Having problems with your Kodak EasyShare M863 Digital Camera ?

When turned on I get a red light and a msg that says date and time reset but it won't do anything M863 Kodak


Answers :

If the camera still remains on after asking for the date and time. Sounds like there is a firmware issue w. the camera. However KODAK doesn't provide a firmware update on the website.
\015\012
\015\012So you will have to send the camera in in order to solve the issue.
\015\012
\015\012However if the camera turns off:
\015\012
\015\012Here are the steps:
\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.
\015\0122. Clean the battery contacts.
\015\012a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
\015\0123. Without the memory card,turn on your camera.
\015\0124. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.
\015\012
\015\012Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490
Repair Help & Product Troubleshooting for Kodak EasyShare M863 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When turned on I get a red light and a msg that says date and time reset but it won't do anything M863 Kodak


If the camera still remains on after asking for the date and time. Sounds like there is a firmware issue w. the camera. However KODAK doesn't provide a firmware update on the website.\015\012\015\012So you will have to send the camera in ... Kodak EasyShare M863 Digital Camera

Well when i take a picture, it takes it. but when i try and take another picture, it just beeps three time. and then i tried to turn it off, and it wont do that either. it just says "please wait for your camera to finish recording" but im not recording anything. and i waited for a bit to see what happened. and all it says not is "system error" in red. the only way to turn it off is to take the battery out. i tried to reset it. but nothing is working...


Sounds like you have a bad camera,try to take it back to the store you got it from and tell them what is going on,be careful thou as people are getting stupid nowadays. ... Digital Cameras

KODAK LS753: when the camera is powered up the screen comes on to set date and time. The selector five way switch can move between set and cancel. When the switch is pressed straight in nothing happens. I was thinking there may be a hard reset somewhere on the camera to clear this glitch. Cycling the power does not change anything.


... Kodak EasyShare LS753 Digital Camera

Hi Dimage A2 . getting xxx in red , very small on screen, wont let me take photos , tryed to reset it , do i need to reinstall anything . please tell me is easy. i love my camara. many thank s ian


... Konica Minolta DiMAGE A2 Digital Camera

Joystick not working. The cam turns on and prompts for date and time to be set. The only thing I can get it to do id to move the curser up and down. I can't slect anything to continue to set the date & time. I opened the cam and found that I can replace the button if I can find a replacement. Thank you.


To reset the date connect Camera to PC. Open Easyshare Software, Go to Tools and Select SYNC. This will usually set the Camera Time/Date to the PC Time and Date. I have the same problem,(DX7630) cannot Move to the Right or use the Enter on Joy Stick ... Kodak EasyShare DX7630 Digital Camera

Removing date/time I've already taken some great pics on my camera, but when i got the images back, and when I review the photos on the camera, I now notice the little red date and time info in the corner of my pics. Some of these pictures I can't wait to frame, but not with that crap in the corner...can someone tell me how to remove the date and time from the photos I've already taken, so I can get unspoiled images. Thanks, A


Inpaint is a uniquely easy to use software solution for effectively removing unwanted elements from digital photos. It allows the user to remove people, blemishes, distractions a ... Sony Cyber-Shot DSC-P73 Digital Camera

I have a new Canon PowerShot A570 IS and can't figure out how to get the Time and Date to show. When I go to menu and come to the time & date (That says Off) it skips past It wont light up so I can put it on.


In order to embed the date in the photo, the camera has to be in the "Postcard" mode. That's on the same menu as the picture size -- L, M1, M2, M3, S, Postcard. Once set for Postcard mode, the date/time can be turned on. ... Canon Digital Cameras

How do i turn off the date on my kodak m863 camera. I turned it on a long time ago and it won't give me an option to turn off the date and time. HELP!?


HI there press the menu , then scroll down for setting option . From setting you can find the date & time on/off option. Select from there as per your choice & use that. Thanks & waiting for your feedback. ... Kodak EasyShare M863 Digital Camera

How do I get the date and time to show up on either printed pictures or on my downloads onto my home computer? I have set the date and time but it doesn't show up on anything, even my cameras own screen.


The date and time plus a lot more information is stored with each picture as "metadata". It can be retrieved in most photo editing programs. After downloading to your computer, if you just right-click on a picture file, the date and time will appear. ... Sony Cyber-shot DSC-N2 Digital Camera

My wife's Kodak Easyshare V1253 has to be reset (date and time) every time we replace the battery. What could the problem be? Also, it takes too long to take one picture from another (probably setting regarding display time). Other than that, great camera!


