Having problems with your Kodak EasyShare V570 Digital Camera ?

Assist me please Immediately by clicking the play button, the screen goes black I get a message: "Error Camera Error # 45. EasyShare v570 Need help


Answers :

Hello there,\015\012
\015\012May I ask how long have you had this camera? This could manifest a problem wit the stuck lens. If the camera is still under warranty, I would advise you to bring it to the nearest service center. I have a suggestion though and it worked for a lot of users having this problem. I would not recommend this to be 100% working but you can just give it a try if the camera is already out of warranty.\015\012
\015\012This error is caused by stuck lens. So what you can do is to give the camera a "slap". Hold the camera and bash the edge next to the lens against the palm of your hand as hard as you can. You can also try it on the carpet of the bench.\015\012
\015\012Let me know how this goes.\015\012
\015\012Goodluck!
Repair Help & Product Troubleshooting for Kodak EasyShare V570 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Assist me please Immediately by clicking the play button, the screen goes black I get a message: "Error Camera Error # 45. EasyShare v570 Need help


Hello there,\015\012\015\012May I ask how long have you had this camera? This could manifest a problem wit the stuck lens. If the camera is still under warranty, I would advise you to bring it to the nearest service center. I have a suggestion ... Kodak EasyShare V570 Digital Camera

Lens error, restart camera is the error message I get when trying to turn on the camera. The lens will not fully extend and just starts to wiggle back and forth then I get the error message when the screeen gos black. help!


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot S3 IS Digital Camera

Olympus DE-510 Zoom When I turn camera on, the screen has a red T at the top, with a box saying Yes, and one saying No. The line at the bottom says Go>OK. If I click OK, I get the same screen again. If I click Yes, I get a Card Error message. I cannot take a photo. I am on a cross country trip, and don't have my manual, but I sure would like to be able to take pictures of the Rockies! I know the camera is old, but I love it. Please help me to get it working again. Thanks, Toni Sinclair


I tried to find more information on the zoom error, and couldn't find much, but I did find a free manual, which might help:\015\012 ... Olympus Camedia D-510 Zoom Digital Camera

Error Message When I take a photo with Nikon D60 it's as though the shutter gets stuck and it gives an error message on the screen (Error! Press shutter release button again.) The top half of the photos are completely black. Also, there have been a couple of times during this problem that the shutter clicks and when looking through the viewfinder everything appears tinted. Weird, I know! Any ideas or suggestions?


Try to take off the battery and reset the camera. You can also try to remove the lens and check the mirror opening..see if there is some thing stuck there. You can try to click the shutter while the lens is removed. If this procedure didn't work I su ... Nikon D60 Digital Camera with 18-55mm lens

Zoom Error Just bought an Olympus SP550 Ultra Zoom for my daughter. In less than 24 hours the cam developed a problem. When she turns it on, the zoom lens goes part way out, a message "zoom error" shows on the screen, and it powers itself off. We thought it might just be the batteries, but new ones didn't help. Similar problem with SP-560UZ On power up lens clicks & sticks when zooms out. Then get "zoom error" & powers off. Tried new batteries, helping lens out. Leaving batteries out. Could not


I think a grain of sand was blocking the zoom tubes. This will not work if the camera has been dropped & the zoom apparatus is bent. It is entirely at your own risk & may invalidate any guarantee but they may charge anyway if you have got san ... Digital Cameras

My Sony DSC S40 Digital Camera is giving problem. I purchased the camera on Sept 2005. Lately i am getting format error. Whenever I click photos I am not able to get my half of the photos. When I try to connect the PC and transfer the pics, message displays file is corrupted and when i disconnet the cam and try viewing it on the camera then format error. My valuable pics have been lost. Please help !!!


