Having problems with your Kodak EasyShare M530 Digital Camera ?

When it's dark or early in the morning, do i use the flasher to get a clear photo.

Answers :

Repair Help & Product Troubleshooting for Kodak EasyShare M530 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When it's dark or early in the morning, do i use the flasher to get a clear photo.

YES ... Kodak EasyShare M530 Digital Camera

Hi im using Canon ixus 95 IS. How do i use it to take photos in the dark room or at night? Can i use it to take clear photos in the dark room?

Simple check - point any old Infra-red remote control at the camera. If you see a blue flash from the transmitting end of the remote wand, chances are you may be able to equip and use an infra-red illumination lamp. If there is a tripod mounting hole ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

Dark photo I take a picture with the flash on and it is very dark. I haven't used the camera for about a month and a half. when I used it last, it was working fine. now it takes photos normally (with the flash), but the pictures are barely visible. How do I get it back to taking the normal, brightly lit pictures?

... Sony Cyber-Shot DSC-T11 Digital Camera

I have a canon rebel eos 500 t1i . I have problems getting clear photos , and photos that are not grainy . Either they are blurry , or full of grain . If I use an iso of 800 indoors , it's grainy . Is it okay to use a 400 , and if i do , how will that affect the outcome of my photos ?

You can use any ISO setting you want. After all, it's a digital camera...you can experiment to find the settings you like and it doesn't cost a cent. ... Canon EOS 500D / Digital Rebel T1i Digital Camera

I am using D90 with programe Auto ISO 400, in clear day sun light my picture get very dark, but on same settings in door with auto flash I get very clear result why?

Additionally some remarks: I would recommend the ISO 200for daylight, as the D90 doesn't have a native 100 ISO (LOW 1). For a beginner enabling auto ISO is the better choice: this way the camera adapts to different conditions automatically, and you ... Nikon D90 Digital Camera with 18-105mm lens

Display problem Canon powershot Sd110 The amera is clicking the photos but we cannot see it on the screen. the screen just showa a horizontal line and doesn't give any picture or anything.It used to click photos very clearly and everything and I can see the previous photos as well which are already saved in it. It is not giving any view while clicking the photos and the screen remains dark in colour with the horizontal slim light going up and dowm.It also gives the sound on clicking the photo b

Contact Canon - dont say where purchased- could save a complication- but yes CCD problem- should be replaced FOC - a hefty discount on a new one ... Canon PowerShot SD110 / IXUS IIs Digital Camera

I am using a sony DSC-T1, when in the camera mode the screen is dark except for the numbers and dots that appear for camera operations. I can not take a picture of anything. I can review photos, when I do take a picture with the screen dark and I review I just get darkness.

CCD imager chip is defective in your Sony DSC-T1 camera that is why you see no image in lcd screen.Replace ccd imager chip to fix the camera problem. Local camera repair shop will help you to replace bad part if you have no experience of electr ... Sony Cyber-Shot DSC-T1 Digital Camera

I was taking photos over the weekend with my Olympus E-500 and the eyepiece viewfinder got darker than usual. I was using a promaster 5750DX flash. Even without the flash, the eyepiece viewfinder has remained dark. Also, I reset all settings to the default settings and now when the built in flash pops up, there are a series of three "beeps" and the camera tries to focus. I cannot get it to take a photo however. I also pushed the button for the sensor cleaning today. Could this have screwed u

Hi,\015\012Before doing sensor cleaning did you keep camera on bulb setting. This allows the cameras mirror to stay up until you choose to close it\015\012When you press the shutter release button it will lock the mirror up out of the way ... Digital Cameras

I have a canon digital ixus 55 however on auto mode the shots are coming out blury even with flash and i can only seem to get a clear photo on digital mode however this does not allow me to use flash so when i want to take photos in darker lights it proves a problem!! help if u can! also a few times the camera would shut down only displaying a small number in the corner of the screen E18 but i don't no what this means.

The E18 error happens on Canon cameras usually when the lens is jammed when extending. The error is so (in)famous that it has it own website where you can find help and advice on how to fix it. You can view the site by clicking the link underli ... Digital Cameras

Canon PowerShot A495 - Brand new. Used it once and took 40 photos. It then told me to change the batteries which I did. From then on it keeps saying "change the batteries" I've used alkalines and also rechargeable NiMH, These are either new or fully recharged batteries and still I get the same message. I have also cleaned the terminals inside the camera and even those on the batteries themselves. No change. This is clearly not a battery problem. This is a camera problem and its seems I am not th

... Canon PowerShot A430 Digital Camera

My Sony Cyber-shot DSC-H7has bought up an issue where it brings up an 'usb connecting' screen for one or two seconds occasionally when using the camera. This does not effect the photo taking quality at all, it just means I have to wait for the screen to clear. Do I have to get a tech. to fix it, or can it be done in camera. 2 years old and out of warranty. Very annoying. Any thoughts. Thanks, Ian.

Hi ian. this is not a normal camera operation. usb connecting screen should only appear during camera to computer connection. so if your using the camera and this happens intermittently it would indicate that there is a mulfunction inside the camera ... Sony Cyber-shot DSC-H7 Digital Camera

I have a Caonon 40D. I thought I was having a lens problem at first. However after using 2 other lenses I have found out it is my Camera. No matter how clear and crisp the image is in the view finder. After the photo is taken and loaded into PS4. The image is blurry and unsharp. I have reset all camera settings to factory with Canon. And I am still getting the same results. Any help would be appreciated. Thank you in advance.

