Having problems with your Kodak EasyShare Z1275 Digital Camera ?

My camera will not power up. Was working fine the

\015 My camera will not power up. Was working fine the battery light came on saying low battery. Then quit working have changed out batteries and still no power. I put it on my docking station and it will still not power up? Now kodak wants $100 to fix.\015

Answers :

The problem you describe is frequently the result of dirty/corroded\015\012battery contacts in the camera. Try removing the batteries and\015\012cleaning the inside contacts with a fine wire brush, steel wool, or\015\012fine sandpaper. Remove any residue left from the cleaning, then\015\012replace the batteries. Hopefully all will be well.
\015\012If the cleaning doesn't work you might want to check the Kodak troubleshooting guide at:
Repair Help & Product Troubleshooting for Kodak EasyShare Z1275 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I bought a power adapter for the camera, but it doesn't seem to work without batteries in the unit. If I use the batteries alone, I will eventually get a red blinking light at the back of the camera, indicating low battery power, hence the purchase of a power adapter. When using both power adapter and batteries, the red light on the front of the camera is illuminated. The green light on the back of the camera is blinking. The camera seems to work fine while recording video. But why won't th

... Kodak EasyShare C330 Digital Camera

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

Hi guys..... i was given this camera yesterday by my mom as a present, she has had it now for a while and it was working fine. i received the camera in working order....connected it to my pc and took all of her pics off the camera....thought i would charge up the battery so that i could start playing with the camera and trying out all the different settings....... Well i plugged the battery back into the camera and pushed the power button....the power luight comes on for a 10th of a second and g

Now you can try this:Try taking the battery out of the camera again, and carefully putting it in, again. Make sure the camera will turn on, to check that the battery is well seated.Then connect the proper charger. If there are ... Sony Cyber-shot DSC-W70 Digital Camera

Camera works fine with power supply cord connected. It will also charge the battery if connected to camera and power supply connected to ac outlet. Checked battery and it has 8.32 Volts stored in it after charge, however the camera will not power on with fully charged battery. Checked DC connection plug where power supply connects to camera and battery voltage present at connecting port with charged battery connected. Checked 3 Spring pins where battery connects on camera and voltage present whe

Your charger is probibly the problem i had a friend of mine that had the same problem but different camera i told him to get a new charger he did and it worked so yoyu do the same goodluck:) please rate this solution... ... Digital Cameras

I have a samsung L200 digital camera. It was working fine until my 2 year old little girl decided she needed to play with it. Not sure if she done something or not but now the camera will not work. When I try to turn it on the power button lights up but that is all that happens. The screen does not come on or anything else. Also the lens seems to be stuck and will not go back in. And I also just noticed that the power button will only turn the camera on but will not turn it off. I was trying to

Sounds like she may have dropped it and caused a lens problem. I don't know how much damage you've done so far in attempting to disassemble it but, if you can, put everything back and try the following:\012\012 ... Samsung L200 Digital Camera

Hi. I have a Canon G9 camera. I bought in October 8, 2007 but did not register the camera's warranty until a few days ago. Here's the problem. I dropped the camera a weeks ago... Everything was working fine, no problems. After I bought an extra battery I tried turning the camera on but would not power up. In fact will only power on if I insert and remove the battery several times. Once I get it going, however, it powers off with the lens extended. Please tell me what my options are, s

Hi Cacy,\015\012I don't want to offend you, please don't take it that way, but since your problems began with the addition of the new battery... I have to ask the question. Are you absolutely sure you bought the right battery for your camera? ... Digital Cameras

Hello, I purchased a finepix s5700 about 18 months ago. It has worked perfectly until the last few weeks. I can turn the camera on if I hold the playback button and switch on the power, and can scroll through everything in the memory, but when I press the shutter to take a photo, the camera switches itself off. If I press the power by itself the green light comes on for a millisecond, then switches off. It has not been wet, dropped or otherwise. I had it on the shelf one day working fine, the ne

Your\015\012problem\015\012may be due to weak/worn out batteries or corrosion on the battery\015\012contacts inside the camera which can\015\012prevent the full power o ... Fuji FinePix S5700 Digital Camera