When you disconnect from the computer, do you use the "safely remove hardware" icon at the bottom right of your screen or do you just yank out the cord? When you yank, most of the time you will corrupt the card and even the camera. You can try to dow ... Sony Cyber-Shot DSC-S40 Digital Camera

Nikon FotoShare After using Nikon FotoShare successfully for some years, suddenly on clicking "send" I get this error message 12152 and "server returned invalid or unrecognised response" What has happened After using Nikon FotoShare successfully for some years, suddenly on clicking "send" I get this error message 12152 and "server returned


Transport Status 12152 means Connection Closed by Server.\015\012Eg the server has been taken down momentarily for database or server\015\012maintenance, or there has been a network error. Thi ... Digital Cameras

Hi,Have got got a canon(powershot a710 is) whenever i turn on the camera i get a few beep noises and the screen remain black with the message'lens error,restart the camera'....and it then turns off.....I have not dropped it down.hoping someone would help me out with a solution. Cheers, Sanjana


The lens is jammed. Usually dust or grit gets in the mechanism and causes it to stick. Could try blowing down the side of the lens but it will probably need taking apart and cleaning. It is not an easy job to do but it might be worth trying as it wou ... Canon PowerShot A710 IS Digital Camera

Hi, i am unable to transfer any pictures from my newly purchased D90. The transfer software loaded fine onto my lab top and it recognises the D90 camera as external hardware. However when i click start transfer nothing happens nor do i get any error messages. I can view the photos fine when the card is in the camera but for some reason the software cant see them when i connect via USB - can anyone help or ideas please?


I don't even bother with the camera and software. I use a card reader to download to a folder I create on my desktop. Once the pics are there I can view them from there or use a photo editing program such as Photoshop Elements to work with them. Much ... Nikon D90 Digital Camera with 18-105mm lens

I hit the on/off button on my Canon IXY Digital 10 (7.1 m-pixel), and it will not turn on - I get black screen and message:'Lens error, restart camera'. It was working fine before, but has now not worked for over a month. It was not dropped or otherwise obviously damaged. Please help! Tim, Reading


Take out the battery and see if its damaged. if it seems fine put it back in. ... Canon IXY 1000 Digital Camera

I just got the Nikon D3000 for Christmas, new in the box. I began to put it together, and I attached the lens and heard the click and everything. It has an error message that says "Lens not attached", when the lens OBVIOUSLY is attached. I can only "take a picture" in M mode, but there really is no picture at all. All that I can get is a dark image. Please help! Btw, I don't fully understand professional photographical terms, so please explain them thoroughly. Thank you!


Lets get you going on this camera. For the lens thing, the 18-55 Nikon lens is a good one. I'm going to\015\012 assume the lens was loaded while the camera was turned on (not a good \015\012idea). What I'm going to suggest is that you make sure the b ... Nikon D3000 Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

I have a Nikon S6 digital camera, everything about the camera seems to work fine, except for this "lens error" message I keep getting. Sometimes I'll turn it on, and I can use it just fine. But then there are other times where I have to turn it off and on in order to get it to work. And then there are those times where turning it off and on don't help. I usually give up and try again later. Sometimes it'll still give that error message, and other times, it will just work like normal. What can


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon COOLPIX S6 Digital Camera

Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!


Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera

FORMAT ERROR I have inserted floppy disk and error message keeps appearing. Format error-have tried several types of disks and nothing will work-also have inserted memory stick-getting same message-HELP ME PLEASE. Contact me at [email protected] Thanks


You may have a bad floppy... Just like floppy drives in PCs sony floppys do go out. If you search around as I did (sorry don't remeber the link) you can find diagrams on how to replace the floppy and they are available for sale! I think we found so ... Sony Mavica MVC-FD200 Digital Camera

How do I transfer the pictures taken with my Olympus μ-5010 to my HP71-340US Notebook? I connect the camera to my PC's USB port, my PC recognizes the camera, I get the schematic diagram on my PC screen showing the connection but, when I click on "Transfer " I get the message "There is no Media to Transfer". When I click on the Arrow which is on the connecting line of the diagram pointing up towards the "Transfer" box, I get "Camera Error". I bought the camera a couple of days a


You might want to consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (eit ... Digital Cameras

Ok, I turned my Pink Coolpix digital camera (not 6 months old yet) on this morning, the lens was going in and out and the error message reads lens error! Can't get any further than that message. Anything I can do or is there something major wrong and have to take it to a repairer. Thanks, Coralie. I am at reception at work thus the different email address, please send help, or answer to my email address.


