Having problems with your Kodak EasyShare V705 Digital Camera ?

Kodak v705 - Auto-focus will not focus when in zoom mode. Image on lcd screen oscillates from focus to blur. Picture image not focused.

Answers :


This\015\012 is a common problem on this set. This is either due to faulty CCD \015\012sensor or faulty LCD screen. Look at the previous recorded images or \015\012videos. If you see the same white lines in previous saved images or \015\012video's , it would be suggestive of LCD screen unless it is a faulty CCD\015\012 sensor.

If that is LCD panel, it is not worth repair.If that is \015\012CCD sensor, then you could call up Kodak to check whether CCD sensor\015\012 of your model is under recall or not.

Read an old article :-


If it is not under recall, try to get some good replacement or repair at low cost unless invest in new camera.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!
Something in the lens assembly is amiss with the zoom function, and the focus ring is getting jammed up (it focuses by electromagnets on a plastic lens holder that rotates the lens in and out slightly). You can try to spray some compressed air into the front of the lens assembly to free up any lint, dust, or sand that may be binding the focusing ring. Sometimes a gentle bump with the palm of the hand will do it. Here's a website that talks about the things you can try to fix this:
\015\012Even though the site deals with lens-error issues, it also applies to this situation.
\015\012If none of these things work, the camera will have to be serviced. To service the lens, the entire camera has to be disassembled, and then they usually replace the lens assembly as a unit. Get an estimate first, since the cost of repair can sometimes justify buying a new camera.
\015\012Good luck, hope this helps, and thanks for using FixYa.
Repair Help & Product Troubleshooting for Kodak EasyShare V705 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kodak v705 - Auto-focus will not focus when in zoom mode. Image on lcd screen oscillates from focus to blur. Picture image not focused.

Hi,This\015\012 is a common problem on this set. This is either due to faulty CCD \015\012sensor or faulty LCD screen. Look at the previous recorded images or \015\012videos. If you see the same white lines i ... Kodak EasyShare V705 Digital Camera

Focus problems Hello, I just got the new A95 after enjoying the A80 for a few months. I'm experiencing two major problems, occurring especially when shooting in low-light conditions: a. The image displayed on the LCD screen is very dark, while in the A80 it would automatically become lighter after pressing half way. b. The auto focus won't work lower indicator blinks yellow). I have experienced these problems so intensely with my A80. What might be the problem?

There are settings in the menu to turn on the AIAF did you buy it used? maybe the settings need to be reset. If you have the manual there is a sequence you have to do to reset the camera to default settings.\015\012\015\012One thing to note this may ... Canon PowerShot A95 Digital Camera

I have a nikon d200. The last time I used it (only a few days ago) it was fine, everything normal. Then yesterday I pull out out of the case and everything seems to be going wrong. It is metering INSANELY low, like a shutter speed of 100 in full daylight produces a REALLY dark image. It won't auto focus at all, and i am unable to change the fstop in manual or aperture priority modes. I tried to restore it to factory settings and the lcd screen flashed to indicate it had been restored but no luck

Your boyfriend is probably right, and it makes sense, if you can't change the f-stops. \015\012The following blog on Flickr might help you:\015\012 ... Nikon D200 Body Only Digital Camera

Auto focus has stopped working, the AF led flashes green and the imaged is blured in the LCD screen.

... HP Photosmart 935 Digital Camera

Focusing problem Until recently, I was able to look through the view finder and auto focus my image. Now, camera will not show me subject in focus, but after a I make a shot, image is in focus in the preview. Manual focus works just fine, it's the auto focus I am concerned about. I have cleaned the lens - please help!

Well, stupid me, I didn't realize there is a diopter adjustment button directly to the right of the viewfinder. I would NEVER have known it was there, but after asking my photo-nerd friends all of a sudden the solution was apparent. Still a wasted da ... Nikon D50 Digital Camera

Focusing problems Hello, I have been trying to take close-up pictures (between 4-12 inches away from subject) but when I press the shutter button halfway, on the screen I see the image come into focus, come out of focus, come into focus,.. on and on for several moments until it settles on the out of focus image. I've tried setting the camera to the macro and super macro settings, and that doesn't help at all. I know it can focus, because I see it on the screen but for some reason it chooses the

You may be beyond (up to close) the focal capability of the lens. Even though there is a macro setting, the lens may not have the capability to focus on an object that close (without adding an external macro lens). The specification on the minimal ... Olympus SP-350 Digital Camera

Was shooting full length portraits and my Canon D40 seemed to randomly auto focus on various parts of the image...I would like the entire image in focus...do you think I have a setting wrong .. I am shooting on auto ...so I cant understand why only parts of the image are in focus. Please advise !