It is probably due to dust on the sensor, or sensor alignment not properly done. In both cases you have to take the camera to a Canon dealer for servicing. ... Canon EOS 40D Digital Camera

I often get dark areas in the upper corners of my Sony A350 photos taken with a flash. I don't use a lens hood.


I used to get very clear and crisp photo's, but now they are all grainy. Why??

Unfortunately due to fixya's answering system, I cannot see what previous experts have suggested. Have you tried turning off the image stabilizer? Also are you using the Digital zoom when your taking these pictures as that effects it as well. Try se ... Olympus SP-510 UZ Digital Camera

I have one red pixel shines up in the dark back ground with 1/15s speed and 400 ISO settings. I tried to use manual clear method to map it out but does not work. I tried 3-4 times from 30s to 2 minutes. What else I can do to get rid of it? Thanks.

Do you get the same effect with different speeds and/or iso settings? If so, theres nothing you can do to get rid of a dead pixel other than to have the factory refurbish it. If not..sorry...can't help you further. ... Canon EOS 40D Digital Camera

Purchased the camera of Kodak Z8612IS, after setting of AA  turned out 7 photos. All was normal. In the morning I include a camera is a dark blue screen and error of "Error EO3" and a white bulb blinks near a round switch (PASM and other). What is a problem in???? Help... On a site there is nothing clearly on this issue did not find

A repair is needed.\015\012\015\012Contact KODAK:\015\012http://www.kodak.com/eknec/PageQue ... Kodak Easyshare Z8612 IS Digital Camera

I have a cannon power shot s1 is. When i look through the view finder or on the lcd monitor i get a very distorted image it is very dark like looking at somthing in the early morning fog.

Press display (DISP.) button to turn the display on. This button is\015\012located on the rear of the camera and toggles the camera's LCD display.\015\012The button is usually printed with <DISP.> on the button or above the button depend ... Digital Cameras

Blurred edges My Canon Rebel XTi took awesome photos when I first bought it. I let a family member use it and I think the settings must have been changed or something, because now all my photos are blurred on the edges, esp. on the left side of the photo. I always use AF and the blurring occurs no matter what ISO I use. Also, my action shots used to be crisp and clear with no blurring whatsoever. Now they are blurred, doesn't matter if it's night or daylight and no matter what ISO. Is there

Blurring occurs not depending on ISO, i think the lens is the problem. try to clean the lens glass carefully, is there some grease stick on the lens? if not it might be dislocated one of the lens structure.have you try another lens? ... Canon EOS 400D / Rebel XTi Digital Camera

I have a Canon Power Shot S300 Digital Elph and use the Canon Digital Camera Solution Disc (Ver. 4.0). Part of this software is ZoomBrowser EX 2.6 which I use to download the photos from my camera to my computer. Recently I started getting the error message "There is not enough free memory to perform the operation". I have removed all of the photos from all folders and have also uninstalled and reinstalled all of the Solution Disc software but still get the above error message. This will not all

Memory errors are either free space on the C drive, Virtual Memory on C drive and almost always not related to your RAM.To check for Virtual Memory size in your PC, Right click My computer, click on the Advanced Tab, then click on the Per ... Digital Cameras

I can see a set of pictures from a recent trip on my Fuji Finepix J10, but when I go to transfer them to my MacBook Pro using iPhoto off the memory card, I get a "corrupted files" message and when I use the cable to download off the camera's memory it says "no photos". How can I get these photos onto my laptop? Other pictures I've taken before and since have transferred..

Use a separate card reader to download to a folder you create on your desktop. From there, you can import into iphoto. ... Fuji FinePix J10 Digital Camera

Clear photo when taking photos15 feet or morei can't seem to get clear photos come out blured . is there a way to get better focus

Is it day or night? If the latter, a good tripod will do wonders! How are you using the focus? Auto or manual? What is the shutter speed you are using? Please provide more details! :) ... Fuji FinePix S5200 / S5600 Digital Camera

When i move my canon Sx110 is then i get a noise from in lance and when i take photo, my photo will not clear it buried its not showing clear photo, its dot dot on my photo.

The lens and possible the sensor may be dirty, but the question is not very clear so i cannot be sure what you are asking. ... Canon PowerShot SX110 IS Digital Camera

LCD screen I am using my sisters camera over the next two weeks and cant figure out how to get the lcd screen to work while i am taking a photo. It is fine to review the photo and takes photos fine but i can see what i am taking the photo of unless i look through the eye piece. I cant get hold of her for the next two weeks and i dont have the manual can anyone help? Is there a button or setting i have to put it on?

Unfortunately it is not possible to preview the picture on the camera's LCD screen before you take it.The 300D is an SLR camera. What this means is that as light comes in through the lens it is deflected by a mirror (which sits in front o ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

With camera on the AUTO setting, I can't seem to take clear, focused photos. Nearly all of them are out of focus or blurry. Does not matter if it is in the day time or at night. Also, when using the ZOOM function the photos are mostly out of focus. What can I try to take clear photos again? Thank you.

Try resetting your camera back to factory defaults. Press the MENU button, select the middle tools tab and scroll down to RESET ALL. Press SET, select OK and press SET. Hope this helps. ... Canon PowerShot S5 IS Digital Camera

My D50 nikon with 18-55 nikon lens takes a beautiful photos in day ligth. but in dark place in auto mode when use automaticaly the pop up flash the photos are very dark (looks like the flash ligth does not effect when I cover the flash glass the photos are looks better.

Use manual shutter speed is 80 n apptur is 5.6 ok... ... Nikon D50 Digital Camera with 18-55mm Lens
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3570 seconds