Regarding the date and time, Actually its normal everytime you removed the battery you need to reset the date its is because the camera doesnt have a internal or built-in battery that can run the internal clock or maintain the date settings., ... Kodak EASYSHARE V1253 Digital Camera

My kodak easyshare m340 accidentally got pushed off my nightstand and onto the wood floor. from the outside, it doesn't look like anything's damaged. but when i try to turn it on, the lense part does not extend as it usually does, and the light on it blinks green once and then red a few times. Is there anything I can do to fix this? Thanks


\012Hi,Here is a tip that I wrote about How to get a Digital Camera Lens to work againSteps to Repair a Dig ... Digital Cameras

How do I delete the date from my Pentax E10? I can get to the date and change it but don't see anything on how to delete so it wont show up on my photos. Thanks for any help you can give me...linda


Press the MENU button. Select Menu3. Select "Date Imprint". ... Pentax Optio E10 Digital Camera

My Pentax wont keep its date or time. I set it, turn it off and on again and it has reset to default date


Http://www.pentaximaging.com/files/manual/istD_IB.pdf\015\012\015\012\015\012\015\012Most likely the batteries need to be replaced, or they are ... Pentax *ist D Digital Camera

My nikon s510 shows a red icon and does not flash anymore, Also the date and time reset function does not work. The date is frozen at Sept 1, 2007. Anty thoughts about how it can be fixed or should I dump the camera at this point. It still takes photos.


... Nikon Coolpix S510 Digital Camera

My Kodak C913 camera keeps telling me that the memory card is protected and to reset switch on memory card. This happens with a brand new 1 GB card, or on the 4 GB cards I have. (I have tried different cards and its always the same message that pops up) No matter how many times I reset the lock, I still get the message. I love the camera but have only had it a few months and its driving me crazy.


The switch should be in the unlocked position...is that where you have it? ... Kodak EasyShare C913 Digital Camera

How do I reset my panasonic lumix camera I need to reset camera to a new state. including getting rid of time and date settings?


... Canon PowerShot SD890 IS / IXUS 970 IS Digital Camera

I have a Moultrie 4.0 game camera. The only thing I can get to come on is the Laser Aim to come. What can i do? I can't even get date time or anything to come. Is this junk or what?


Do ya still have this camera? I may be interested if ya want to sell it as is. [email protected] ... Moultrie GameSpy 4.0 Digital Camera Deluxe

When i go to charge my kodak M863 camera (in the wall or by USB) the green light flashes and then the red light blinks 3 times. please help this is the first time charging my camera.


You can used the USB cable to charged the camera, But some of the M863 camera will not take charged usign the USB cable., I strongy suggest used the AC adaptor just make sure the AC adaptor is 5V ac adaptor it will only charged using the 5V adaptor., ... Kodak EasyShare M863 Digital Camera

My Kodak EasyShare M853 has an intermittent fault. The image looks Ok on the preview and then when i take the pic they have purple, red and blue horizontal lines on them. It started a week ago and when it first happened seemed to get better when I shook it, but seems to be most of the time now. The video seems to work at moment. hope someone can help


Go into the menu settings and then you can change megapixels and transfer size. ... Kodak EasyShare M853 Digital Camera

Trying to set up my camera & goofed on the setting the date/time. I pressed the ok button before after I entered the year!! How do I get back to the screen to reenter the date & time info? I have a Kodak Easy Share C813. Thank you.


Hi - You can download the manual by clicking the link underlined in blue below: C813 ... Kodak Digital Cameras

I just got my kodak for christmas this morning I went to turn on the camera and the lense came out but I don't see anything on the lcd adn now it wont (turn off, it is frozen) I had just charged it, the other day it did the same thing but that time it was due to the battery and finaly did turn off. ARe others having this problem alot, it almost seems so.


If it's brand new...take it back. There must be a million defective Kodaks out there...at least that's the impression I get from reading all the entries on this website . ... Kodak EasyShare M1033 Digital Camera

How do i get to change the date and time? I have the kodak easy share c713


You will find this in your camera menu. ... Digital Cameras

I love the 1050 i take it on my harley and bring it home instll the pictures in my computer or print them with my printer / but i can't get the time & date to not print / i know how it won't do it. can you suggest anything.


... DCS Norcent Technologies XIAS DCS-1050 Digital Camera

How do i get the time & date to display? - Kodak EasyShare Z612 Digital Camera


Go to MENU\015\012scroll down to SET UP MENU\015\012scroll down to DATE STAMP\015\012Hit OK\015\012and then select your format or you can turn it off and on from there ... Kodak EasyShare Z612 Digital Camera

I keep gettin lens error restart camera on my canon powershot sx100 and the lens wont retract. I have turned it on and off several times now. Is there anything i can do to get it working again?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot SX100 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3559 seconds