Having problems with your Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom ?

In replacing a LCD screen on my Kodak V1233 I touched the metal of the LCD screen on the camera's circuit board and it sparked. The camera now does not power on. Have I fried the circuit board and what are my options?


Answers :

I think that's a safe bet that the circuit board is damaged.
\015\012I would see if it is repairable through kodak.com's website:
\015\012
\015\012http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198
\015\012
\015\012The above link is the troubleshooting and then repair website for kodak products.
Repair Help & Product Troubleshooting for Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

In replacing a LCD screen on my Kodak V1233 I touched the metal of the LCD screen on the camera's circuit board and it sparked. The camera now does not power on. Have I fried the circuit board and what are my options?


I think that's a safe bet that the circuit board is damaged.\015\012I would see if it is repairable through kodak.com's website:\015\012\015\012 ... Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom

The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem


Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera

Vtech Kidizoom camera - no longer turns on. It's less than a year old but past the 90 day warranty. I opened it up to look for the obvious (disconnected wires, cracked circuit board or toasted components but didn't notice anything out of the ordinary) I checked the voltage at the power terminals on the circuit board and got good readings.probably some internal componant that fryed - I may spend some more time with it later (when i have time) - but it'll probably just end up in the trash....


Before you trash, what could turn out to be a fully functional cam, try this. Take a large ziplock bag and fill it halfway with "uncooked rice" not the minute rice stuff, the regular rice. Take the battery out. Place the cam and battery both in the b ... Vtech Kidizoom Digital Camera

Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it fixable? I bought the Canon PowerShot A570 IS. I don't know if it is me or the camera but my LCD screen doesn't stay on. I can take a phote, the photo will then display on the LCD for 2 seconds BUT then the LCD goes blank, all i can see are the menu options. If I take a pic while LCD is blank my pic's


The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. ... Canon PowerShot A570 IS Digital Camera

LCD screen The lcd screen on my C633 is messed up, and seemed needing replacement, what are my easiest options? or what ae my options?


Get in touch with Kodak. They will tell you where to send the camera to have the LCD screen replaced. \015\012\015\012\015\012Jerry G. ... Kodak EasyShare C643 Digital Camera

Lcd screen the screen illuminates,but it doesn't display anything. I have a canon powershot SD110 digital elph.  When I turn the camera on the lcd lens illuminates but does not display images.  I cannot take new pictures but can view previous one.  Menu options occurs on the screen and can be changed.  I have misplaced my information booklet and do not know what to do to troubleshoot this problem and if it can be fixed.


Cannot get images deleted  ... HP PhotoSmart M437 Digital Camera

The lcd screen on my camera cracked, and it had a dark spot on it. I bought a new screen to replace it. I replaced it, but the only thing that happens its the the camera lens opens and everything stops. The lcd screen doesn't come on, and the camera wont power off. is there something that i am doing wrong, or that I need to do to get this to work? thanks, Lavoia


Maybe you installed the LCD screen wrongly and it doesn't respond if not properly installed. ... Digital Cameras

A Canon A570IS will power on and and everything works with external power (3.5-3.7V, 2A. 3rd party) but is dead with batteries (two fresh alkaline or NIMH AAs). I have used parts (from junk 570s) and have replaced the main board, button board, flexicable that includes on/off switch & shutter, leds, etc.. Again, lens, flash, storage, LCD, etc. work with external power, but not with batteries. I am at a loss. Any suggestions?


Since the external power works, we need to know, first off, if the battery terminals have continuity with the external power supply contacts. That will tell us an important part of this puzzle. The one hard thing about this problem, is that what ... Canon PowerShot A570 IS Digital Camera

LCD screen Why is the LCD screen black? It is showing that it has power but the screen is totally black. I charged it and still nothing. Thanks


Sir, this is CCD problum u replace ur ccd ... Sony Cyber-shot DSC-W55 Digital Camera

Blank LCD My sony DSC T5 camera LCD display is blank. When the slider is pushed the green LED is on but screen is blank. When you try to power off the camera it does not power off, the LED remains on. Removing the battery power it off. Any guesses I am very handy at reparing electronics.


Camera of this type are not usually repairable. No Parts.Like toasters/ kettles etc they are considered 'disposable'But don't take my word for it - check out the makers support page ... Sony Cyber-Shot DSC-T5 Digital Camera

I replaced my LCD Screen on my Canon SD450. The camera would start up, but the screen wouldn't show properly, now the camera won't power up at all. The power cable for the screen is bent from trying to get the connector seated properly.


Might have broken/shorted a trace in the ribbon cable that supplies the LCD with data, use a continuity tester on all traces to see if you have an open or short. Use the alligator clips of a multimeter to grab 2 sewing pins to use as probes as the tr ... Canon Digital Cameras

I have a new Canon T1i . I cannot figure out how to use the LCD screen to take a picture, like I would on a normal digital camera. I can preview w/ the LCD and see Menu options, but am unable to look at the LCD screen and take a photo.


Set the shooting mode to a Creative Zone mode. Press the LiveView button (northwest of the round multiselector). The LiveView image will appear on the monitor.For full details, see the "Live View Shooting" chapter in the manual. ... Canon EOS 500D / Digital Rebel T1i Digital Camera

On my GE E1050TW digital camera, when i start it up, it has a list of options such as '640x480p NTSC 4:3' and '720x576p PAL 16:9'. When i choose one of these options, another screen comes up with three options, 'YCbCr444', 'YCbCr422' and 'RGB444'. The first two are shaded grey and the last one is the only one i can click. when i do, the screen goes blank but the power light stays on. What ever i do, i cannot do anything to make my camera work. Is there a way of resetting it or something to make


These are output settings for when you want to connect the camera to a tv. If you were connected to a tv, when your screen goes blank, the picture would appear on the tv screen. ... General Electric Digital Cameras

Canon Power Shot S1IS 10x optical zoom 3.2 mega pixels: I turn the camera on and cannot view any subject images either through the viewfinder or LCD screen. The cap is off and the LCD screen and viewfinder are completely black. The display information works fine.


