Having problems with your Kodak EasyShare V603 Digital Camera ?
It says my device is not supported. I don't understand why
Repair Help & Product Troubleshooting for Kodak EasyShare V603 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a Nikon s10, just bought it. We videoed our daughter and tryed to put it on our computer and it says windows doesnt support it and is unable to play the video. I have a brand new labtop, so i dont understand why its not working.
Have u checked whether the option "Mass storage" has been selected.In Menu=>Setup=>Interface=>USB, select mass storage, with this the camera memory card is read as any other pen drive in windows.Hope this helps.....good luc ... Nikon Digital Cameras
It says my device is not supported. I don't understand why
... Kodak EasyShare V603 Digital Camera
Hi i have a kodak easyshare c183 camera and when i plug it into my computer i get the message on the screen of the kodak that says "for operation with printers, picture frames and non-computer devices, please refer to the extended users guide at www.kodak.com/go/support" I dont understand. this is a laptop, and i downloaded the easyshare program into my laptop! why doesnt it work???
I have the same problem, but with my Kodak Easyshare C195. My laptop doesn't have a place to put the memory card. It used to work fine. I would plug in the camera to laptop, photos would be on the laptop. Now I just get this message: For operation wi ... Kodak Easyshare C813 Digital Camera
Uploading pictures whenever i go to hook up my camera to the computer it comes up saying connecting to pictbridge device then a minute later says enable printer to connect and underneath says switch on menu then i do that and all it does is come up with usb connect......do i need to change it from pictbridge to ptp or mass storage or what? i dont know what just happened..its worked fine for me every other time
Mass storage is easier, in my opinion. In that mode, when you hook the camera up to the computer, it will show up as a device in My Computer. Then you can just access your pictures there. ... Sony Cyber-Shot DSC-S500 Digital Camera
My Youcam says Cannot connect to this Video device(USB Camera). Please select another capture device via Setting or close any application that may be using this video device and restart YouCam please help me out .. i dont know what to do
I've got the same problem...i'm using build in usb camera on HP compaq labtop and the operating system is windows vista..please guys any help?? ... Digital Cameras
I have a polaroid dvf-720 brand new and trying to record and 2mins and it says memory full? i dont understand,and i have a memory card that says card error,need help or im in trouble with the wife!
Ok so I have the same problem I went out and purchased an SD card...but it doesnt work. So I called Polaroid and you need to purchase a CLASS 6 SD card of 2gb or more for it to work properly...figures it does not say that in the manual. ... Polaroid Digital Cameras
Camera wont read memory card error message say: memory card error, please check the card. I dont think its the card becaouse other devices can read it
There are several possible causes for "memory card locked", "memory card error", or "no memory card". Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format came out. Others include problems with the tiny slide swi ... Panasonic DMC-TZ5 Digital Camera
I need to transfer my video from canon mini dv mv 901 to my computer. but i dont have a software. when the camcoder is plugged, the compreter says it is unknown device.
There are some downloads for this camera on this pageI suggest that you download the manual first, to find out what you need to do. You do ... Digital Cameras
I have been using my Easy Share C182 for a year now to upload my photos and videos directly to my computer from my camera using the USB that came with the camera. Now suddenly, it won't load. The computer says it doesn't recognize a supported device.
Time to start using a separate card reader. You'll like it better anyway.\012 ... Kodak Easyshare C182 12MP Digital Camera
I wanted a new memory card for my camera - this model- and was sold a Sandisk SDHC flash memory card. Before opening the package I'd like reassurance that this is appropriate for my camera as the assistant did not ask me the make and model of camera and I see that the small print says :"not all devices support SHDC cards". If it isn't I shall return it unopened for a refund and would you tell me what would be appropriate.
If your camera is truly the Finepix A120, it uses xd picture cards, not SDHC cards. ... Fuji FinePix A120 Digital Camera
WANT TO TRANSFER PHOTOS FROM CAMERA ON TO MY COMPUTER, DONT HAVE THE CD BUT HAVE USB CABLE, SAYS DEVICE NOT RECOGNIZED, HELP
Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connecte ... Vivitar ViviCam 3915 Digital Camera
Hook Up. The C643 digital zoom camera was working ok, with my Windows 98 S.E. Then I F-Disk and reformatted my computer. Now when I try to use it. I keep getting this message. (Cannot get the device information) Took it out and put it back in serveal times. Same thing. Sent letter to Kodak. Got back sorry we no longer support Windows 98 and the web page they sent me was no help at all. I'm kind of upset. Been using it for a year on Windows 98 S.E. And now they say tough.
