Having problems with your Kodak EasyShare One Digital Camera ?

When i turn on my Kodak easyshare 8.2 the lens comes out the shutter opens and then immediately closes and the lens goes back in. what is wrong?


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare One Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i turn on my Kodak easyshare 8.2 the lens comes out the shutter opens and then immediately closes and the lens goes back in. what is wrong?


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Kodak EasyShare One Digital Camera

Lens Error I fell while holding my camera. The lens was open at the time and when I got up I turned the camera off. I then turned it back on to check it and the lens opened and immediately closed with the "lens error" on the screen. I can turn it off and on and the lens will always open but closes as soon as it has opened with the lens error on the screen. The shutter opens but closes also, like the lens. Can this be fixed? It was a gift so I don't have the bill of sale but I still have the orig


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX L4 Digital Camera

LENS PROBLEM Lens keeps zooming in and out when I turn it on. After 4 times, the lens goes back in and it says on the screen, "Turn the power off and on again". Then it does the same thing when I turn it off and back on. Also, the shutter is not closing however it's also not all the way open. Almost half way but more open than closed. Please help!!!


The slightly open shutter is the reason for this problem. Thank God you mentioned it. \015\012Solution: Try with your fingers to shift the shutter “blades” back and forth to see if they move freely. If they do no move freely it maen ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!


I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

Kodak V530 Kodak easyshare V530 camera turns on then straight back off again bought a new battery but still does the same. Lens goes out a bit but then straight back again.


Same problem, have an M883 although this seems to be an issue with older models as well.  Something defective I am assuming.  I have taken proper care of my camera (storing it in the case, ensuring no liquid touches it, etc.) I plan to call ... Kodak EasyShare V530 Digital Camera

KODAK M853 i have the light pink kodak easyshare m853 camera and i just used it to take field day pictures like a week ago and then used it again two days ago and it worked fine. but tonight i turned it on and my screen was all redish, purpleish and had a huge blur in the middle of the screen. i can't figure out what's wrong with it. the lens have no dirt,smuges, or anything on it. i think its the interier lens, but i still am on warrinty and can take it back, but i only have the receit and box,


Hey i just took mine apart and i found out how to fix it. okay frist you need to take the front and back covers off then be very careful and theres a screw at the bottem of the plasma screen then unclip the top and the right side then slowly pull it ... Kodak EasyShare M853 Digital Camera

Ok so i have a kodak easyshare CD82 and everytime i try to turn it on the lense will keep going half way out then halfway back in and te screen will flash either lens error 111, lens error211, or lens error 315 and shut off. ive only had this camera for a month so whats wrong with it and how do i fix it?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Kodak Easyshare CD82 Digital Camera

I have a Kodak EasyShare M753 camera. When I power it on, it is displayed on the screen :"Lens error 122.1.0.0". The lens tries to go out a bit then immediately returns but to the closed position. I need help please. Many thanks in advance.


Try these procedures. ... Kodak Easyshare M753 Digital Camera

When i turn my camera on it goes to a white screen and says lens error 111,0,0,0 then turns to black screen and says lens error 221,0,0,0...wuts wrong? i have a kodak easyshare c813, 8.2 mega pixels, 3x optical zoom if that helps at all


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak Easyshare C813 Digital Camera

My Kodak EasyShare M340 immediately shuts off when I turn it on. I thought it was the charger and purchased a seperate charger for the battery - same result - I power it on and it immediately shuts down and closes the shutter. Any ideas on what to do next? Thanks, Matt Dare


... Kodak EASYSHARE M340 Digital Camera

Help! Kodak Easyshare M1093 IS will not stay on. Powers up, lens pops out, that immediately powers down, lens closes and shuts off. Don't gt it! It's drivinv me nuts!


... Kodak EasyShare M1093 IS Digital Camera

Need help! I was dumping my pics on my computer it's a kodak easyshare, and after it synced i unplugged it and the lens is still stuck out and i can't get it to close or turn on or off. it just makes a tiny blip noise when i hit the on/off button. i took the batteries out all day and just put them back in and the lens is still pushed all the way out! How do I fix it????


