Having problems with your Kodak EasyShare Z1012 IS Digital Camera ?

Keeps turning off just after i turn it on - Kodak EasyShare Z1012 IS Digital Camera


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare Z1012 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Keeps turning off just after i turn it on - Kodak EasyShare Z1012 IS Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EasyShare Z1012 IS Digital Camera

My kodak easyshare MD853 digital 8.2 camera has some problems.. When I turn it on it says: lens error message 122,1,0,0 and the zoom will not retract back into the turn off position.. I called Kodak & it's still under warranty however they say if it's something that not under warranty they will charge me anyway... I bought insurance through Target as well & they referred me to kodak. Does anyone have any suggestions on how to fix my camera?


My camera i dropped it and it was off and i waiting a few minutes and then picked it up and tried to turn for a photoshoot and the dum camera wont work now it says a lens error and it wont come up or anything, so i dont know what i should do ... Digital Cameras

Problem with Kodak EasyShare CX7330 Digital Camera LCD screen is black-cannot take photosWhen I turn the camera on the LCD screen lights up with the Kodak easyshare screen then it goes black. I can take a picture with or without the flash and it is black


Hello, Sounds like a CCD failure, very costly to repair. ... Kodak EasyShare CX7330 Digital Camera

My kodak cx7430 digital camera wont turn on - Kodak EasyShare CX7430 Digital Camera


... Kodak EasyShare CX7430 Digital Camera

My Kodak EasyShare C180 Digital camera, came with "Kodak" batteries after those died, I inserted new batteries, and now everytime I try to turn the camera on, it doesn't respond. I have tried Lithium batteries, and even re chargable batteries. Nothing seems to work. Does this camera need "Kodak" batteries to operate?


\015\012We recommend you to use Rechageble batteries with 2000 mAmp or higher alternatively AA non-rechargeable lithium batteries (Ni-Mh)\015\012\015\012Kodak Digital Imaging Support Centre can be contacted on any of the numbe ... Kodak EasyShare C180 Digital Camera

My lens on my kodak easyshare m580 digital camera is stuck open and as extended as it could be. i've dropped it and that's what made it do this. i cant turn my camera on or off but when it gets turned on the inside of the camera makes a rough noise and the lens wont go back inside.


... HP Photosmart MZ67 Digital Camera

My KODAK Easyshare z740 Digital Camera turns on 2C


Fixing your problem could be as simple as cleaning the battery contacts\015\012in the camera, or the solution could be a lot more complex and\015\012expensive. Here's a link to the Kodak Help Center - it provides a\015\012simple Q&A format to ... Digital Cameras

My kodak Z1012 IS camara flash does not work - Kodak EasyShare Z1012 IS Digital Camera


... Kodak EasyShare Z1012 IS Digital Camera

Camera turns on then imediately turns off - Kodak EasyShare V1233 Digital Camera


Good\012 day,This is a common problem and sometimes can be fixed.Please\012 see details on my tip on how to fix this error here: ... Kodak EasyShare V1233 Digital Camera

Digital camera new batt. and it wont turn on - Kodak EASYSHARE M1063 Digital Camera


Same camera same problem. Lets start a list to get this item recalled. ... Kodak EASYSHARE M1063 Digital Camera

Lost SoftWare For My Kodak EasyShare Z1012IS - Kodak EasyShare Z1012 IS Digital Camera


Hello. Heres a link to download Easyshare software. Cnet is safe and reliable\015\012 http://download.cnet.com ... Kodak EasyShare Z1012 IS Digital Camera

Kodak camera easy share does not turn on - Kodak Easyshare C813 Digital Camera


Is battery good? does switch feel like it clicks sounds like a power problem batteries go dead after a while and contacts get dirty. make sure you have a good touch of battery power. ... Kodak Easyshare C813 Digital Camera

My kodak easyshare m575 wont turn on? - Kodak EasyShare M575 Digital Camera


... Kodak EasyShare M575 Digital Camera

Camera turns on then immediately turns off - Kodak EasyShare Z740 Digital Camera


Check that you have fresh batteries in the camera.Check that the camera has rechargeable LiIon batteries, as recommended by the manufacturer. That's what I use in my Kodak camera, and using alkalines didn't work for me. ... Kodak EasyShare Z740 Digital Camera

My kodak easyshare DX4330 wont turn on - Kodak EasyShare DX4330 Digital Camera


Here are the steps:\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).\015\0122. Clean the battery contacts. ... Kodak EasyShare DX4330 Digital Camera

Why won't my Kodak EasyShare C613 turn on? - Kodak EasyShare C613 Digital Camera


Having received no response in over a month, I assume this is no longer a problem. ... Kodak EasyShare C613 Digital Camera

I have a digital camera kodak easyshare V1253 and when i turn on, the lens go out ,but inmediately the camera turn off and the lens go in back ,I check the batery in a especial store and is in a good condition, then i want to know the problem and how can i do for fix it


Remove the batteries and clean the battery contacts inside the camera\015\012with a soft cloth (a heavy buildup on the contacts may require cleaning\015\012with a fine wire brush, steel wool, or sandpaper). Remove any residue\015\012that the cleanin ... Kodak EASYSHARE V1253 Digital Camera

When i turn my Digital Camera Kodak EasyShare DX 4900 the message E11 appears but the camera does not turn on.


Remove the batteries and clean the battery contacts inside the camera\015\012with a soft cloth (a heavy buildup on the contacts may require cleaning\015\012with a fine wire brush, steel wool, or sandpaper). Remove any residue\015\012that the cleanin ... Kodak EasyShare DX4900 Zoom Digital Camera

MY DIGITAL CAMERA WON'T TURN ON. - Kodak EasyShare C140 Digital Camera


Here are the steps for the no power problem:\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).\015\0122. Cl ... Kodak EasyShare C140 Digital Camera

Kodak m753 camera will not turn on - Kodak Easyshare M753 Digital Camera


Here are the steps for no power issues: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the batter ... Kodak Easyshare M753 Digital Camera

My Kodak Easyshare M580 will not turn on. - Kodak Easyshare M580 Digital Camera


... Kodak Easyshare M580 Digital Camera

Kodak EasyShare MD41 Digital Camera the lens is stuck out and will not turn on


... Kodak EasyShare MD41 Digital Camera

Kodak EasyShare C633 6.1 Megapixel digital camera. want turn on


Maybe it needs new batteries..my camera does this but when it needs batteries...i'm thinking of getting a new digital camera because i have to buy batteries for it every week no matter if they're lithium or rechargable...so don't know if this is the ... Kodak EasyShare C633 Digital Camera

I bought my daughter the Kodak EasyShare C143 digital camera for Christmas and it wasn't until a few days ago that she first tried to upload the pictures she took with it onto our computer. When she uses the cord that came with the camera to connect it to the computer the camera instantly turns off. I tried it after she told me about this and the same thing happened to me.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak EasyShare C143 Digital Camera

I have a Kodak Easyshare model dx5430 digital camera (5mp). It has worked like a champ for years. Last night I was at an event when the image display went dark at picture 31. All preceding photos were able to be reviewed. The camera flash works fine. The camera displays all the other characteristics of a working unit. It turns on and off; the flash works, the menu is accessible - everything. It just doesn't register any photos. Even in close-up mode, there is nothing. It's as if the lens cap is


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot A75 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4261 seconds