Having problems with your Kodak EasyShare P850 Digital Camera ?

Keeps shutting off and turning back on by itself when the power is turned on. lens keeps retracting and then goes back out.

Answers :

Try using a liquid contact cleaner. I read about this fix on another site, worked great for me.
A product called DeoxIT in the U.S. is what was suggested, I am in Canada and can't get that here so I picked up a product from a company called NexxTech. Just a liquid contact cleaner.
Take out the battery of the camera. Put a few small drops of the contact cleaner on the power button and let it drip down into the switch. Rotate the on/off switch back and forth 5-10 times, put the battery back in and Voila! Fixed!
No more random on/off irritations, camera works just like it did before the problem started a few weeks ago.
It worked great for me.
Good Luck!
Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare P850 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Keeps shutting off and turning back on by itself when the power is turned on. lens keeps retracting and then goes back out.

Try using a liquid contact cleaner. I read about this fix on another site, worked great for me. A product called DeoxIT in the U.S. is what was suggested, I am in Canada and can't get that here so I picked up a product from a compan ... Kodak EasyShare P850 Digital Camera

Canon PowerShot S45 lens is retracted out and lens cover won't open or shut. camera cannot operate. Powers up, E18 shows on blank viewfinder, beeps 3 times and goes back to blank viewfinder. Shift lens cover back, sounds like it's opening/closing, but nothing happens other than the above.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot S45 Digital Camera

Same Problem When I hit the power button, it flashes, the HP logo comes up on the screen the lense retracts and comes back out and the power goes off. That's all it will do. Other times when I turn it on, a little yellow light on the bottom left side in the back flashes once after the blue power light flashes three times and then turns back off. Arggggghhh!

Use never used batries i have the camra it work s better with new batries ... HP Photosmart M525 Digital Camera

Power issues. Just recently I've encountered a problem with my camera. After plugging it into my computer (And not noticing the power surge notification on the desktop while doing so). It locked up and powered itself off. I tried turning it back on, and it turned on for a split second then shut off without retracting the lense. I switched batteries and it retracted the lense, but I tried powering it on and the lense only came halfway out and it powered off. I've tried 4 fresh sets of batteries a

You sdaid power surge on the laptop.\015\012Thus suggests that this may have affected the camrera.\015\012I would think a 'repair' if such is possible will be near the cost of replacement.\015\012Only Olympus can advise ... Olympus FE-115 Digital Camera

When I power up the camera the lens opens and immediately retracts and the camera shuts off. I've attempted to push every button while turning on the camera to no avail. I also held onto the lens when it opened. Though the lens remained extended, the camera powered off. When I turned it back on the lens retracted and the camera powered off.

Have you made sure that the batteries are LiIon and fully charged? I had a similar problem with a Kodak Easyshare camera that required the higher voltage LiIon battery pack rather than alkaline AAs which will fit in there but is not exactly right. ... Kodak EASYSHARE M763 Digital Camera

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help

You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b

... Canon EOS 40D Digital Camera

Powers off my canon powershot sd600 digital camera keeps powering off after about 30 seconds. I have gotten a new battery and that didn't help. On the left hand side before it shuts down it has the letter and numbers E18 on the bottom. The zoom lens is also sticking out and will not retract. There are no error messages on the camera at all. If anyone has a solution please let me know. Thanks!

E18 is a lens error message, the lens is stuck or bent, and wouldn't come out, that's why camera shuts off after it tries to do so at the start, not much you can do, but replace the whole lens assembly ... Canon PowerShot SD600 Digital Camera

My canon TX1 is about two years old. I recently went to use it and its not working properly. I can put it in play back mode manual mode or scn mode. As soon as I turn it to auto which I normally use the screen goes black and the power goes off although the lens does not retract. The battery is fully charged. Any suggestions?

... Canon PowerShot TX1 Digital Camera

I have a cannon camera, my boyfriend dropped it with the lens extended and now whenever I try to turn it on I get a message saying that there is a lens error and the camera will shut down. I have tried a couple of answers on this website, but most have to do with a lens that is stuck out, mine will still retract back and forth if you smack it on your hand. My problem is when you power it off and back on the error shows up and the lens will not extend then. Any suggestions are greatly appreciate

... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

When i turn the power on the lens comes out and goes back in two times and then the screen says turn the power off and on again. keeps doing the same thing

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras

My Panasonic Lumix DMC FS3 is not powering on fully.... When I switch the camera to the on position the green light blinks on and then off and the lens opens but the screen doesnt seem to power on. When I shut the camera in the OFF position, the green light blinks on then off and the lens retracts back into the OFF position. Can I trouble shoot this or do I have to take to a repair shop? Is this camera even worth getting repaired

See if the memory card cover had been open in that moment .However if the problem persist the camera must go to the repair shop. The syscom and associates circuit has faulty .God bless you ... Digital Cameras

The zoom lense will not retract back in, and i cannot take pictures. all i get when i turn the power button on is a black screen and the camera goes back off. it will only let me look at pictures i've taken, not take pictures.

