Having problems with your Kodak EasyShare Z1275 Digital Camera ?

It will turn on, ask for date set, wheather you press yes or cancel it automatically turns off

Answers :

Make sure that you are installing a fresh/ full charge battery
\015\012Here are the steps:
\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.
\015\0122. Clean the battery contacts.
\015\012a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
\015\0123. Without the memory card,turn on your camera.
\015\0124. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.
\015\012Contact KODAK:
Repair Help & Product Troubleshooting for Kodak EasyShare Z1275 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

It will turn on, ask for date set, wheather you press yes or cancel it automatically turns off

Make sure that you are installing a fresh/ full charge battery\015\012Here are the steps:\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.\015\0122. Clean the battery contacts.\01 ... Kodak EasyShare Z1275 Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.

Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk

You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?

Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.

The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.

... Canon PowerShot S400 / IXUS 400 Digital Camera

I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?

... Canon PowerShot SX100 IS Digital Camera

Somehow I accidentally turned on the date stamp. I do not want dates on my photos! How do I turn this off? The manual only tells how to set it -- not cancel it.

IT's the same technique as the following video for SD600\015\012\015\012http://cnettv.cnet.com/quick-tips-sd600-date-time-to ... Canon PowerShot A590 IS Digital Camera

My HP photosmart R967 worked great until it said it was out of battery and shutting down. Now I can't get it to charge, and it won't turn on. Strange thing, when it's on its' little dock charger, it turns on to a screen asking you to set the date and time, then won't set it. My husband thinks it needs a new battery ---- help! I need my camera!

... Digital Cameras

Command dial on a friend's Fuji Finepix S9000 is NOT functioning. Can't control aperture, shutter speed, flash settings, etc. Can it be opened and fixed (he has no warranty, thus no problem with opening it). Is there a special setting or way of turning or pressing buttons that he is doing wrong? It says to press (and hold?) a button then twist the dial, but no change is made as far as I can see. I have tried enless things and have much experience (though I'd be a fool not to ask others). A

Hi. I just bought this exact model on ebay and it arrived with the same problem. I found many others with the same problem on various sites, but happened upon this extremely thoughtful man's album showing the steps to fix it. Thought I'd share with y ... Fuji FinePix S9000 Zoom Digital Camera

Camera Canon A710 IS started to ask set time date when turned on

When the camera is left without power for an extended period of time, the time and date settings are gone. You need to reset them and when you're finished, click the set/ok button twice. ... Canon PowerShot A710 IS Digital Camera

Everytime I turn the camera on, it's asks to set the time/date. No matter how many times I HAVE set it, it always comes on again. So to use the camera I have to always go thru the "do you want to set the date stuff" first.

---- This is a problem many Coolpix S710 owners have had and many have had a defective internal battery (it keeps the time and date). To see if yours is defective, fully charge the main battery, put it in the camera and let it set with the power butt ... Nikon COOLPIX S710 Digital Camera

My V603 instantly shuts off after I turn it on. The lens expands out then automatically goes in and the camera turns off. I replaced the battery and I can set the date & time & review my favorites but as soon as I try to take a picture - it turns off. Any suggestions?

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Kodak EasyShare V603 Digital Camera

When I turn on my camera it asks to set the date and time and then just says to PLEASE TURN CAMERA OFF AND THEN ON AGAIN. That's it. I cannot currently take pictures or retrieve any.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-FS3 Digital Camera

Ixus 80 IS - Won't save date and time Everytime I turn my camera on it asks me to set the date and time, the manual says it has an inbuilt battery (I don't think it is changeable), is there anything I can do ?

After setting the date and time, press the set/ok/menu (whichever one you press at the end) button twice. ... Canon IXUS 80 IS Digital Camera

The camera says. please set date and time and after i press ok. the screen will show, initialization error, please turn off camera and turn on again. what solutions should i make? thanks a lot!

Hey, I am having the same problem with mine! I asked the same question on here with no response. I have recharged the battery, reset the camera, and everything but i don't know what to do...do you ever figure anything out? let me know: [email protected] ... Nikon D40 Digital Camera with G-II 18-55mm Lens

KODAK LS753: when the camera is powered up the screen comes on to set date and time. The selector five way switch can move between set and cancel. When the switch is pressed straight in nothing happens. I was thinking there may be a hard reset somewhere on the camera to clear this glitch. Cycling the power does not change anything.

... Kodak EasyShare LS753 Digital Camera

Turn on camera and set date and time shows up

Take your camera apart and put a piece of electrical tape over the center button (ok) on the menu.Worked just fine for me after that. ... Kodak EasyShare CX7330 Digital Camera

My LCD goes partially black when I turn the camera on and shows a diagonal display of the photo from the upper left hand to lower right hand corners. The amount not black is not sufficient to take photos. I can make the LCD give a full display if I "jiggle" the photo settings devise from view to photo. I have tried this about thirty times and it always restores the LCD. I asked Canon Service Tech Support if the problem merited repair. Of course they said yes, but the flat rate they charge

Hi , i think you need a lens alignement;;\015\012and focus adjustemt\015\012hope that will help...\015\012goo lucks;;but if iw\015\012as in your place\015\012i will try to find another one the price get very low for this ... Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

Having problems with the settings not being save and is being ask the same questions about language,world location,date and time every time i turn on my camera

... Casio Exilim EX-S500 Digital Camera

I have a Sony Cybershot DSC-P92 and it always has been working properly untill today. When I inserted a fresh pair of charged batteries the powerlight immediatly comes on, even before I turned the camera on. When I press the powerbutton and the camera starts I have to re-set the date, which is odd. After that done and ready for use the flash doesn't go off and it starts beeping and displays an error message: E:91.01 Is this problem fixable or should I throw it out of the window (metaforica

Haven't I wanted to Throw it out the window before as well. That was a good chuckle but no you don't need to do that, what's happened is that the internal battery the one that keep the day date time and anything else programed into the camera alive w ... Sony Cyber-Shot DSC-P92 Digital Camera

When the camera turns on it comes to the date/time have been reset screen. I can highlight Set Date & Time and Cancel but pushing the button in doesn't do anyhting so i am stuck on this screen and can not use the camera. Any ideas on how to fix it?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Kodak EasyShare Z730 Digital Camera

I have a Kodak Easyshare Z812IS Camera and after I set the date and time and press ok the camera will turn off

Your problem may be due to weak/worn out\015\012batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anyt ... Kodak Easyshare Z812-IS Digital Zoom Digital Camera

I have a new PowerShot A580 and am having problems: 1. Every time I turn on my camera it asks for me to set the date and time. I've done it and saved it, but the same message keeps recurring. What can I do?

Replace this small battery near memory card:P it is hidden under a piece of plastic. it works like a battery on a mainboard - keeps clock alive. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3108 seconds