Having problems with your Kodak EasyShare M863 Digital Camera ?

Driver not loading on new computer using windows 7


Answers :

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.
Repair Help & Product Troubleshooting for Kodak EasyShare M863 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installed driver kodakeasyshare m863, cannot load pics to computer, says driver did not install properly. when I install driver again, it says it was successful. I try again to load pics and get same message. have a new computer w/ windows 7. it worked before with old computer and windows xp.


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Kodak EasyShare M863 Digital Camera

Driver not loading on new computer using windows 7


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Kodak EasyShare M863 Digital Camera

I have just bought a new computer running Windows 7 OS and I can not seem to use my camera on this system. I did install it on a computer running Windows 98 successfully. Do I need to install a new driver? and if so where can I get one. My camera is a Casio Exilim EX-Z40


Yes, you will need an updated driver for the camera to operate it on a Windows 7 system. Unfortunately, Casio does not list a Windows 7 driver for the EX-Z40. At this point your only recourse to to email Casio via the link below or call them at 1-8 ... Casio Exilim EX-Z40 Digital Camera

Have old Olympus D-510 and Camedia Master 2.5 Software. Used software back with old Win98, then new computer to Win XP, downloaded update for 2.5 to work with XP. Now have another new computer with Windows 7. Question no. 1 - A friend who is a computer technician told me I dare not download any older software programs as they could ruin Win 7 operation. He said go to websites and download new software. Got to this site it says it can run a scan and replace driver or whatever is needed, but


Your friend is correct...you could cause problems trying to install an old software program on Windows 7 (although it probably would just reject it). Windows 7 sometimes comes with photo editing software already loaded. If not, there are free program ... Digital Cameras

WILL THE REBEL 300D DOWN LOAD VIA IT'S USB CABLE TO MY COMPUTER WITH VISTA AS MY OS? I CAN ONLY USE AN EXTERNAL USB CARD READER TO GET MY PICTURES. CANNON'S SITE DOES NOT OFFER DRIVERS FOR VISTA 32 OR 64 BIT. SOME SITES CLAIM TO UPDATE ALL DRIVERS, BUT FOR A FEE. MY COMPUTER RECOGNIZES THE CAMERA AS NEW HARDWARE BUT EVEN WITH THE DISK WITH TWAIN AND WIA DRIVERS 5.2.1 IT TELLS ME THERE ARE NO DRIVERS ON THE DISK. THANKS, MICHAEL


Please get it at these links :\012www.nodevice.com/driver/.../Canon/Digital_Cameras.html\012\012 ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

My old computer crashed and I bought a new toshiba laptop but driver disk and the camera connector to the computer won't work since the new one is all usb ports. How can I still use my camera with windows 7?


Google the model and make of your camera with the words FREE DRIVER and see what comes up\015\012You may get lucky enough to find a driver ... Agfa ePhoto 1280 Digital Camera

I successfully loaded the software that came witht he A75 onto my new Dell PC (OS = Windows Vista). Afterwards I connected the camera to the PC using the provided cable and the computer recognized it. I then followed the directions for using the software for the first time, but nothing happens. Any thoughts about what could be wrong?


If your camera is not relatively new and you're running Vista, Vista may have problems seeing it. Unfortunately, this can't be corrected as Canon did not update the drivers for your camera for Vista. But there exists a good, if not better alternati ... Canon PowerShot A75 Digital Camera

My new c813 software is corrupt right out of the box. I plug in my camera and it isn;t reconized. It can't find it under wizard. I need the driver to make the camers load to my compter. My old kodak used to load to windows expl this one won't do anything


Go to the manfactures web site the Drives and all the software should be there. ... Kodak Easyshare C813 Digital Camera

I have a Jam Cam digital camera version 2. I am now running Windows 7 on my new computer. Are there any updated drivers that I can download so that I can use this camera with Windows 7? If not I guess I will throw it away. Please help me!


Please get it downloaded at :\012www.driverssoftware.com/drivers.php/...camera-driver/20230\012\012 ... KB Gear JamCam 2.0 Digital Camera

MY FUJI S5000 DRIVER WON'T INSTALL ON MY NEW COMPUTER USING WINDOWS VISTA. I CAN'T SEEM TO FIND A DRIVER ON THE NET. HAVE ANY IDEAS? THANK YOU! MARK


Sick about dumb answers from "i know the best" idiots.The question is: "can't find drivers for vista on net, any ideas?", not "i am stupid, do i need drivers?" or "can i get a card reader to remove the memory card and connect it to my pc to a ... Fuji FinePix S5000 Digital Camera

I can't get photos to upload from my Canon S500. Always in the past I just made the USB connection and I got a dialog screen telling me what to do. Now I have a new computer (running Vista, just got my Windows 7 upgrade and haven't loaded it yet), and it gave me a short message about "driver installed and then nothing--no icon, no nothing. It does make a sound when I connect and disconnect the camera. I went to the Canon site and they say there's no special software to download for this.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S500 IXUS 500 Digital Camera

I just got a new hp laptop with windows 7. i loaded the software for the camera successfully and the driver for the camera. when i connect the camera to the computer with the usb cord, the camera is not opeing the eos utility and i don't think it is recognizing hte connection. do i need to do anything else to set up the connection?


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Canon PowerShot SD600 Digital Camera

Bought new computer which is Windows 7 and the digital camera driver disk will not load. How can I correct this?


Canon does not list a Windows 7 driver for this camera.Consider NOT connecting the camera to the computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging ... Canon PowerShot A610 Digital Camera

I cannot load photos from my camera to my computer. I reinstalled the driver, but it did not help. Camera screen shows USB when I plug in the camera and the system lists imaging device FinePix J10 #3. I use Windows XP. Help!!!!!!!!!!!!!!!!!!!!!