Lens unit is failed,if u want to do fix yourselves dis assemble the camera, take out lens unit disassemble and replace the broken parts assemble to take picture. ... Olympus Stylus 7010 Digital Camera

Turn power on lense comes out and goes back in then back out and camera then shuts off

... Pentax Optio T30 Digital Camera

LENS PROBLEM Lens keeps zooming in and out when I turn it on. After 4 times, the lens goes back in and it says on the screen, "Turn the power off and on again". Then it does the same thing when I turn it off and back on. Also, the shutter is not closing however it's also not all the way open. Almost half way but more open than closed. Please help!!!

The slightly open shutter is the reason for this problem. Thank God you mentioned it. \015\012Solution: Try with your fingers to shift the shutter “blades” back and forth to see if they move freely. If they do no move freely it maen ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

My camera all of a sudden will turn on randomly. when i hit the off button, it won't shut off. i have to end up taking out the batteries to shut it off, but the lens won't retract. when i put the batteries back in, it won't turn on when i push the button, it just keeps going on automatically. what's wrong?

As I understand, you had a software lag, you have not waited the end have taken out batteries. Now you should reboot the camera, or to address in the service centre.ht ... Canon PowerShot A530 Digital Camera

My sony digital camera won't fully turn on. when you push power the screen stays black but it says access and the lenses repetitively goes in and out with a 3 second pause between. then finally it stops and says to turn the camera off then back one. but this keeps occuring and it won't fully turn on. HELP!

There is some problem with your sensor in lens so only you are getting this problem .......so better check the sensor..... ... Digital Cameras

Vivicam3705 new batteries several times. camera comes on when power is pressed when batteries are 1st put in. then goes to setup time/date screen, complete that and vivitar shutdown screen comes up and camera shuts down and can not get it back on. please help me

BUY A CASE OF BATTERIES, YOU WILL NEED THEM\015\012 ... Vivitar ViviCam 3705 Digital Camera

When i turn on my camera the lens trys to come out but then it gets stuck and goes back in; the screen says "turn the power off and on again" but when i do the same thing keeps happening over and over. The camera has one big rechargable battery so i can't just replace it. I've tried doing the reset, and I've tried tapping around the lens ad hitting the sides or bottom of the camera but nothing has worked.

Here is a very reasonably priced quote for repair; https://www.teleplancamerarepair.com/quote/cart.asp?iProbID=5&mo=358\0 ... Sony Cyber-Shot DSC-S40 Digital Camera

The lens on my camera won't go all the way back in, it just keeps going in and out, and my camera won't turn on.. when i press the power button the lens just goes in and out and then stops in the middle

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus FE-340 Digital Camera

When turning on my sony dsc- w55 camera, the lens retracts and goes back in. screen says "turn the power off and on again"

Turn on gently hold end of lense and pull and twist gently you may here a click but dont force it \015\012turn off and on again and it should be fine\015\012hope this helpps ... Digital Cameras

Lens extends after power, then buzzes, then goes back in and shuts off. It was working not too long ago. And I haven't dropped it. But I just tried to use it and it doesn't want to work. The battery seems to be fully charged. So I don not know the problem.

Go to this website: camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera\015\012\015\012I couldn't fix my Pentax Optio S10, but this is the best web site I found to address the problem we both have with lens extending, bu ... Pentax Optio S7 Digital Camera

Canon I have a fairly new 1 1/2 year old canon power shot A530. It keeps saying the batteries are low even with new ones in it. It says to change them then shuts off. If I turn it back on it may be ok for a short time then says they are low again. Any suggestions?

You need to power it with rechargable batteries. with the MAH being no less than 2000. I bought a charger which came with 2batteries for less than a tenner ... Digital Cameras

My camera will power on for a second and the lens will come out then goes back in and shuts off..

Here's what worked for me (eventually):\015\012\015\012Tried the cleaining to no avail.\015\012Made sure the charger was Ok - it was\015\012Tried a new battery in camera shop that ... Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7784 seconds