Hi,\015\012Your Canon S1IS camera has defect in CCD Sensor and Canon will repair it Free Of Cost. For details, please click ... Canon Digital Cameras

When switched on, the screen goes straight to CARD SETUP highlighting POWER OFF, with the option FORMAT.If FORMAT is selected, a CARD ERROR screen is displayed, after the CAUTION ERASING ALL message. The only option left is to switch off the camera.


This normally means that you have a faulty xD memory card.With the power off, remove the card and try cleaning the contacts using a cotton bud (Q-Tip) moistened with a little rubbing alcohol. This is unlikely to solve your problem but cos ... Olympus SP-510 UZ Digital Camera

I have a nikon coolpix L10. everything seems to work except the lcd screen. It is blank. Nothing happens. Power comes on and all other things make the sound of working properly but cannot see anything on the lcd screen


... Nikon COOLPIX L10 Digital Camera

I reset my DSC-2T00 by removing battery and pressing power button for 1 min. My LCD screen still does not show anything; however, when I click the button to take picture camera does flashes. But the LCD screen does not show anything again. Any help would appreciate???


No back lite ... Sony Cybershot DSC-T200 Digital Camera

Sony Alpha DSLR-A300 LCD screen does not power up as if there is no power going to the screen. the camera takes fine pictures. to view the pictures, you will have to plug the camera into a computer.


It is for sure that the LCD display is not working. Hence you need to probe into the camera to confirm but attempt only if equipped with the right tools and some experience , becasue as of now your camera can shoot good pictures and you must not end ... Sony Alpha DSLR-A300 Digital Camera

I have an Olypus FE-230 Digital Camera, and I was trying to upload photos to my computer. This wasn't working, so I ejected it, but instead of ejecting I was told the device was improperly removed (though I hadn't disconnected it at all). Now when I turn it on I only get a screen with two options: Power Off or Reset. I've only clicked Power Off, but I can't get anything other than this screen. The battery was running low so i've charged it. It isn't fully charged, but should be at least half-way


Do the reset. ... Olympus FE-230 Digital Camera

I have just got back from holiday where I took 325pics. Earlier today I was able to see them on screen but had not yet downloaded as I was going to take to a store to print out tomorrow. Now when I switch the camera on it gives me 2 options - Card Setup either power off or format. I don't want to press yes and delete the pics but if I press no the only other option it takes me back to is to power off. At this time i can't take any photos either. Camera - Olympus C-480 zoom with an XD Pictur


Whatever you do DO NOT FORMAT the card. Take it in to a CAMERA shop, not walmart or drugstore, They can probably remove the card and print from that. Sounds likeyour card is full. They can then put all your pics on a CD and you can then reformat th ... Digital Cameras

I have just bought a new memory card for my Olympus D 390 camera, when i put the card in the camera it goes to a screen saying card set up, then gives the options of power off or Foemat. When i choose format it askes , format yes or no, if i choose yes it then says card error, if i choose the no option it goes back to the maun set up screen again.the memory card that i am trying to put in is a 1 gig memory card, is that to big or do i have to get an upgrade from somewhere to allow the camera to


You need at least a 4 gb for it to read.. i just did mine too.. they are on sale right now at Target for $ 14.99, try this and let me know if this helped you good luk. tiffany in chattanooga tennessee ... Olympus Camedia D-390 Digital Camera

The LCD screen is all black even if the power is on. I can review pictures but I cannot take pictures because I do see anything in the LCD screen (all black)


Sounds like the ccd (imaging chip) in your camera is dead and would need replacing ... Sony Cyber-Shot DSC-T1 Digital Camera

Is there way to check the powering up circuit(s) for Canon SD550? I opened the camera to replace the broken LCD and now it is not powering up. Wondering if the circuit is broken and if it can be identified and fixed. If so how?


HeyMost likely something is not connected properly on the canon, maybe a cable is lose or similar.Of course you can use a multimeter and measure the voltage inside the camera, but I think that would be very diffic ... Digital Cameras

I have a Moultrie D-40 with problems. It has a bad display. It also will power up, but power off almost immediately. I assume that is a main board problem. Is there a schmatic available? Can one order the parts from Moultrie? Any idea of prices? If not, is there anywhere else one can get parts? I assume someone makes the parts for them. I'm wondering if there is a part number on the circuit boards. I would think the display would be a common item. I already swapped it out so know it's bad. OR, i


For questions regarding Moultrie products or repairs please call (800) 653-3334 or (205) 664-6700 Monday through Friday 8 a.m. to 5 p.m. CT ... Digital Cameras

6 month old Canon Power shot S5IS flip out LCD screen will not keep connection, the screen goes blank and can not be used. I primarily use this feature to take my shots. When I opened the screen to take my shot I notice I had to move it around and the screen came on. Now it will not come on no matter how I move the screen, up, down, right left, twisted into the body. It does not work. Looking at the body of my camera the screen is not loose, nothing looks abnormal from the outward appearan


Canon will fix this under warranty. Call 1-800-OK-CANON. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7707 seconds