black and the light flashes red everytime I turn on the camera, along with a noise of something stuck. I have tried using that little button that someone told me was the reset button, along with plugging it in, and charging it. None of this has helped me with fixing

Appears to be a repair issue... lens track may be off ... Olympus FE-280 Digital Camera

I have the tz7 and have 2 problems with this. when turning on or off the lens cover takes ages to open or close sometimes you have to help it and use your finger to open it!the other is when operating the zoom button it does not feel smooth but clicking as if there was resistance with the button resulting in the zoom jumping in and out with no smoothness! any ideas?

It is normal these things. You can switch it off and then charge it fully and then you can see whether the problems is still there. If this does not help then you have to go to someone who repairs camera.Do not forget to vote for me it is very impo ... Panasonic Lumix DMC-ZS3 Digital Camera

My batteries died in my pink i733 and when it shut down the "zoom lense" did not recede. i put fresh batteries in it but all that happens is that the green light flashes. it wont come on or turn off. the lense will not recede and none of the buttons work. the screen doesnt come on or anything. HELP!!!!! My i733 has the same problem,It died on me while I was taking pictures and now the lens is out the green light flashes and it wont turn on, new aa in it aren't helpin I get a very quick blee

This can sometimes be fixed if you remove the batteries over night and allow the camera to sit and discharge it should correct this problem. hope this helps. ... Polaroid i733LP Digital Camera

Zoom Error Hi....when I turn My Camera on the camera won't zoom out the lens and the display reads "zoom Error" ....I can't even put up the flash with the button....Please Help!!!

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Fuji FinePix S3000 Digital Camera

PANASONIC dmcfz8 Problem: When I turn on the camera and remove the lens cap I get a message on the lens that says "remove lens cap & press button". It seems like the zoom is stuck. We were using the camera for a inside night graduation & was at a distance from the subject that we wanted to shoot. After a few zoom shots we shut the camera off and when we tried to take more pictures the above problem started. Please Help!

Try to help the lens go out by pulling it very very lightly... ... Panasonic Lumix DMC-FZ20 Digital Camera

When i try to use to the zoom button it does not zoom and instead it says to turn my power on and off again. Every other part of the camera works. please help me!

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Sony W230 Digital Camera

My CoolPix L10 camera display will not turn on - it sometimes will work as a video recorder, but I cannot get the display to come one. A red light just above the menu button will flash and then go off and the on light flashes. The camera is only about a year old and used to work great. Please help!

Change the battery..........................................sodeep ... Nikon COOLPIX L10 Digital Camera

Connected Nikon L11 to Vista laptop. Picture Project software NOT installed. Turned on camera in hope Adobe Bridge could be used to transfer photos to laptop. Nothing happened and suddenly something flashed on the camera's screen and now the On/Off button will not work so I cannot turn off the camera. Help. What do I do?

Get a card reader. Use it from now on to transfer your pictures to the computer. Remove the card and battery from the camera...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Nikon Coolpix L11 Digital Camera

My batteries died in my pink i733 and when it shut down the "zoom lense" did not recede. i put fresh batteries in it but all that happens is that the green light flashes. it wont come on or turn off. the lense will not recede and none of the buttons work. the screen doesnt come on or anything. HELP!!!!!

The dead batteries affected on the camera ... Digital Cameras

Used Vivitar 70-200 zoom on my K200 Pentax. Nothing but aggravation since. Right now the 18-55 lens it came with is on but shutter button is stuck in down position and my flash wont pop up using the manual "up" button. When I look thru lens and push button, flashing "F" is the only thing there. Removed lens and button would move enough to "click" but would not come up. Put lens back on and nothing! Newbie in the extreme and ready to go back to my MX !!

The issue here is the manual mechinsm is in defect, Your going ot hate me but there is not much I can do over email but to tell you a local camera shop can take care fo this for cheap. Whats going on is the mechism is jammed most of these are spring ... Pentax K200D Digital Camera with 18-55mm lens

Plz help my camera was working fine then after a few days i turned it on and it wounldn't work then i replaced the batteries. when i turn it on the red light flashes then the green light flashes and then it stops and nothing happens after that. i tried pushing all of the buttons but nothing happens plz help me !

Remove the SD Card and the batteries. Wait for half an hour and then insert two new batteries. Do not put the SD card in as yet. (Waiting for half an hour or more allows the camera to reset itself).Now try switching on and good luck. ... Kodak EasyShare C653 Digital Camera

Flash I have a sony cybershot DSC-W50. Everything has been working fine until one day it stopped flashing. I have tried pressing the flash options button, but nothing happens. However, whenever I turn the camera on E:91:01 and a little squiggly arrow flash. Please help me! i already try to reinitialize my camera but nothing happen. the flash still doesn't work. please help me. tnx

The flash circuit has gone out the squilling noise is the flash compasitor popped and the acid inside is burning. ... Sony Cyber-shot DSC-S700 Digital Camera

My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.

