Having problems with your Kodak EasyShare M550 Digital Camera ?

When I plug in my camera, it starts to load "Kodak

Answers :

\015\012The camera is loading a application that uses JAVA script and thus there might be a issue with the program itself.
\015\012Kodak comes with Easy share software witch allows you to share your photos on sites like Face book, ect.
\015\012What you could do at this point if you want a FAST solution is:
\015\0121. Click on START then MY COMPUTER
\015\0122. The camera should be there under STORAGE DEVICES
\015\0123. Click on the camera or storage device then click on the folder witch will open up a couple folders for video and pictures.
\015\0124. Right mouse click and drag over all the files then click MOVE/ or copy
\015\0125. Select your hard drive C:/ then select USERS then my pictures
\015\0126. right click in the my pictures folder then click paste!
\015\012This will safe your pictures to your local hard drive if you use the MOVE command it will delete the photos off the camera and move it to that folder.
\015\012The other option is to reinstall the Kodak software that came with the camera.
\015\012If you have any questions let me know!
Repair Help & Product Troubleshooting for Kodak EasyShare M550 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I plug in my camera, it starts to load "Kodak

Hello,\015\012\015\012The camera is loading a application that uses JAVA script and thus there might be a issue with the program itself.\015\012\015\012Kodak comes with Easy share software witch allows you to share your photos ... Kodak EasyShare M550 Digital Camera

I am attempting to transfer photos from my C713, but I can't power the camera on when it is plugged into the USB. I have changed the batteries and the camera will power on when the USB is disconnected from computer; once the USB is plugged into the computer, the camera will not go on. The Kodak Easy Share software is loaded on the PC. Help!

Easy shares are set up so they won't respond when plugged in to usb. When you turn the camera on and then run the easyshare program and lastly connect the usb cable, then the pictures and video will transfer to the computer. \015\012You can als ... Kodak EasyShare C713 Digital Camera

I'm trying to hook up my Kodak v1003 camera to my computer, loaded with Windows XP. When I plug it into the USB, it doesn't recognize that I've even plugged it in. What do I do?

Pros avoid this very common problem by using a separate card reader similar to the one pictured here.\012 ... Kodak EasyShare V1003 Digital Camera

My new c813 software is corrupt right out of the box. I plug in my camera and it isn;t reconized. It can't find it under wizard. I need the driver to make the camers load to my compter. My old kodak used to load to windows expl this one won't do anything

Go to the manfactures web site the Drives and all the software should be there. ... Kodak Easyshare C813 Digital Camera

Kodak z1012 camera will not hook up to windows xp, software loaded fine plug usb in turn camera on xp does not see it

Make sure the cam is switched on when connecting.\015\012\015\012Try dif. USB plug.\015\012Try dif. cable.\015\012\015\012Use a card reader.\015\012\015\012Contact KODAK:\015\012 ... Kodak EasyShare C913 Digital Camera

I put the software disc into my computer,and it started to download.not all the items were downloaded,and when I plugged in the usb cable from the computer to the camera and turned on the camera the message new hardware found did not appear.I uninstalled the three items to try and install them over again,and now when I put the disc in my computer it will not load at all.what can I do?

Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Polaroid i733LP Digital Camera

When i plug in my flip video camera. flip share opens ,but wont load and stays at that starting screen forever. and i can not turn it exit it.

... Pure Digital Flip Mino Digital Camera

RAW images i have just got this camera and have just started university with it i am only allowed to shoot in RAW format and i have to edit them in photoshop does anybody know if there is any possible way or programme for me to load up and edit my RAW format images as wen i open them in photoshop cs2 it comes up with a grey screen and there is no plug-in available for my model any suggestions?

Photoshop does support the RAW file type. But you have to install a plugin for it to work. The installation is pretty simple.go to http://www.adobe.com/downloads/it is in there. ... Panasonic Lumix DMC-FZ18K Digital Camera

Been tranferring pictures from kodak easyshare c653 for along time w/o problems but now when i plug the usb port into my windows vista laptop (which i've used together w/o problems, the camera does not show up on the device screen and will not load photos into laptop. could it be time for a new usb cord? or clean out port hole..? thank you.

Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak EasyShare C653 Digital Camera

Kodak DX6490 Hi, I have a Kodak DX6490. The camera hasn?t been used for a while and upon charging the battery and switching the camera on to "auto", the green camera symbol starts flashing but both the screen and viewfinder remained blank. The camera gives a soft click, but the lens doesn't move and the camera doesn't respond to any of the buttons. After a couple of seconds, the screen starts to glow very faintly. This glow is very obvious in a darkened room, but invisible in daylight. There

A repair will cost a lot- Go for a new camera ... Kodak EasyShare DX6490 Digital Camera

When i try to load photos from my Fuji Camera using the installed software provided (finepixviewer), I select ''load photos'' then, ''from camera'' only to be taken back to the previous menu where i have to select ''load photos'' again. The camera is switched on, plugged in properly AND recognised yet i simply cannot make any progress beyond ''load photos from camera'' can anybody help me?

Just dont use their provided drivers or software. If youre on the Internet and using windows 7 you will always be updated enough for your camera of any brand can download and even altar content to a file on your computer. ... Digital Cameras

The camera will charge and take pictures but I cannot load them on my computer. I have a Mac OS X computer. I used to be able to load them to my Kodak Gallery. Now my computer does not recognize my camera. I have reloaded the Kodak Easy Share software, but this has not solved the problem. I have also tried unplugging and replugging the usb cord.

You might want to consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (e ... Kodak EasyShare C340 Digital Camera

I have a Kodak Easy Share M1063 Digital Camera and when I connect the camera to the USB port of my laptop computer, it no longer recognizes the new hardware device and I am unable to upload pictures. I used to be able to do this. I tried plugging the camera in to a home computer and this also did not work. When I plug the camera into these computers a green light goes on on the camera but the device is not recognized and I am unable to upload photos.

This happens cause the camera is seen as installed but the autoplay is set to do nothing ...either uninstall the driver and plug the camera to run it again ...or ...just go to the control panel /add new hardware ( be sure you plug the camera and powe ... Digital Cameras

I plug in my USB cable to my camera, and to my PowerBook G4 Mac. Nothing comes up. I try going to playback on my camera, and then plugging it in. It says:Easy print start, or pc/custom print. I don't know what to do from there. Nothing pops up on my laptop or anything, so I'm not sure if it's a technical difficulty w/ my camera, or my computer.

Make sure the camera is on and pc is selected on the camera screen when connected to the computer. You will need to have PC highlighted and select ok on the camera as this starts the camera and computer to communicate. Once communication establishe ... Olympus FE-280 Digital Camera

With my camera on the dock and the dock light is on, the battery light does not come on at all.The camera is turned off. It does not show to be charging or to be charged. No light at all. Nearly new battery.This just started a day or two ago. Its been working fine. The dock is Kodak easy share HDTV dock. The camera is Kodak Z8612 IS.

Remove the batteries and clean the battery contacts inside the camera\015\012with a soft cloth (a heavy buildup on the contacts may require cleaning\015\012with a fine wire brush, steel wool, or sandpaper). Remove any residue\015\012that the cleanin ... Kodak Z8612 Digital Camera

I've had my Samsung TL210 for nearly a year. I'm not sure what I've done differently, but my PC suddenly doesn't recognize the camera. I've always plugged the camera into the PC via USB, because the older PC doesn't have a slot for the smaller card or the adapter. When I plug the camera into the PC, the readout shows it connecting to the computer, then the readout disappears and the status light starts flashing. From there on, nothing happens.

I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for the co ... Samsung DualView TL210 Digital Camera

I have a fuji digital camera and i had its c d that come with it the program to load the pictures from the camera and i cant find it.now since i had a problem in my computor and most of my programes are wiped off,i cant load my pictures.can you please tell me how to download this software to start loading my pictures please thank you.