Hi I my new(3 months old ) PowerShot SD1300 IS camera has a problem. Initially worked fine ,but suddenly it is not working. Issue is it will power up only once after many (5 to 6 hrs) put idle.When powerd on , lens will come up and the camera will go of,lens will remain out.It wont respond(power led also goes off).Again if we put idle for some hours when we press first lens go in ,comes out and again goes off. Please let me know what could be the problem.I checked it is not problem with battery

Hi. I\015\012 note that you have checked the lens and Canon service has said the PCB \015\012needs to be replaced, but the cost is too high. However you have asked \015\012if there is anything else you can do. ... Canon Digital Cameras

Displays all white in all modes. Kodak V570. Turn the power on and all I can see is white. I have tried a different battery an no battery, just power cord. I know the camera good enough I can go into the menu options and select some different features without actually seeing the menu. All that seems to work fine and the lens is working ok. I can push the shutter button, the flash goes off. I can't see the photo on the camera, but I can see the photo if I put the SD card into my computer. Please

Displays all white because all the color screen have RGB mode if any of mode's are not work correctlly it's mean's color chip was fail and not working. u have to repair ur camera and change ur display screen. ... Kodak EasyShare V570 Digital Camera

I have a Pelco Spectra mini in a warehouse, we replaced the previous camera with this new one but the PTZ function does not work. The old camera worked for while and stopped. We moved the new one to another location and the camera works fine. The power is local about 150 ft. on 16awg wire. The control is run via cat. 6 cable and is 1000 ft. long. It is wired to an amp that changes it to coax and feeds the DVR. There is repeater anRES MHUBX8 Hub 8 port repeater in line with one pair on it. It say

Hi. Did you call Pelco's customer support? They should be able to talk you through troubleshooting the camera to at least determine if this is a defective camera or not. ... Digital Cameras

Hi, my fuji fine pix camera has absolutely no power, i need it tommorow night for a big family event and it wont work. When i try and use charge it also there are no lights etc indicating a charge. A few month back i got my bag wet and the camera was in there. The camera worked after that when it was dried out. Now it does not, is there anything i can try at home to get it to work ??? :/ thankyou.

If the camera got wet the way you described, it can run for days, weeks, and months, but even with your best efforts to dry it out, moisture still got in there and caused it to fail. I have worked on countless pieces over the years that ... Digital Cameras

Battery/Docking Station The camera was working fine. No, I did not drop it nor has it gotten wet. I had recently gotten back from vacation and put the camera on the docking station. I extracted some photos put them on my computer. Then proceeded to just let the camera charge. After a few days I went to go and use the camera again, but it would not power up. I get nothing from it. Now, I went on Amazon and bought an equivalent battery to replace the Casio one. The camera worked. So I put it on t

It seems like my docking station won't charge non-Casio batteries. ... Casio EXILIM EX-Z1000 Digital Camera

Camera FX35 was working fine. In middle of taking pix in Oxford, screen suddenly refused to come back on, although optical viewfinder works and on screen viewing of taken shots works OK. Is there a power-saving feature I accidently turned on? Only have the simplified manual with me and am new to the camera. Tried my spare battery but same results. I can continue to take shots via the viewfinder and shots seem to work, but I really want the screen back -

The [AUTO LCD OFF] of the [ECONOMY] mode is active> Press the shutter button halfway to cancel these modes.Charge the battery or replace it with a battery which has enough capacity. ... Panasonic Lumix DMC-FZ7 Digital Camera

My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.

... Canon PowerShot A400 Digital Camera

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.

You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!

You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

Just bought a Canon Powershot sx10is. Bought used. worked fine at first. Now when I try to power on the camera the LCD screen quickly flashes white. The camera never turns on. I have tried various types of batteries including alkaline and rechargable. I have also tried replacing the small watch type battery that is in the camera (CR1220) and nothing works. Any Ideas?