... Canon PowerShot SX110 IS Digital Camera

My problem is with the vivicam 3188 camera. I cant get the flash to come on. The manual only says it will noy come on if the batteries are needing to be replaced. Well my problem is I bought this camera on line and recieved it about 5 hrs ago and it came with name brand ones. The flash did work earlier. The camera has the flash off icon on. But by the manual the button I need to press to turn the flash on doesnt turn it on. Please help

Remove the batteries from your camera and the press the power button for few seconds say 20 sec , then release it.. put the batteries back to ur cam n try... tis is how u reset ur camera.... try tis ... Vivitar Digital Cameras

This Sucks! My camera is new, I went to use it...actually for something I saw that was hillariious...and I turned it on, the lens came out...it was zoomed all the way, and I could'nt take the pic nor could I adjust the zoom. Then I got this hateful message to turn camera off then on again, which I did. Now the lens does not return apon turning the power off, but does retract and come back out when I turn it on...and then the same scenario! Help Please!!!!!!!

I think this is just a hardware malfunction(some mech. switch) because, i have a lz7 and when i deliberately open the battery case with the camera power on it obviously switches off and then when u close the battery case either with the power on or o ... Panasonic Lumix DMC-LZ7 Digital Camera

Broken Camera Well, I dropped my camera, and tada, it is messed up. It turns on, it takes pictures, but the only button that works is the on/off button and the button to take the pictures. http://www.walmart.com/catalog/product.do?product_id=5634183 is the camera, I've had it for 2 years, so the warranty is up. The setting I had it to before had no flash, so now I can't take pictures with flash. If I could get any help, that would be great!

One of the cables connecting to the other buttons probably came out of its socket. It needs to be opened up and checked 1st. Sometimes maybe there is a crack which needs to mended to restore the reset of the button. ... Kodak EasyShare One Digital Camera

AF problem Last week I took some pics that needed the flash turned off. I did that and took the pics with no problem. I turned the flash setting back to "auto" afterwards. (this may not be related to the current problem but does seem too much of a coincidence). Next time I went to use the camera, I got an AF(red dot) and a red hand on the screen. It would take one picture and then would be frozen (no zoom, no picture taking, but the screen would stay on). If I turn it back on I can then ta

Jangles,\015\012\015\012I am having the exact same problem. Have you found a fix ? ... Nikon Coolpix 5600 Digital Camera

Camera stays on if I don't use zoom...I zoom slow or fast it still turns off n on on me. It has just turned off as well. Please help thanks Kev 10000 shots

Lens unit is bad,replace the lens unit or get it serviced. ... Canon PowerShot S3 IS Digital Camera

When ever I try to use the zoom button I get a message saying system error (zoom) I have also gotten a message that says Please turn off camera and turn on again... What is going on with my camera and what needs to happen to get it fixed!

When you first switch on the camera the lens will motor forward?\015\012\015\012If it does so then either the zoom control button is faulty or the control pcb \015\012\015\012If the lens does not move on first switch on then i ... Panasonic Lumix DMC-FZ28 Digital Camera

When I try to zoom in on my camera (a Sanyo VPC-E1090), it says "Lens Error: 0x2119" It used to say something similar to this when I turned it on, but I turned it off and on many times until it corrected it. But I don't know how to correct this problem or if it can be corrected. For background information, the camera is only a couple weeks old, and it has been mainly used at a camp and ranch where it is quite dusty. Thanks for the help.

... Sanyo Digital Cameras

Digital camera I have a digital camera (Pentax Optio A10) and just recently the camera stop working. Every time I turn on the power button, the lens zoom out and a few seconds later the camera will turn off, and the lens will come back in. I bought a new battery thinking it help, but it still does the same thing. The camera is not even 2 years old yet and I paid over $300 for it. HELP?!?!

I had almost similar problems with my A10 from day one. The camera shuts down before the battery is depleted, most of the time while I was operating the zoomlens. I bought a new battery, but that didn't solve it. Later I decided to take it apart as a ... Pentax Optio A10 Digital Camera

My Collpix L3 reads Lens error when I try to use the zoom. However, when I use this button to zoom on a pix that I have already taken it works...Can you help me?

When will I receive an answer????? ... Nikon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3228 seconds