You may go to web link below to download the latest program for your fuji camera:\012\012http://www.fujifilm.com/support/digital_c ... Fuji FinePix A850 Digital Camera

As I Purchased a New Nikon Collpix (S3000) camera, shopkeeper advised me to charge it up 7 hours before the use. As I started charging, Indicator was blinking to show charging, after 10 minutes, it was putt off that is meaning NO CHARGING. I plug out and again plug IN, charging was started again, Same thing happened again, after few minutes charging was stopped automatically. I considered that may be charging is completed. I start to use but after few pictures battery was depleted. I am worry ab

It's not unusual for a defective battery/charger/camera to happen. Take it back and ask for a replacement. ... Nikon Coolpix S3000 Digital Camera

Hi we bought a Kodak MX1063 10 mega pixels 7 6 months ago...We downloaded the Kodak program to the computer with the Disk...But every single time we try to download the pics off the camera, it chooses random pics to download and puts in a Kodak album on the program and it never has downloaded all the pics. It says checking for dups when you start downloading then it only downloads a small handfull out of hundreds of pics even though they are not dups so we cant erase the pics from the camera to

Go to the kodak website & see if there's a newer version of the software and check if there's firmwire updates for your camera if this doesn't help close the kodak sofware & work with your photos in windows if things still go crazy there coul ... Kodak MX1063 Digital Camera

Just loaded software on my Windows Vista Laptop for the Nikon L16 digital camera------everything loaded fine but cannot get it to transfer pics from camera---it is not "seeing" camera when I have it plugged into USB port

Software for camera in a required in Windows computersAnd as you have Vista it is like not compatable anyway.Remove the software and simply plug the camera inWindows will recoginise it as an extra drive in 'My Computer.or ... Digital Cameras

My camera Hello, my name is Amber. I just bought a FE-230 OLYMPUS digital camera from this guy on craigslist. It is in perfect condition, no scratches no drops and it worked perfectly fine today when he sold it to me. We turned it on together and took a picture and I was taking pictures all night with it, then I came home and tried to load the pictures on the computer, I took out my memory card and then put it back in, and then tried to plug a cord in my camera to see if it would load, and it di

Check the battery to make sure it is making good connection ... Olympus FE-230 Digital Camera

I have a Kodak Easy Share camera. Every time I put in the Kodak battery, the battery slowly loses power whether the camera is on or off. I have gone through three batteries. I bought a UBS cord and Kodak plug to charge the batteries and it also doesn't work. Any suggestions?

Thats why you need to stick with the recomended batteries. The regular batteries deplete sooner ... Kodak EasyShare M853 Digital Camera

I have a Kodak digital camera. When I plug it into my computer I ]'m forced to use Kodak Easyshare soft ware to download my pics. For Kodak to store the pics you have to make a purchase every year from their online store. How can I get the camera to download using other software like Photoshop?

Try using a separate card reader to download your pictures to a folder you create on your desktop. From there, you can do anything you want with them. ... Kodak EasyShare Z710 Digital Camera

I have recently purchased a replacement usb cable that connects to my kodak easyshare m753 camera. I plugged the cable into the camera and into the front usb port on my computer. However, i cannot get the camera to turn on. When it is plugged in an I try to press the on button, it'll flash green one time. Then when I try to turn it one when it is unplugged, it does nothing.

Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak Easyshare M753 Digital Camera

We have a Kodak 8.2 mega pixel camera that is approximately 1 1/2 years old. I took pictures and then uploaded them onto my computer. Unplugged everything. When I went back to delete the pictures off the camera card, the camera would not turn on or do anything. I tried to charge the battery but when everything is plugged in it is still totally dark. We purchased a new battery thinking that was the problem and still nothing. When the charger in plugged in there is nothing - no lights at all.

Use NiMH enelop Batt. 1.2v ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3578 seconds