Having problems with your Kodak EasyShare One Digital Camera ?

Cameras when i plug in my kodak c713 camera into my computer, i can't turn on the camera like my guide tells me to (i think you need to turn it on to transfer the pictures)

Answers :

Does your camera turn on if you don't connect it to the computer?
\015\012once you have turned it on, connect the cable.
\015\012make sure that you are using nimh batteries in the camera.
\015\012don't use alkaline because digital cameas need more power to turn the camera on. therefore, if you use alkaline batteries, it will get drained easily.
Repair Help & Product Troubleshooting for Kodak EasyShare One Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cameras when i plug in my kodak c713 camera into my computer, i can't turn on the camera like my guide tells me to (i think you need to turn it on to transfer the pictures)

Does your camera turn on if you don't connect it to the computer?\015\012\015\012once you have turned it on, connect the cable. \015\012make sure that you are using nimh batteries in the camera. \015\012\015\012don't us ... Kodak EasyShare One Digital Camera

I'm ready to download my pictures from the camera to my computer, but I don't know how to do it. I Installed the software, then it said to return to the getting started guide, which I did. Only, the book doesn't tell me what to do. It shows a picture with the USB cable and where to plug it in on the camera. I turned the page and it says congratulations for transferring the pictures to the computer. It doesn't say how to do it. What shall I do?

What is the make and model number of your camera? Let me know and I will be able to help you.\015\012\015\012cheers ... Digital Cameras

Same here whenever i turn it on, it says access and won't allow me to take pictures...then when i keep pressing menu, it tells me to "turn on and off the power", i did and it does not work...i also tried to look in the user guide...found a similar diagnosis but i fallowed the steps but its still not work. I NEED HELP...i can't afford to buy a new camera T-T

Does the lens move while saying Access? If so, the focus is stuck. If not, the lens is stuck. Both are hardware problems and I'm afraid you will have to give the camera away for a repair. You can contact your local Sony service center or other local ... Sony Cyber-shot DSC-W30 Digital Camera

I have a nikon d5100. the problem is, the camera accidently fall off and i think i had broken something inside. i tried to capture picture but cannot. the screen shows that something happen to the autoexposure.so, i just able to see pictures before the incident and cannot use for photography. can u help me by telling me what i need to do and guide me to overcome the problem? thanks -Izzati, Malaysia

This is not a DIY job, you need to take your camera to a Nikon camera service center for repairs. ... Nikon D5100 Digital SLR Camera With 18-55mm Lens

I am having a problem tranferring pictures from my Z1485 IS camera which is brand new. When I connect the transfer cable and then turn on camera to transfer, the camera turns on as indicated by the on light, but the lens does not open and camera does not function. I am using this camera with XP Pro. Please help, my grandson was born yesterday and I would like to send pictures out. Thansk

There are two things,, you are either want to transfer the digital camera pictures from you camera, and other is you want to connect you camera to pc and want to shoot live,for transfering,, generally with common drivers ,, once you conne ... Kodak EASYSHARE Z1485 IS Digital Camera

My ex Z1000 wont take pictures. i turn the camera on the lens goes in and out some times it looks like its going to let me take a picture and then the lens closes back into the camera and the screen goes black. It looks like the cameras off but I push the play button on top and it lets me view pictures. I don't think its the lens because the lens seems to open and close fine. Ive only used this camera 3 times and it has been stored safely so Im not sure what happened. It will only let me get int

Your camera problem has the problem chance. Fisrt you should try with full charge battery. sometime weak battery cause also. Second main pcb does not resetting every time after taking picture.\012I hope you luck! \012Would you give more detail pr ... Digital Cameras

I have a HP M525 camera, Seerial No. CNGBUQ30Z4. Recently, when trying to transfer some up-loaded picturs (from the camera to the computer)the screen went blank. When I tried to restart the process by clicking on the icond on the desktop, it would not open and turn on the Photosmart part of the program. And, now, I an not able to transfer the new pictures from the camera to the computer so that I can process them like put then in a Word file, etc. What should, can I do to resolve this proble

Hi,\015\012The possible solution's are \015\0121 . First uninstall the photosmart software from the system and reinstall the software once again . Install in C: drive and then connect usb and transfer photos this will work . If this doesn ... Digital Cameras

Frozen Camera I have a Panasonic Lumix TZ3 digital camera. The last time it worked, the screen went checkered, so i turned it off. But upon turning it off, the lens of the camera stayed out like it was taking a picture. Now it won't turn on. I've tried recharging the battery, changing memory cards, no memory card, switching settings and turning the on/off switch. Is there anything to be done or I do I just need to get a new camera?

Try letting it drop about 4 tto 6 inches on a hard service covered by a paper towel. Don't let it land on lens of course. You can remove the mem card. It has 13Meg of internal. ... Panasonic Lumix DMC-TZ3 Digital Camera

My digital camera has a message said as following: Internal memory is full. So I think I need to delect all pictures from camera, is that right? I already import all pictures from camera to my computer. So now how i can delect all pictures from my camera. Plase tell me how. Thanks.

Internal memory can indeed be full. I would suggest however to purchase a memory card for this camera, which will give you quite a bit more memory than what is available internally. ... Kodak EasyShare M1033 Digital Camera

When I turn the camera on, the canon logo appears on the display and the red light in back above the menu button keeps blinking, but nothing happens. When I turn it on in the "taking pictures" mode or "view pictures" mode, it just hangs and acts like it has trouble reading the CF card. I've tried multiple cards and had the same problem, so I think it's the camera and not the cards. Any ideas?

Canon logo is starting of camara indications just as company manuals ... Canon PowerShot S1 IS Digital Camera

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp

There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len

Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.

