Having problems with your Kodak EASYSHARE M763 Digital Camera ?

Lens not stop

\015 When i try to turn on my camera, the lens never stop, start to out anda back to closo and never stop. What can i to do?\015

Answers :

Hey felipelom,
\015\012 What is most likely going on is the camera has something obstructing the movement of the lens (i.e. sand), and I would first try blowing compressed air into the side of the lens to try and dislodge what is stuck in the lens. If this doesn't work it is possible the lens mechanism is damaged and you would need to then have the camera looked at by an authorized service technicians. If the camera is less than a year old the repair could be covered under manufacturers warranty, and you could bring it to a Geek Squad® precinct in a Best Buy™ store and they could send it out for service. I hope this helps!
\015\012
\015\012Sincerely,
\015\012Allan
\015\012Go Ahead. Use Us.
\015\012
Repair Help & Product Troubleshooting for Kodak EASYSHARE M763 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When you press the power on button the camera lens starts to move out stops goes in then out again stops the screen does not illuminate at all.IF you then press the power button the lens tries to retract slightly but then stops and again nothing else happens. battery is fully charged. if you press the replay button screen and camera behaves as normal and you can view the pictures taken lens usually retracts all the way to its docked position again if it was nearly all the way out.


... Sea and Sea UNDERWATER DIGITAL CAMERA DX-1G Scuba Gear Cameras

Lens Jam My G6 turned on accidentally in its case and the lens tried to extend but was forced to stop. Now, when I turn the camera on, the lens makes a ratcheting sound and gets halfway before stopping. It beeps and says "LENS" on the top LCD screen, before powering off. I've been quoted £160 just to have it looked at which is half the value of the camera! Does any one know how to open one of these up (safely) and what to do when you get inside to fix the problem?! Many thanks


Did u ever get this problem sorted, as I am having the same issue now. But mine just did it one day after turning it on ... Canon PowerShot G6 Digital Camera

My D80 suddenly stopped taking photos while I was in Auto mode. I noticed the flash stopped releasing. I've changed lenses, reset the camera's green buttons, switched out the card, reset the clock. It will occasionally take a photo, not necessarily in focus,and the flash will on occasion pop, but I can't figure out what the correct triggers are. Can anyone help? Lens is 18-135mm. Set Lens in in "A" and camera is in "AF"mode. Thanks much.


Hi, Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689. ... Nikon D80 Digital Camera with 18-135mm Lens

My Nikor AF 1.8 50mm lens does not allow me to change f stops and is fixed at f22 on my Nikon N2020 AF camera. Is there some way to get this lens to allow use of all other f stop settings? Conversion ring of some kind?


You're welcome. Glad to be of service. ... Digital Cameras

My Ricoh Caplio R4 will turn on but the lens stops half way. All data comes up on screen, but you can't clear any of it. Then after about 10-30secs, the camera turns itself off and the lens is stuck half way out. Battery is fully charged, was working properly, then just stopped. What could be the problem?


Hello Mar LizThis is a fairly common error with most digital camera's .This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. Given that the lens is stuck halfway , we can rule out a sensor proble ... Digital Cameras

Accidentally I dropped my Sony DSC S500 camera. Now the shutter is jammed. When i switch on, the lens ejects out and stops half way. While switching off, the lens doesn't come back to normal position, instead it stops in half way ejected position. From the LED display i could see a blurred image. I am able to see all the photos that i have taken so far, but am not able to take any new photos.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Sony Cyber-Shot DSC-S50 Digital Camera

Coolpix 7600 lens are out and camera is off. It won't turn on and lens won't go in. I traded batteries out. I was deleting photos off the camera when the screen went black and it stopped. For a few seconds the on/off light blinked then stopped.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix 7600 Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

I have the same problem with my Lumix DMC-TZ3 lens error states "Turn off camera and then turn back on" Though my lens tries to adjust then stops. The power stays on with the error message. Til I turn it off .The lens still does not retract. Now when I turn it back on the lens will do the same thing. I don't think its the lens. How would someone repair or replace firmware. Can it be done over the net?


Of course it's the lens. Try these:\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE most ... Panasonic Lumix DMC-TZ3 Digital Camera

My D80 was purchased in April 2008 along with the Nikkor 18-200mm VR zoom lens. The camera and lens worked flawlesly until this past week end. The cameral stopped focusing in auto mode with no warning. I did hear a whining noise when I tried a Tamron 11-18mm wide angle lens. The auto focus did not work with that lens either.


Make sure your AF-switch on your camera and your lens are both turned on. ... Nikon D80 Digital Camera with 18-135mm Lens

I have a Nikon D70 (with a 18-55mm lens) and have always used it in Auto mode. It suddenly stopped working in auto mode...won't take the picture at all. Did I break the lens??? If I tip the camera back and forth the lens will move (zoom in and out) by itself...don't remember it doing that before??? Fixable or do I need a new lens?


Hi tina549, do any of your other lens auto focus? If so then it may be this lens. If they do not then look on the right side of the lens mount (with camera facing you) there is the AF and M switch. Something to try is clean the electrical contacts on ... Nikon D80 Digital Camera with 18-135mm Lens

My Olympus Fe-230 camera's lens won't open. I turn the camera on and it makes the sound of the lens opening, and the lens begin to "push out" but then retract. This happens a few times and then the camera stops "trying" to open. The actual lens is never exposed [as in the black 'cover' never opens]. How do I fix it?