Hi Judee,It is about adjusting the settings.Click on the link below and watch the video to know more detailed information about your CameraClick here - > ... Canon EOS 40D Digital Camera

Auto focus i'm an amateur at this so i may be doing something wrong but when i'm in auto focus on my nikon coolpix p80, i consistently get a blinking red focus indicator, meaning the image is not in focus. it's almost never green. i don't know what i'm doing wrong. i almost never get a clear picture. can anyone help? thank you!

You push the button half way down (sounds crazy) but that is when you are letting the camera know you want it to focus and when it turns green push the button the rest of the way down ... Nikon COOLPIX P80 Digital Camera

I just received the RebelXS 1000D for Christmas and when I follow the quick start guide and get to step #7 the subject matter does not show up on the LED Screen and only the Full Auto and ISO Auto prompts just show up on the screen. When I push the DISP button it disappears but the subject matter does not show up on the screen for focusing. What am I doing wrong?

Does this camera have "live view" capabilities? If so, there should be a button for "live view". ... Canon Rebel XS / Eos 1000D Digital Camera with EF-S 18-55mm f& EF 75-300mm f Lens

The screen on my M380 does not show the image. The camera is fully charged and when I press the "on" button, the lens extends and opens. The screen is illuminated, but there is no image of what the picture will be. I can go ahead and take a picture -- it makes the appropriate sounds as it normally would and the flash goes off if needed. In fact, when I then plug into the computer, I can see that a picture was taken. However you cannot focus the shot because you cannot see the image on the s

This can be a settings problem on your camera, so what we can try doing here first is to reset or restore the camera's settings to its default and then after doing that power off the camera and take the battery out for 5 minutes then put it back in a ... Digital Cameras

The focal length on my Nikon S52 Coolpix seems to be much shorter than it was originally. No matter the adjustment I make to the settings, at least part of the photo is extremely blurry. I have tried both with Auto-Focus on and off, but there is always a small square in the center of the view finder, and this is only region that shows a focused image. The camera used to produce sharp images throughout the picture. How can I adjust this?

This ccan be an error in the lens settings that have changed the alignment or a possible shift of the lens before the CCD imager.\012This canot be retified wxternally asn I advice that you get help from Nikon, specially if under warranty for a ... Nikon COOLPIX S52 Digital Camera

Auto Focus Hello people I have a 2yr old Nikon D80 i m facing a problem from yesterday, first it was not clicking on autofocus and all of a sudden its not capturing any image only. Its clicking after i do the manual focus but its not caputuring any image....and i m on my vacation nothing can be fustrating than this...please advice what can be wrong or do i need to take it for servicing Naveen

Here are two things to do while on vacation.\015\012\015\012Be sure lens is set to M/A\015\012Set camera to "green auto button" on top of camera.\015\012\015\012Hopefully, that will get you back to working. ... Nikon D80 Digital Camera with 18-135mm Lens

I put in new batteries in my Pentax ist-D and now the auto focus will not function. I get no beep or light to indicate when it is in focus because even when I move the button from M to Auto, the view finder still shows the M on the screen. All was working fine until now.

Remove the lens and clean the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. Re-attach the lens and make sure the ring (if you have one) is set to "A". ... Pentax *ist DL Digital Camera

I cannot get my camera to focus on anything further than about 20metres either on auto focus, infinity or manual focus. Focus seems to be ok on closer distances. For a period of time today I had a Lense Error message onthe monitor screen, this message has now disappeared. Any suggestions will be much appreciated. Regards James Kirk [email protected]

Hi..the focus of the picture depends upon your camera \015\012zoom facility.check that out.what was the error message \015\012it was showing.\015\012thank u.. ... Digital Cameras

No image The LCD screen flickers, nothing is visible, no shooting of image. However, on shutter click in Auto mode the flash operates but does not record any image. In view mode, the already recorded images are displayed.