Yeah that's frustrating.. here's something that might help though.Follow this link:http://www.kodak.com/global/en/service/downloads/dln_ekn031209.jhtml?operatingSystem=windows_98_se&downloadLanguage=enThere yo ... Kodak EasyShare C643 Digital Camera
USB When i try to put the pictures from my camera unto the computer it wont let me it says the scanner and camera wizard cannot operate on this device because some of its files and folders may be secured by windows I dont know if you can help me but hopefully you can
Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Samsung Digimax S600 Digital Camera
Hi there. I've just bought a remote shutter/controller JJC JR Series Infrared Controller,for my Panasonic DMC FZ50,but it doesn't work at all. I don't know if I'm doing something wrong or if is the gadget that is faulty. I don't know if the light on top of the receiver should be on,because is always off(no light); I don't know if I have to program something in the camera before connecting the device; I don't understand why even if I do everything as the instructions say,nothing ha
Hi,\015\012\015\012With this camera you need to activate the power save mode or the remote will not operate.\015\012\015\012To activate it do the following\015\012\015\0121) Press menu set and then press the left a ... Digital Cameras
Everytime i connect the usb cable to my mac (any mac, ive tried 5) i get an immediate error message saying my usb device is drawing too much power and is being disabled. I cannot connect.... more info: the battery is fully charged when i try and do this and since there is way to connect to an external power source..i dont know what to do.
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras
When I connect the USB cord from my Kodak camera to the pc and i press the power button on the camera a window pops up that says "Microsoft Document Scanning does not support this type of device" There is nothing else it lets me do and i woul really like to upload pics and videos. Please sugest what i need to do.
Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Kodak EasyShare One Digital Camera
Need help Hi i have a Largan Chamelon Mega and I have the program download like i am suppose to but when i plug the camera in to my oc to get the pics I get a error message of Device Not ready ??? I dont understand why its doing this it has never done it before ...I have tried to uninstall the program and reinstall it but that hasnt helped any assistance would be great
If your computer is a Windows ME/2000/XP/Vista it does not need any additional software.Remove any camera associated software and simply plug the camera in- The Camera/Scanner Wizard will come up and ask what it is you want to do.Let Wind ... Digital Cameras
Hi I have a Canon PowerShot 460 Digital Camera and it works great when I want to take pictures or make movies. The problem is that when I try to connect it to my computer to retrieve the pictures on the camera, my computer says that my camera isn't detected. I don't understand why that is because the camera's software works fine. I thought it was a problem with the USB cord, but it works fine with other electronic devices. The USB doesn't seem to work with the camera. I don't get whats the iss
Plug the camera up in the normal way and take a look at 'My Computer'If the PC is seeiong the camera it will indicate this by 'putting' up a new Remoceable drive Icon- If it has work at it from there.If it did nmot - Remove the Camera so ... Digital Cameras
Evry time im trying to make hd film its stops after 1 minute saying "recording stoped".i dont understand why.
Is your card a class 6 or better? Class 4 and lower cards can't keep up. ... Nikon Coolpix S4000 Digital Camera
I install digimax master. but I dont understand what it say its in korean letters, how can i change the language from korean to english
Chang the language u can see it from the manual of digimax camera ... Samsung Digimax L730 Digital Camera
My Computer doesn't recognize the device and says its not working properly! the problem is i dont have the cd-rom for installation because the camera was given to me... i need to transfer my photos into my computer. How do i make it recognize my camera?
Why not do what the pros do?....use a separate card reader for downloading pictures. Then, you don't need the CD. \012 ... Sanyo VPC-S880 Digital Camera
My JAZZ X4 is not working. I put in the right memory card and brand new batteries and it powers on. The word JAZZ comes across the screen, then nothing. It doesnt go away and i cant do anything. Pressed and held down all the buttons and cant get it to do anything but say JAZZ. Wont even power off withoit me taking the batteries out. Cant find jazz support number. Dont know what to do next. How to i get it to work
... Digital Cameras
I can't find a driver that actually works! They all say download successful but when I open the program it says device not ready!! Camera says PCC... HELP!
... Largan Chameleon Mega Digital Camera
I bought this camera at wal mart and there should be some kind of support foit with paying for it but im going to try this window but before i do i have some thing to say if i have to pay for support for this problem witch really isnt a problem with the camera i need to place a pic on a web site but a error report come back to say the pic is biger than 256 ?? so is there a way for me as a user to make it smaller and if you want me to pay for this heres want i was going to say i will not pay for
Wow...you've got a lot of anger! Why don't you just look in the owners manual to find out how to set the picture quality to a lower setting. ... Vivitar ViviCam 8025 Digital Camera
Digital photo frame mercury 2.4 lcd model me-dpf24mg "device does not support this compresed rate?
... Digital Cameras