Try these procedures. ... Olympus FE-230 Digital Camera

I went to turn on my nikon coolpix L18 and the lens came out and it stop and it says lens error and the lens does'nt want to go back in or it wont let me take pictures cause it says lens error


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon COOLPIX L18 Digital Camera

Lens error message, bells, and lens goes in and out and stops out. Remove and replace battery and press play and get picture, press camera and lens goes out and LCD works for a few seconds and then goes dark. No way to retract lens except remove battery and reinstall and press play then battery out.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Casio Exilim EX-S500 Digital Camera

Just got a 500mm f8.0 Telephoto Lens for my Nikon D90. When I connect it according to the instructions I am certain I have mounted the lens properly to my camera, I have a universal T mount to connect to my Nikon. When I turn on the camera, It flashes in the top info LCD F- -, My thought is that this is the F-Stop or the Focal length which I will need to select on the lens and input on the camera somehow, am I on the right track since I am a novice. It will not take a picture through this len


The lens lacks the electronics to communicate with the camera. You must switch the camera to Manual exposure mode by turning the mode dial to M. The lens has only aperture, f/8, and so you have to control the exposure by changing the shutter speed an ... Nikon D90 Digital Camera with 18-105mm lens

LENS ERROR I brought this Nikon Coolpix L3 a little over a year ago.I did not drop or abuse it but now the lens locked and all functions stopped. There is the " lens error" notification.I hate losing use of this camera because otherwise it is very good.


Buy a new camera ya idot ... Nikon COOLPIX L3 Digital Camera

Sony cyber shot with Carl Zeiss lens, 8.1 megapixels, model # DSC-H7 ...... when camera is turned on, the lens has stopped coming out rendereing the camera inoperable?? You can hear the lens trying to move, and then instruction on screen to "turn power off and on again".. still no results???!!!


This is a common issue if the lens cap is on, I will assume it is not so something is binding the lens. It is probably sand or a misaligned lens. Try grabbing the lens barrel as it extends, you will need to remove the outer barrel to do this. If does ... Digital Cameras

Lens problem turns on ok then lens goes out and in and out and in seeking focus it appears, then stops and screen says lens problem. it will then not do anything until shut off and on then it repeats the same thing. tried removing battery and putting it back, but no luck.


Try the procedures in this tip. ... Nikon COOLPIX L18 Digital Camera

Lens error my Camera is Canon IXUS 860 IS. while i was taking picture the lens stops working properly and it says lens error, restart the camera at left bottom of the camera screen.


Have same problem as above. Apparently the gears in the lense slip a tooth, they can be re-aligned but this involves taking out the barrel, my question is, how do you do this as I don't want to pay Canon the AU$250 for a new barrel. ... Canon IXUS 860 IS Digital Camera

3 beeps One day my camera was working fine. The next day, I tried to turn it on and the lens came out just a little and then it stopped and beeped three times. It now makes this noise everytime that I try to turn it on. It did this before when the lens was uneven. However, the lens appears to be in proper place so I don't understand why it is doing that.


After some attempts to turn on the camera following the instructions posted in this page, i just bang the camera when y press the start button, and the lens was released, and the camera start up with no problem :) ... Samsung Digimax D53 Digital Camera

My Nikon D700 Camera is sometimes not recognizing my having a cpu lens (24-70 f2.8 & 105 Macro f2.8 VR) attached and giving me a the error as listed on user manual page 410 with F No lens attached, or non-CPU lens attached without specifying maximum aperture. Aperture shown in stops from maximum aperture. Aperture value will be displayed if maximum aperture is specified. Pages 210 ? 2 4 (blinks) Camera unable to focus using autofocus. Focus manually. Page 81


... Nikon D700 Digital Camera

Hi all, I wonder if you can supply some advice regarding a Sigma17-35mm lens I purchased earlier in the year. Basically if I use the automatic or 'P' setting on my Canon EOS 30D camera the image is over exposed by 1 to 2 stops. If I use the same functions with my Canon 18 -55 kit lens the exposure is correct so I would presume the camera is not causing the problem. The only way I can get a correct exposure with the Sigma lens is to compensate manually for each shot. Please note the exposure p


Try your EOS in AV (aprature value) mode. You should be able to adjust your aperature value in 1/3 or 1/2 steps dependind how you have your Custom Functions set in your camera's menu. Possibly the lens you purchased is for an EOS 35mm. If you use a 3 ... Sigma Digital Cameras

Lens error hi my camera stopped working the other day...it turns on but the lens wont come out and it says there is a lens error then shuts of....is there an easy way to fix this?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak Easyshare M753 Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

I'm a new user of the D90 (and digital in general), and on my first major trip with it I had problem with the shutter not working. I would take some images, put the camera down without turning it off and move on to the next spot. At the second stop the camera would not work. I'd turn it off, remove the battery, run the lens in and out and eventually it would work again. The message I got was F--, which said that the lens was not installed properly. However the lens was never removed. What's


George,Since you didn't say if this was a "new camera & lens" or if it was a "new to you" camera and lens, or which *exact* lens you have, there are a couple of ways this can work.Nikon lists the following remedy for error ... Nikon D90 Digital Camera with 18-105mm lens
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1014 seconds