Having problems with your Kodak EasyShare M883 Digital Camera ?

Turns on and zooms in and out then turns off - Kodak EasyShare M883 Digital Camera


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
My problem was sand, I used canned air to blow at the lens while it was extending in and out. I held the on button so that it would keep going and finally it just stayed on.
Repair Help & Product Troubleshooting for Kodak EasyShare M883 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Turns on and zooms in and out then turns off - Kodak EasyShare M883 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EasyShare M883 Digital Camera

My kodak easyshare MD853 digital 8.2 camera has some problems.. When I turn it on it says: lens error message 122,1,0,0 and the zoom will not retract back into the turn off position.. I called Kodak & it's still under warranty however they say if it's something that not under warranty they will charge me anyway... I bought insurance through Target as well & they referred me to kodak. Does anyone have any suggestions on how to fix my camera?


My camera i dropped it and it was off and i waiting a few minutes and then picked it up and tried to turn for a photoshoot and the dum camera wont work now it says a lens error and it wont come up or anything, so i dont know what i should do ... Digital Cameras

Recently, i've been having an issue with my Kodak Easyshare M883 camera Every time i press the power button, the camera turns on, makes a weird noise, zooms in and out to refocus, makes the noise again, then completely shuts off. Its done this every time i turn it on for about a month now. I am completely able to review my pictures, let alone take any. I've tried plugging it into the computer, and even charging it overnight. please help me.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare M883 Digital Camera

Strange noises I bought it last week and its makes strage "clicky" noises when on. I've exchanged it twice and all 3 have made the same noises. Is this normal? They don't sound like normal camera noises and the store where I bought it listened and agreed that each camera seems to be not working properly. The clicks keeps happening even after I've turned all the noise settings to silent. It the Kodak EasyShare M341 Orchid 12.2MP Digital Camera with 3x Optical Zoom. Thank you so much!


This camera has an auto lens. Which means it will focus automaticly evey sec. you can turn this option off:\015\0121: Go into the menu\015\0122: Chose option Cam Setiings\015\0123: Swich AUTO focus to single lens and click OK. ... Kodak Easyshare M341 12.2MP Digital Camera with 3x Optical Zoom and 2.7-inch LCD

Camera turns off when try to zoom - Kodak EASYSHARE M763 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Kodak EASYSHARE M763 Digital Camera

Camera turns off when you zoom in - Kodak EasyShare M863 Digital Camera


Hi,This usually happens when the batteries are nearly dead or not good enough, i recommend Duracell alkaline batteries as they seem to last longer, also try not to use the flash when it's not needed as this will conserve battery power. ... Kodak EasyShare M863 Digital Camera

Camera won't turn on lens seem to be stuck - Kodak Easyshare M341 12.2MP Digital Camera with 3x Optical Zoom and 2.7-inch LCD


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Kodak Easyshare M341 12.2MP Digital Camera with 3x Optical Zoom and 2.7-inch LCD

My camera would not turn on - Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom


Assuming batteries are good, the problem is the system control board that controls the entire camera, and is a job for a camera technician. ... Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom

Cannot turn camera on - Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD


Check batteries first ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD

Wont stay turned on even with new battery - Kodak Easyshare Z612 6.1 MP Digital Camera with 12xOptical Zoom


Sounds like a trip to the shop. ... Kodak Easyshare Z612 6.1 MP Digital Camera with 12xOptical Zoom

Hello, I have a Kodak EasyShare M580 digital camera. 14 megapixal, 8 X zoom. It won't turn on, won't charge, and my computer won't recognize it when I connect it. Any suggestions? Thanks, Carol Cox [email protected]


... Kodak Easyshare M580 Digital Camera

When i zoom in it turns black - Kodak EasyShare V570 Digital Camera


Here are the steps: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a so ... Kodak EasyShare V570 Digital Camera

Makes noise when turned on - Kodak Easyshare M341 12.2MP Digital Camera with 3x Optical Zoom and 2.7-inch LCD


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Kodak Easyshare M341 12.2MP Digital Camera with 3x Optical Zoom and 2.7-inch LCD

ANSWER ME WHY DID NOT TURN ON? - Kodak EasyShare DX6340 Zoom Digital Camera


Have you tired replacing the batteries? ... Kodak EasyShare DX6340 Zoom Digital Camera

How do you turn the flash off? - Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom


Well you should go to the settings of ur camera and there is an option for turning on or off the flash that should do.thnx feel free to ask again. ... Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom

My camera, (Kodak EasyShare Zoom Digital) will turn on briefly and then shuts off. The lens will not extend out as thou it is stuck.


Hi,I have generally seen this problem, when the camera is dropped onto some height.Remove the battery for few minutes and again plug in. Check if that could fix the problem.You may be able to jar the mechanism back ... Digital Cameras

Problem with Kodak EasyShare CX7330 Digital Camera LCD screen is black-cannot take photosWhen I turn the camera on the LCD screen lights up with the Kodak easyshare screen then it goes black. I can take a picture with or without the flash and it is black


Hello, Sounds like a CCD failure, very costly to repair. ... Kodak EasyShare CX7330 Digital Camera

My kodak cx7430 digital camera wont turn on - Kodak EasyShare CX7430 Digital Camera


... Kodak EasyShare CX7430 Digital Camera

Kodak Zoom digital Camera Lens error 16 - Kodak EasyShare C763 Digital Camera


\012\012try these:-\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Kodak EasyShare C763 Digital Camera

My Kodak EasyShare C180 Digital camera, came with "Kodak" batteries after those died, I inserted new batteries, and now everytime I try to turn the camera on, it doesn't respond. I have tried Lithium batteries, and even re chargable batteries. Nothing seems to work. Does this camera need "Kodak" batteries to operate?


\015\012We recommend you to use Rechageble batteries with 2000 mAmp or higher alternatively AA non-rechargeable lithium batteries (Ni-Mh)\015\012\015\012Kodak Digital Imaging Support Centre can be contacted on any of the numbe ... Kodak EasyShare C180 Digital Camera

Kodak V803 Digital Zoom Camera turns off when I try to zoom.


The problem will more then likely be either a worn/broken gear or the gears have accumulated a bit of dust in them.\015\012If you send it back they should be able to do the reapir easlily enough, but price wise you will be at their mercy. ... Kodak V803 Digital Camera

I have a kodak easyshare V1003 .. my camera went dead with the lens out and when i got it charged the lens would not go down.. the camera does turn on and take pictures.. but the focus is blurry.. and it will not go down what do i do? is there something i can do to get the lens down so i can focus my pictures and when i try zooming in the camera turns off. please help


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare V1003 Digital Camera

My lens on my kodak easyshare m580 digital camera is stuck open and as extended as it could be. i've dropped it and that's what made it do this. i cant turn my camera on or off but when it gets turned on the inside of the camera makes a rough noise and the lens wont go back inside.


... HP Photosmart MZ67 Digital Camera

My KODAK Easyshare z740 Digital Camera turns on 2C


Fixing your problem could be as simple as cleaning the battery contacts\015\012in the camera, or the solution could be a lot more complex and\015\012expensive. Here's a link to the Kodak Help Center - it provides a\015\012simple Q&A format to ... Digital Cameras

Kodak m753 camera will not turn on - Kodak Easyshare M753 Digital Camera


Here are the steps for no power issues: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the batter ... Kodak Easyshare M753 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4504 seconds