Having problems with your Kodak Easyshare M753 Digital Camera ?

The screen says lens error 1of1,1,0,0 then shuts the camera off


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak Easyshare M753 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

I dropped my camera on the floor while i was taking a picture , the camera shut off , but the lens stayed popped out . i tried to turn the camera on again , but i would only show me the home screen , which says "Kodak Easy Share System , Share" then the camera freexes up , and it say in the top left corner , "lens error : 22" i've tried smacking it against things , i've tried smacking it on my hands , i've tried pulling out the lens , NOTHING WORKS. Please Please Please Please Please Please Plea


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak EasyShare CD33 Digital Camera

I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

Lens Error Once I turn on my camera, I get the regular screen mode and before I can take a picture it says lens error and turns off the camera. The lens comes out all the way once turned on and retracts once it shuts down.


Try the procedures in this tip. ... Pentax Optio 60 Digital Camera

Lens Error Whenever I try to turn on my Cannon Powershot SD1000 digital camera the screen says ''lens error, restart camera'' but then it shuts off. What should i do?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot SD1000 Digital Camera

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error I dropped my digital camera just recently back in October and all of a sudden when I turn the camera off the lens is still out when it's suppose to be in... I really don't know how that hap


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Fuji FinePix A345 Digital Camera

I turn on the camera and the lens does not open. The screen says lens error restart camera. Then it shuts off.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD790 IS Digital Camera

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error


It could be jammed or when you turn it on, your finger or somthing is in way of it opening all the way. ... Kodak EasyShare M853 Digital Camera

Lens error When I first power on my camera, it tells me to retry power on. When I do, it says lens error and shuts down. The lens will extend and then close before the power shuts off, however it does not close fully. The protective shutter on the lens doesn't close completely. I have tried removing the battery and letting the camera sit for awhile hoping that the camera will reset, however this has been of no help.


Maybe the lens is stuck. ... Casio Exilim Zoom EX-Z80 Digital Camera

System error When I turn on my digital camera the lens opens and closes and then the screen appears and says system error and shuts off compleatly what do I do?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sanyo Xacti VPCX1200 Digital Camera

When I turn my coolpix S220 camera on, the lens opens and shuts with a very strange noise and then the screen says "Lens Error"


Try the procedures in this tip. ... Nikon COOLPIX S230 Digital Camera

My Olympus SP-550UZ 18x optical zoom has a problem. I turn it on, and the lens starts coming out, but it get stuck, and the sounds is this clicking noise. Then on the screen it says ZOOM ERROR and red text. After the lens goes back in and the camera shuts off. I've had this problem for a while and I searched everywhere to fix it. Help!


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus SP-550 UZ Digital Camera

While watching videos and reviewing the pictures on the camera, the screen will turn black and say lens error shutting down error 32.


You need to send it in for warranty ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

There's a message on the the screen of the camera that says: "Lens error. Will shut down automatically.Restart camera." Model: Canon Powershot SD13000


See Lens Error ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Lens error my canon IXUS 860 IS is having a lens error problem. firstly, the lens cant retract back and when i try to switch it on, the screen will say 'lens error, restart camera' so how do i restart the camera?? i'm currently overseas and although my camera is within warranty, i cant possibly send my camera back to the original country for repair. is there any DIY method?? i'm an amateur at cameras so i do not wish to try any method that may further make the problem worse. thank you for your h


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon IXUS V2 Digital Camera

How do you fix 'lens error restart camera' I put it in my bookbag. I guess i threw my bookbag around and now i have this "lens error, restart camera." The lens froze halfway and it's staying that way. Please help. when i turn on my camera it says lens error, starts beeping, and then shuts off


WE WENT TO THA BEACH AND TOOK SOME PIC AND LATER THAT DAY WHEN WE WENT TO TAKE MORE PIC IT SAID LENS ERROR RESTART CAMERA BUT WE DON'T KNOW HOW TO RESTART THE CAM ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Lens error I tried to turn off my camera, (Digital Ixus 60) and the lens froze halfway closed. When I tried to restart the camera, an error comes up on the screen, saying LENS ERROR, RESTART CAMERA. I had this problem before on this camera, but while it was still under warranty. I sent it to be fixed, but now it seems the problem isn't fixed. Is there anything I can do now?


The only thing is, is that it is past it's warranty. THE WARRANTY ONLY COVERS DEFECTS, AND FACTORY ERRORS. \015\012\015\012IF THE LENS DOESNT GO BACK IN, THEY CANT FORCE IT AND YOU PAY THE FULL COST OF THE ENTIRE LENS BEING REPLACED AND T ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

My Nikon coolpix S10 camera was dropped and now the screen only says "lens error". If it is not touched the function returns to normal (has done so twice), but now the screen only say that one message and you can't turn it off or do anything). When it was turned off again and then turned on after a series of clicking noise the screen only said "lens error" and does not allow any other options(even turning off). Any helpful ideas would be apprecited. Thank you!


Hi,try this out it worked for most of them who had a similar problem like urs:Gently tap it twice at the end of the camera to ur plam and it will work again.just tap it very lightly against the bottom of the camera holdi ... Digital Cameras

Lens error When I turn on my camera it will say coolpix but then the screen will go black and the lens will adjust a couple of times then the screen says lens error on it. What should I do?


You should have dropped your camera down. try tapping the device when the message pops up. if it works then you are lucky if no then take it to a service centre to get it done. it costs about 60$ ... Nikon Coolpix 3200 Digital Camera

Nikon Coolpix S10 Problem: Lens Error The camera is less than a year old and "Lens Error" has suddenly appeared on the LCD screen. The camera makes a vibrating noise when it turns on then stops. I can do nothing with the camera including shutting it off. I need to take out the battery to shut it off. Help!!!


You can take pictures ( without VR function ) by starting your camera from play button then switch to photo !Lens error appear after a shock . VR mechanism have piezo actuators glued with epoxy resin together with an c ... Digital Cameras

Focus error I am from the Caribbean Island of St.Kitts and I was on holiday in London, England in August 2006 and I bought this camera. It worked wonderfully and I took plenty pictures. I had no problems at all with it until now. When the camera was turned on there was a sound coming from the lens area. The lens are open and will not close. On the screen there is the warning display "focus error." Can I get a solution to fixing this problem Screen says focus error , makes noise.


Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Fuji FinePix A500 Digital Camera

Lens error, restart camera telephoto lens is stuck in zoom position and won't retract, so when i turn on camera, screens says "lens error, restart camera", but it won't restart...just keep coming up with same error message


Hello mnickoliThis is a fairly common error especially with the A560.This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. This is a very , if not the most common problem\015\012with modern digit ... Canon PowerShot A560 Digital Camera

Lens error my camera keeps saying lens error and then shuts off my lens won't come out and it says lens error 111,0,0,76 i am getting really frustrated


Hello \015\012\015\012it may be a bug or caused by impact damage, even the technical support team doesn't have the meaning of that error code but for troubleshooting you can call 1 800 235 6325 opt. 12 or go to ... Kodak EasyShare C613 Digital Camera

Lens error My daughtor droped a Canon PowerShot A570 IS on the floor an now its broken: Lens remains extended and open, at switching-on the Error "lens error, restart camera" apeares on the LCD Screen, the Lens moves a little bit, and the camera shuts off after some seconds. Any Advise how to self repair it? Regards Peter


Hello folks,\015\012\015\012I hate to be the bearer or bad tidings but you have all suffered from what is probably the number one affliction of digital cameras - the deadly child drop :-(\015\012\015\012In almost all cases the ... Canon PowerShot A570 IS Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5411 seconds