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Fuji FinePix J10 Digital Camera

Have Nikon Coolpix 885 dig. camera, bought in 2000, still works OK. I had been transferring the photos to my old computer using "Nikon View" 5 version 5.0.0 software that came with the camera and my Windows XP operating system with no problems. I now have a new computer using Windows 7. This is my question: Will it be OK to install the original "Nikon View" 5 disk with Windows 7 or is there a newer "Nikon View" software to work with Windows 7 and my old Coolpix 885?


Nikon View has been superceded by Nikon Transfer and Nikon ViewNX (the transfer and cataloging/viewing\302\240functions have been separated). You can download\302\240the\302\240current versions of all (free) Nikon\302\240software fromhttp://su ... Nikon Digital Cameras

I want to install a Picture project to transfer all of my picture from my camera to my computer..but the problem is i'm using windows seven and i cant use my Picture project disk coz its not working in windows seven. can u give a site or where i can find a driver of picture project that suits to my computer windows sevens...tahnks i will wait for the answers


Picture Project was retired years ago, replaced by Nikon Transfer and Nikon ViewNX. You can download the current versions of all (free) Nikon software from\012\012\012http://support.nikontech.com/app/answers/detail/a_id/61You might ... Nikon Coolpix L11 Digital Camera

Using windows 7. Camera not recognized but did used to be recognized two weeks ago. Camera and usb cable connection are recognized by another computer using Windows ME. Driver Boost says correct driver is installed. Ken, Cobourg ,Canada


Have you considered NOT connecting the camera to the computer?\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either bui ... Canon PowerShot A75 Digital Camera

My canon rebel digital es camera won't load to my new toshiba laptop with windows 7. Canon says Windows 7 should recognize it and therefore does not have drivers on their website. Windows 7 says I should load the drivers. Anyone figured out how to handle this?


... Canon Digital Cameras

Camedia Master I have been using Camedia Master on my computer to edit my photos, for some time now. I like it very much. We have recently bought a new computer however, with Vista already installed. The program has worked fine until recently, but now when I try to use it, I get the message "A problem stopped the program working correctly. Windows will close the program and notify you if a solution is available." That is all that appears to happen, & I hear nothing from Windows! I just cannot us


To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp ... Olympus Camedia C-740 Ultra Zoom Digital Camera

I have two brand new Dell computers that have Windows 7 application. I just purchased a Kodak Easyshare C182 digital camera and can't upload to the computer. It keeps giving me a driver error. I have unistalled and reinstalled the software 3 times. It appears that the driver is not compatible with windows 7. Anyone know how to get around this issue?


Here is a another way to upload your images from camra to pc.your camra does have a sd or memory card? upload the images from m.mc through memory card reader ... Kodak EasyShare One Digital Camera

My dell inspiron (with windows vista) is not recognizing a new Canon G10, so i am unable to download photos. i have tried all the suggestions in the Canon G10 manuals for troubleshooting and have followed all of the instructions for connecting camera to computer, but nothing works. the Canon website says that there are no drivers required for this camera with windows Vista, and provides no drivers that can be downloaded. My computer does not recognize that the camera is attached when I look in D


You can download the vista drivers here on link below. Just click on the drivers and downloads in link. Them click on your operating system and pick vista or vista x64. Then go down to the next box software 2 down.\015\012\015\012 ... Canon PowerShot G10 Digital Camera

Downloading pictures I have a new computer ,has windows vista. I downloaded the original camera solution disk to the new computer according to the instruction . my camera is attached to computer using proper connection. when I wanted to download images, my computer tells me tells me that the camera is not recognized. I already contacted my computer people and they say it is from my camera. Any idea to help me? I appreciate your time and effort. Mehri Yazdi


Greetings myazdi,\015\012\015\012It is unfortunate that some cameras as well as other older programs and Vista do not get along. One solution I have heard of is to utilize a memory card reader such as any of these:\015\012\01 ... Canon PowerShot A530 Digital Camera

When I connect my camera to my computer, it appears to be empty. I have over 1000 photos on it which show on the camera screen, but the computer sees none. I have even tried downloading the drivers and 'Nikon transfer' package from the disk that came with the box. I am using windows xp. Why does my computer not read the camera? When I open the S52 folder in my computer, there are no files. When I then press 'get pictures from camera' it says that the camera is in use. What am I doing wrong?!


First of all, why on earth would you keep 1000 pics on the memory card? They are not meant for storage....they can be easily corrupted and you could lose your pics. You need to get a card reader and use it to download your pics. Then, format the card ... Nikon COOLPIX S52 Digital Camera

No driver or manual, I amrunning windows 7 the camera will not install because windows can find no driver in it's driver files. The firs time I installed it the computer said to go to a specifc site on line to get the driver I did so..and the thing installed...I had no instructions for the camera so I unistslled it to try again...and again ...and again...it just wont load...and I cant find that web site again


It's www.digitac.com However, for the next few days, they say they're updating the website and you can't download anything yet. ... Jazz JDC27 Digital Camera

I have a Sony Handycam Model# DCRA-C162. I do not have a driver for it. I lost the CD and I changed computers since I bought the camera. It is a older computer that I use with Microsoft Windows 98 installed. Can you please tell me where I can go to install the driver for this camera? Please give me the answer ASAP because I have photos that I need to download to my computer now! Thanks, Margaret Harrison


I am pretty sure your Windows operating system will automatically download your pictures after you plug in the USB cable. I looked everywhere online and on Sony's website and I do believe you need the cradle to ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2538 seconds