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EasyShare One Digital Camera

My kodak easyshare 10.2 megapixel camera when turned on, attempts to turn on by opening the lens, but then immediately closes. I have tried just about everything, can you help?


Stuck lenses are probably the most common \015\012reason that compact digital cameras get thrown away, but there's a fair \015\012chance of recovering use of your camera againThe fault is \015\012commonly caused by dirt or gri ... Kodak EASYSHARE M340 Digital Camera

I have a black kodak easyshare m340 and whenever i turn it on the lens comes out goes back on and the whole camera just turns off. What do i do?


Make sure your batteries are charged up, or new ones are installed. This is a very common problem. ... Kodak EASYSHARE M340 Digital Camera

As soon as i turn it on it immediately turns off again, what can this be? the lens comes out and goes back to the initial position, please help me? Kodak M1063


Your battery could be bust and needs to be replaced ... Kodak EASYSHARE M1063 Digital Camera

As soon as i turn it on it immediately turns off again, what can this be? the lens comes out and goes back to the initial position, please help me, its a kodak easysharev1253 hd


Your problem is likely due to weak/worn out batteries or corrosion on the battery contacts inside the camera which can\015\012prevent the full power of the batteries from\015\012flowing into the camera.\015\012Try this free fix before you do anything ... Kodak EASYSHARE M1063 Digital Camera

I have a Kodak digital camera M863. When I turn it on, the lens comes out and then immediately goes back in so I can't take a picture. We have replaced the battery. Any suggestions.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus FE-190 Digital Camera

The lens of the Kodak Easyshare C913 camera was out when I dropped it. It won't go back in now. It is stuck and when I press 'on' the screen alights for a second and goes blank. I can't take any pictures


Im sorry to know about what happen on your camera., base on the statement tahtyou haved it means your camera needs of service., Please call kodak Toll free 1 800 235 6325 For. U.S and canada support. if outside U.S yu can visit kodak.com and click fo ... Kodak EasyShare C913 Digital Camera

Hello, I have a Kodak EasyShare z740 camera, and a couple of days ago I was using it and it was fine. I tried to turn it back on today, and the light on the dial is orange, not green. The lens comes out, but then the camera turns off. I tried new batteries, I tried rechargeable and regular, and I have no idea whats wrong! Please help!


For this problem try the following: * Try removing the memory and the battery * Try using the camera w/o the memory card * If problem still persist call the Tech Number1800 235 6325 op 12 op 2H ... Kodak EasyShare Z740 Digital Camera

My ex Z1000 wont take pictures. i turn the camera on the lens goes in and out some times it looks like its going to let me take a picture and then the lens closes back into the camera and the screen goes black. It looks like the cameras off but I push the play button on top and it lets me view pictures. I don't think its the lens because the lens seems to open and close fine. Ive only used this camera 3 times and it has been stored safely so Im not sure what happened. It will only let me get int


Your camera problem has the problem chance. Fisrt you should try with full charge battery. sometime weak battery cause also. Second main pcb does not resetting every time after taking picture.\012I hope you luck! \012Would you give more detail pr ... Digital Cameras

HELP! dropped camera, lens won't go back in, shutter won't close


The following blog outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/ ... Canon PowerShot A95 Digital Camera

HELP! dropped camera, lens won't go back in, shutter won't close


Tapp the lense GENTLY in the opposite direction of the misalignment ... Kodak EasyShare DX6490 Digital Camera

HELP! dropped camera, lens won't go back in, shutter won't close


... Digital Cameras

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur


... Olympus SP-550 UZ Digital Camera

I have a Kodak M1063 that has never been dropped or abused. I have had it for a couple of years and it has worked flawless. A couple of weeks ago it started malfunctioning as it would open the shutter and then close it immediately. I thought that maybe it was time for a new battery and I bought one and charged it. The camera still does the same thing. It powers up...opens the shutter then close Immediately. please advise


This sounds like a stuck lens. Here is a good blog about things to try to fix it:http://camerarepair.blogspot.com/ ... Kodak EASYSHARE M1063 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3485 seconds