... Canon PowerShot SX110 IS Digital Camera

Nikon L18 camera worked good until I upgraded to vista32. I cann't upload pictures from the camera to the computer. the camera gives a quick beep when turn on, and when click on the nikon transfer button it switch to stop transfer. I would like to know if the problem could be a bad cable.

Have you tried taking the memory card out of it and installing it into your computer slot to transfer the photos? ... Nikon COOLPIX L18 Digital Camera

I turned on my cam to see the camera making everything look distorted on the screen and distorted when I actually take a picture. Every other function works fine (like the menu screens etc.) so it's not a screen problem so it might be a lens problem or something. Can somebody please tell me what's wrong? My camera is a Sony Cyber-Shot DSC-T3 if it helps. http://yfrog.com/0idsc03740sej Here's a picture of my laptop taken with this camera :( Thanks in advance

I'm afraid your camera is affected by the well known Sony CCD sensor problem - a large number of CCD chips manufactured by Sony between 2002 and 2004 were pron ... Sony Cyber-Shot DSC-T3 Digital Camera

I can see the pictures I've taken on the camera just fine, but when I turn my camera on to take a new picture, I cannot see all of the scene because 1/2 of it is blocked by a black portion, so I guess you are telling me, I have bad CCD sensor. I need to check and see when I bought my camera at walmart and see if it is still under warrenty. Thanks!!

Hi,Let me know model number and brand of your camera to understand why its giving you half correct picture and rest is black.Thanks. ... Digital Cameras

I need to know how to reset the resolution setting on my Fujifilm Digital Camera FinePix S5700/FinePix S700? Can you help me get the best quality? It isn't blurry, but I think it could be better. Maybe, I can't get any better than the settings I have already. What should my settings be to get the best quality pictures from this camera? Can anyone tell me, Please? Thank You, Vickie My pictures look perfect in the view finder, but come out on the computer as grainy.....also, my S setting does not

You can try checking the user manual for those settings this is the link for that http://www.fujifilm.com/products/digital_ ... Fuji FinePix S5700 Digital Camera

My camera won't turn on but it'll let me view all my pictures just fine. I think their might be a problem with the shutter because it sticks out a bit. When I try to turn my camera on it'll show the FujiFilm Welcome Screen and then just go to a black screen. If there is anyone who knows how to fix this without taking it to get fixed professionally please tell me, i would be very grateful of that! If not, and you know where they can fix it (other then sending it back to the company) please inform

This is a very common problem. It may need firmware upgraded. The manufacture will do it for $50 or you may be able to find a software update on the web. ... Canon PowerShot A620 Digital Camera

Lcd problems When I turn the camera on, the screen is very dark. I have tried all the settings on the camera to make it brighter but that hasn't worked. I am still able to take pictures and when I transfer them to the computer, they come out normal. I noticed earlier that the screen went brighter for a second and then turned dark again. I think there may be a problem with connection.

Hey amb151,\015\012 From how you describe the problem it sounds like you probably do have a connection problem, but the only way to really know is to have the camera looked at by an authorized service technician such as bringing the cam ... Kodak V803 Digital Camera

Sony camera turns on but screen is just bright white, can't see the images I'm taking or the menu. I can press the menu buttons and can tell that the buttons work because I hear the beeping noise. But I can't see anything. I also try to take pictures and I don't think it is taking any pictures because when I plug the camera into the computer nothing new shows up on the memory stick.

Check the contrast setting make it default or 50/50 ... Sony Cyber-Shot DSC-S40 Digital Camera

Nikon Coolpix s220...Lens Error. Camera was dropped from like 5 inches. Immediately received the error message screen. The lens is stuck all the way out...I have tried to do some of the above and while twisting the lens slightly got it to take pictures again, I think it may have done more damage because its still makes a buzzing noise when I turn it on and there is black on a portion of the screen like the cover is partially stuck (inside the camera).

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix 2200 Digital Camera

Sharp VE-CG40 I bought this camera off ebay. I do not have any software for it. I cannot get it to transfer pictures to my computer. I think i need to install a driver. It is a Sharp 3x Optical Zoom Digital Still Camera VE-CG40. Where can I download a driver? Hell I have the camera model sharp Digita till camera the model is VE-CG40U. I bought this but i don't have the software would you please send for me the software thank you very much.

... Sharp VE-CG40U Digital Camera

Transfering pictures I dont have a memory card yet, so my pictures are saved to the camera's memory. I use the plug to transfer my pictures to my computer. I plug in the camera, then turn it on. The lense usually comes out and something pops up on my screen of my computer that asks me if i want to transfer my pictures to a folder on my computer, but now the lense doesnt go out when i turn it on while it is plugged in...and on my computer it says that the pictures are being transfered and then it

You must start the Explorer (windows key + e key).\015\012You should see your camera on the left.\015\012Right click on it.\015\012Click on properties.\015\012Click on Test Camera.\015\012Click on Set time (in order to s ... Nikon COOLPIX P4 Digital Camera

Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail

Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

I can't transfer my pics from lumix lx3 to pc. When I first connect camera to pc via usb cable, a new drive pops up and I can initially see my pics. Then things lock up and my pc tells me that it can't read from the drive and my camera won't turn off (unless I remove battery). Is this a common problem? The camera and sandisk sdhc 4gb are brand new. I'd rather not need depend on a card reader. Any help?

Stubbornly refusing to use a card reader means you'll probably never see your pictures again. Pros never use their cameras for downloads...they always use a card reader...it's faster and completely trouble-free. ... Vivitar ViviCam X327 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5967 seconds