Having problems with your Kodak EasyShare MD41 Digital Camera ?

I turn on the camera, the lens comes out, then immediately goes back in and the camera turns off

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare MD41 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help

You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

I turn on the camera, the lens comes out, then immediately goes back in and the camera turns off

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EasyShare MD41 Digital Camera

When I turn on the A730 the lens comes out and then immediately goes back in and lens error! appears and camera turns off

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... GE A730 Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat

It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur

... Olympus SP-550 UZ Digital Camera

Hi welcomejee, I read all your solutions regarding the digital camera Sony DSC N2. I really have to thank you for your precious Some of the problems are very similar to mine: After the camera fell on the ground from about 2 meters in off mode the lens would come out and immediately back in 4 times in a row. After that the lens is back in, a beeping sound comes up and on the display it is written to "Turn the power off and on again". Of course that does not help at all. The lens is opening

George, this is most likely a lens issue, and more precisely, probably a stripped gear when it fell. You will have to disassemble the entire unit to get at the lens assembly, and will probably be a professional by the time you get through! ... Digital Cameras

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!

I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

I have a Kodak digital camera M863. When I turn it on, the lens comes out and then immediately goes back in so I can't take a picture. We have replaced the battery. Any suggestions.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus FE-190 Digital Camera

When I turn on my Olympus C-5000 digital camera, the lens comes out but it immediately goes back in so that I cannot take any photographs.

So the camera was dropped, this often happens after being dropped or similar, basically the lens is extending out, but it encounters resistance, stops, and pulls itself back inside and turns the power off.\015\012\015\012\015\012Basically ... Olympus Camedia C-5000 Zoom Digital Camera

Olympus FE-230 - When I turn on the camera, the lens comes out goes back in them comes out again. Then I have a blurry image on the screen. I can hear the gears turning to extend the lens. This camera is about a year old and as far as I know has not been dropped.

Hey fl_dolphin,\015\012 This is most likely caused by something obstructing the movement of the lens. You could try blowing compressed air in to the side of the lens to try and dislodge whatever is stuck in the lens. ... Digital Cameras

Zoom my camera isnt an olympus FE - 230 digital camera, its a kodak M836, i can look at my pictures okay, but i cant take any, as when i turn it on to take a picture the lens goes out, and then back it and it switches off. it is nothing to do with the battery as i have charged it several times. - my dad thinks that it goes back in because there is some sand inside (as we recently went on a beach holiday) and that the sand is stopping the zoom from coming out all the way, so it goes back in, alth


I have a HP camera CW450t camera and cannot turn it on with the power button on top. I know the batteries are good because I can turn on the camera with the review button and review the pictures that I have taken. When the power button is pressed the green light on the back of the camera flashes but the lens does not come out and the led screen does not come on. when you take your finger off of the on/off button the green light goes off as well.

Had the EXACT same problem with the CW450 model. I called support because I was mad and wanted it replaced. The support tech helped me through the issue. The answer is- NiMH. Alkaline batteries are unstable and not powerful enough for use with this c ... HP Digital Cameras

Camera lens comes out and goes back in when I turn it on.

Sounds like the lens can't get into the proper position. Any possibility of damage to the lens? ... Olympus FE-110 Digital Camera

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

Camera Everytime I turn my camera on it comes on, but the lens goes in and out a few times before the screen goes completaly black and says to turn the camera off then back on again, I do, and the same thing happens all over again, not allowing me to take any pictures. However, I can still view the pictures that have been taken...and that are on my memory card.

It a lens misalignment try tapping the lens gently in an opposite direction the camera dropped on and that should pop the gear back into place ... Sony Cyber-shot DSC-W70 Digital Camera

Screen stays black when I turn my Olympus 800 on. The lens does come out, when I remove and put back the battery the camera the lens goes in and out and the camera works fine. I have to do this every time I turn the camera on. Can you help?

I've had cameras do that also. Not sure what the problem is, but it's going to need to be serviced to figure it out, it's not a setting problem, or something easy, and my problem was intermittent...so that made it even worse. Today's digital cam ... Digital Cameras

When i turn on my camera the lens trys to come out but then it gets stuck and goes back in; the screen says "turn the power off and on again" but when i do the same thing keeps happening over and over. The camera has one big rechargable battery so i can't just replace it. I've tried doing the reset, and I've tried tapping around the lens ad hitting the sides or bottom of the camera but nothing has worked.

Here is a very reasonably priced quote for repair; https://www.teleplancamerarepair.com/quote/cart.asp?iProbID=5&mo=358\0 ... Sony Cyber-Shot DSC-S40 Digital Camera

Samsung pl50 camera: It is fully charged and turns on and i can view pictures but i can not take photos the lens comes out and goes back in whilst it beeps. Sometimes the lens is stuck but after a wig

... Samsung L200 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... HP Photosmart M525 Digital Camera

Kodak Z700 Camer appears to be in a locked out mode. The lens is stuck partway out and does not retract if the camera is turned off. When turned back on The Green light comes on for approximately 5 seconds and then goes off. The viewing screen comes on for 2 to 3 seconds and goes out as well.

Hi,Tentative solution:I had the identical problem. I went as far as disassembling the camera ... not recommended.Instead of fussing with the lens cover, I pressed on the lens assembly (gently), the lens retracted and the ... Kodak EasyShare Z700 Digital Camera

The camera turns on finebut as soon as the lens comes out it automatically goes back in and repeats this for 2 to 3x before the screen goes white and it say "please turn camera off and then on again"

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FS5 Digital Camera

My ge a730 camera says lens error when i turn it on. the lens comes out then goes back in, then the camera turns itself off. it could have sand in it because we are at the beach. any suggestions? thanks, stacey

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... General Electric A730 Digital Camera

Panasonic DMC-FX3 turn lens come out but message please turn camera off and then on again. If you turn it off lens stayes out until you turn it on again then goes back in and out

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-FX3 Digital Camera

Lens error When camera is turned on the lens will come out and then right away goes back in-an error message says lens error restart camera

Did you try replacing batteries.will it turn on long enough to restore it?if this is a new camera send it back it could be a software issue or mechanical breakage.Also get a can of air and blow the lens off to ensure no debris is ho ... Canon Powershot SX110 IS Digital Camera 9.0MP

Lens error. lens comes out than back in turns off than on and goes back in and out than says lens error. this camera is only about 8 months old. i have a feeling if it were to get repaired some else will go wrong. doesn't seem like a reliable product very disappointed in nikon and most likely never will buy their products again.

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon Coolpix S210 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4702 seconds