No image in shooting mode on Canon S500. Flash operates and shutter clicks. Whats wrong? ... Canon PowerShot S500 IXUS 500 Digital Camera

I have a Canon Powershot A630 that will not focus. I have it set on Auto and when I see the image, it is always blurry. I can't get the lens to focus. It goes in and out of focus and settles in bl

... Canon PowerShot A630 Digital Camera

I have a Canon Powershot A630 that will not focus. I have it set on Auto and when I see the image, it is always blurry. I can't get the lens to focus. It goes in and out of focus and settles in bl

Hi! Make sure your lens is clean and free of any smudges or debris. Ensure that you are far enough away from your subject that the minimum focusing distance has been achievedMost auto-focus systems use contrast to detect what ... Canon PowerShot A630 Digital Camera

Focusing Problem I have a Casio Exilim 10.1 Mega Pixel Digital Camera EX-s10 and I have had it for a little over a year now. I dropped it in sand and the lens would open then beep then close on its own. It stopped doing that and started working though in about 2 days, but now the focus isn't focusing. When I turn on my camera the image on the screen is blurry. What should I do?

Hi, if you can open your camera and remove the lens unit assy(just be carefull to the flat cable its easy to be broken) you can clean by yourself just to remove the sand goes inside of the lens unit and also to the gear.make it sure you need to use m ... Casio Exilim Card EX-S100 Digital Camera

Dark exposure I have a Nkon D40x. Setting the selector to Auto, Shutter or Appature(SP) the image comes out dark. The historgram shows a spike that is totally contained in the first quarter of the screen. When I use the manual setting the image improve as the shutter speed was slowed down (1/80sec and ~7f the image improves). Any guess as to what is happening?

Check your ISO setting...should be between 100 to 400 for normal pictures.Did you change your exposure compensation setting to something other than "0"? Is the aperture ring on the lens set to the "A" position? ... Nikon D40x Digital Camera

Canon Ixus 75 Auto Focus fails. It appears to be trying to focus and the small box appears on the screen showing where it it trying to focus. I think it's always focussing very close up. Macro is not set. Thanks for any help.

This usually happens when there's not enough contrast between the subject and the background or the subject itself is too 'flat'.Also if there's not enough light in 'flash off'-mode you cannot focus. Try using the focusing assist light. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

In auto mode - can't get the image on the LCD screen - only through the viewfinder. The screen remains in the settings screen

Have you enabled Live View in the Menu? After it's enabled, press the SET button at the centre of the quick dial to turn on/off Live View. ... Canon EOS 500D / Digital Rebel T1i Digital Camera

Recently, my Canon Powershot A95 has had an intermittent LCD display problem. While beginning to frame and focus a shot, the image streaks from edge to edge of the screen. If the shutter is snapped, that is the image recorded. The image looks like the subject is rapidly moving, or as though it is a time-lapse photo. Could this be a CCD (chip)issue?

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

Whedn I turn on my camera which is a digital ixus.i the screen does not focus on the image to be taken but is a blank black screen with icons from the menu in each corner. How do I get the working screen back onto the camera. Thanks.

Hi.\015\012\015\012\015\012If that was just a setting problem, you would have been able to reset the camera simply taking batteries out for one minute.\015\012\015\012\015\012Ixus cameras do not have any internal battery or no ... Digital Cameras

Camera auto focuses, shoots but the view screen is black

Check the playback menu that the review time has not been set to OFF. This will stop any pictures displaying on the back of the camera when taking them!\015\012\015\012I leave mine at 2 secs which is long enough to quickly review and kee ... Canon Rebel XT / EOS 350D Digital Camera

Hello... I've been using my sony DSC H5 which is great but recently when I hold the shutter button down halfway to focus does not lock in the image but it does auto focus when pressing the shutter button down. I someone knows a setting to check please let me know since I am unable to find it. thanks....

You need to replace the control assembly, see the solution here:;\015\012http://www.fixya.com/support/t1811939-shutter_button_popped_off_am_out ... Sony Cyber-shot DSC-H5 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2574 seconds