My daughters Sony Cyber-Shot had the same trouble and I read that many times it is caused by foreign matter getting in the lens gearing. 1st ... Nikon Digital Cameras

Ok, I turned my Pink Coolpix digital camera (not 6 months old yet) on this morning, the lens was going in and out and the error message reads lens error! Can't get any further than that message. Anything I can do or is there something major wrong and have to take it to a repairer. Thanks, Coralie. I am at reception at work thus the different email address, please send help, or answer to my email address.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Nikon Digital Cameras

Hi, I have Nikon P90. From last week i am facing following problem. Whenever i switch on my camera for taking pic, everything starts but i get message on the screen " Lens Error (If lens cap is attached,turn the camera off, remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem.


Hi,Here is a tip that I wrote about How toget a Digital Camera Lens to work againSteps toRepair a Digital Camera Lens\012heatman101 ... Nikon D90 Digital Camera with 18-105mm lens

Hi Team hve a problem with Olympus Camedia C-450 Zoom Digital Camera - put in new memory card (original) and since cant get camera to work - I think the said camera is almost new - but I get error message -CARD ERROR - when asked to format? - please help? Paul


You need to format a card in the camera to erase and optimize it for the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. ... Olympus Camedia C-450 Zoom Digital Camera

Need help Hi i have a Largan Chamelon Mega and I have the program download like i am suppose to but when i plug the camera in to my oc to get the pics I get a error message of Device Not ready ??? I dont understand why its doing this it has never done it before ...I have tried to uninstall the program and reinstall it but that hasnt helped any assistance would be great


If your computer is a Windows ME/2000/XP/Vista it does not need any additional software.Remove any camera associated software and simply plug the camera in- The Camera/Scanner Wizard will come up and ask what it is you want to do.Let Wind ... Digital Cameras

Error message Can u please arrange pics to do it with a diagram. I am having trouble with my finepix Z20fd camera. My pics will not download to my computer. My usb cable is connected and the message i get on my camera is communication error. Please help.


Use a separate card reader to download your pictures. ... Fuji Finepix Z20fd Digital Camera

Deleted Pics I think I may have accidentally deleted my pics when I pressed the format button on my Casio ExiLim Digital. When I tried to view the pics, the message says no files; I do have a 1gb memory card in the camera. I sent this message earlier but, in my excitement that a solution was sent so swiftly, I clicked on the accept instead of the reply and failed to get the final solution from the Guru that tried to help me. What a klutz, I am. HELP


First of all, do not save any new file to camera's memory card.Take out memory card, and connect it to computer using a card reader. You should see memory card shown as a drive letter (like H:) in Windows Explorer.Download this photo reco ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Canon A640/A630 I am trying to download my pictures to my computer. I have completed this task since 07/07. For some reason I cannot get my pics off because of this 'communication error" I even tried it on another computer. Batteries are charged, and I can pull pics off the memory disc to PRINT, but not to download?? Please help me I have a Canon Powershot A560 and I am tired of getting this communication error message. I would like to download the pictures to the mac as soon as possible, but e


Hows the memory on the computer and is the system recent ... Canon PowerShot A560 Digital Camera

When I click on the download button, I get this message: "There is a connection error. Please check the troubleshooting guide in the user's manual." The troubleshooting guide suggests that I uninstall the PLD-822 driver and reistall it to solve the problem. I have tried this several times, but each time I try to download my photos I get the same message. I think the basic problem is the sticker on the binoculars "Made in China".


Hi, I have experienced this many times with various USB devices, they can be finicky little things. Try doing this procedure below.\015\012\015\012We need to remove and reinstall all USB controllers, and "Zero" the system..\015\012 ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4343 seconds