I don't know where you bought the used camera but if you can, return it. ... Canon PowerShot SX10 IS Digital Camera

I have a Nikon D80... a year old. The following functions/buttons stopped working for no apparent reason in the same time frame. - holding the delete and metering mode buttons together to format memory card. (however the buttons independently work fine) - holding the WB button (set to PRE) to set preset white balance. - when camera is on... turning the power switch to the "bulb" symbol to illuminate the control panel on top of camera not working. thank you for any help you can off

You have the latest firmware installed already and you said you updated again just to be sure.Certain button combinations that used to work don't and the buttons work independently.Sounds to me like the BIOS chip itself is cor ... Nikon D80 Digital Camera with 18-135mm Lens

Help please last time i used my vivicam 5340 digital camera it worked fine. i have been trying to turn it on for the last couple of days and wierd stuff has been happening.the welcome screen comes on when i press the power button.I see the battery symbol comes on and then it goes off.i have been trying it now for a while and the same thing happens each time. i recharged the batery and tried again to put it on. that didn't work. I placed it on external power, that didn't work either(i took out th

See if keeping the power button pressed continuously without\015\012releasing keeps the camera on ... Vivitar ViviCam 5340s Digital Camera

Power/lens Problems I'm having some power/lens problems with my camera. When I turn on the power in either the picture or video mode, the green light will turn on for a split second then turn off. The lens does not come out at all. However, when I try to turn it on with the picture viewer or in the menu it works just fine. When I start with the picture viewer and then switch to the camera it turns off. Thus it seems that whenever I want to take a picture or a movie the camera doesn't work.

It seems that the lense movement is jammed. Have you dropped the camera? just have a close look from the front side of the camera, does the lense assembly seems to be pressed or moved aside by some extra preassure? if no physical disalingment is vi ... Sony Cyber-Shot DSC-P72 Digital Camera

Olympus e10 problem. Even with new batteries, could only take a couple of shots before the low battery icon came up & camera shut down. Would work fine using mains supply. Fixed by buying new battery holder. Now 3 weeks later doesn't work again - low battery then switch off both using batteries or mains power supply. Any ideas appreciated as it's a great camera when working. Thanks

You didn't say what type of batteries you are using. Best are CR-V3 lithium which should give 500 shots. 2300 mAh Ni-MH rechargeable batteries should give 200 shots. Worst are alkalines which Olympus do not recommend. Have you checked the co ... Olympus Digital Cameras

I have a Kodak M1033 camera that I bought just over 6 months ago. I took it on holiday it worked fine and then suddenly it switched off. Since then it only powers up for about 5 seconds, shows a unfoc

I'm not sure why this works for me, but I think it's worth a try:1) First, take your SD card out of the camera.2) Then turn on your camera and let it turn itself off.3) Read the next step first and be ready to pres ... Kodak EasyShare M1033 - black Digital Camera

My camera will not power up. Was working fine the

The problem you describe is frequently the result of dirty/corroded\015\012battery contacts in the camera. Try removing the batteries and\015\012cleaning the inside contacts with a fine wire brush, steel wool, or\015\012fine sandpaper. Remove any r ... Kodak EasyShare Z1275 Digital Camera

I have Canon power shot S2 IS digital camera.I bought it around 2 years back.Now my camera is showing the sign of "change the batteries" even though the batteries are fully charged and the lens does not come out..When I tried the same batteries on other digicamera they are working fine. Very few times the camera starts working but after taking 2 or 3 pics the low battery sign appears on the screen.I use AA size NiMH Sony batteries. Can you let me know the solution to my issue.

I suggest replacing a fresh battery will most likely solve your prob, overtime rechargeable battery can drain easily, try changing with a new battery and see if it does work well, there might be insufficient current, thats why it tends to drop of vol ... Canon PowerShot A540 Digital Camera

I have a canon SD1100 I just purchased and after a few minutes the camera will not shut off, the power button won't work and I have to open the battery cover to turn it off. Somehow this completely drains the battery too every time even if it was just charged. Also the camera turns itself on by itself about 10 minutes after you put the battery in it and once again you can't turn it off. I got another battery and the same thing happens. Otherwise it works fine.

If this is a new camera, you should be running back to the store to return it. ... Canon PowerShot SD1100 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4052 seconds