Having problems with your Kodak EasyShare Z12851 Digital Camera ?

I have a z1285 that will turn on for an instant and turn off again. I can not get it to stay on.


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare Z12851 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a z1285 that will turn on for an instant and turn off again. I can not get it to stay on.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Kodak EasyShare Z12851 Digital Camera

Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera

When i turn my camera on, it seems fine, all buttons functional. When i take a photo, it flashes, but no photo will pop up in my screen. Instead the screen stays black, and then the battery starts to get really warm. then i cant turn it on or off, the only way to get the batter to stop heating up, is to take it out of the camera. i can put the battery back in, turn it on again, but it will say no pictures had been taken, and the problem continues every time i try and use it. There is no history


FREE INFORMATION REGARDING YOUR CAMERA FIRST \012\012The Stylus Tough-3000 can be submerged up to 10 feet underwater and incorporates four preset underwater scene modes as well as the ability to capture HD movies underwater. It can also w ... Olympus TOUGH3000 Digital Camera

Started having a problem turning on. When i first bought the camera you turned it on and it was instantly ready to take a photo and instantly showed what you were looking at on the lcd. Since i connected to a computer and transfered photos when i turn it on it the lcd stays black for about 20 seconds before it shows what the camera is pointing at and allows you take a photos, Any ideas how I can rectify this? thanks


Sounds like you didn't use the"safely remove hardware" function when you disconnected the camera from the computer and caused a slight problem in the camera. If your pics are safely on the computer, go into the camera menu and find "reset" and follow ... Kodak EasyShare M530 Digital Camera

I have a Cyber-Shot DSC-W120. When I go to turn it on, the screen stays black and the lens just goes in and out, then I get an error message to turn off camera and then turn it back on. This is a new camera and I would like to get it fixed. What can I do to make it work?


Try Initializing the Camera. To initialize the Camera. First, press the Home button to display the Home menu. Then, select the Settings option in the Home menu. Then, select the Main Settings1 under the Settings option and set the Initialize under th ... Sony Cyber-shot® DSC-W120 Digital Camera

Dropped camera i dropped my camera and when i turn it on the screen looks cracked and it white! it looks broken on the inside. I have a polaroid i830. One day i dropped it on the floor, and it doesn't work now. If i push the power button on, the power light comes on, but the screen and everything stays off. I also can't get the light to turn off unless I take out the batteries. The screen appears to have a crack. Is there any way to fix it before spending to get a new one ??


My camera fell out of my pocket book and busted the door. I glued it. that worked for about 6 months. I need the door for it and it will be as good as new. ... Polaroid i832 Digital Camera

My camera out of no where has a problem loading to take a pic... it turn on stays on the blk cyber shot screen and opens lens then stays there and then i get a dialog box showing turn power off and on again i do and it does the same thing it s brand new no water damage nothing went from working to not


... Sony Cyber-shot DSC-W170 Digital Camera

When I turn it on, there is clicking and then a lens error. The lens cover stays open. I removed the battery and put it back in, and I still get the lens error, bu the cover closes when it shuts off. When I turn back on, clicking and lens stays open as before.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Nikon Coolpix S210 Digital Camera

My pentax optio E70L has just started giving me trouble by not staying on when I try to turn it on. I checked the batteries and they seem to be at full capacity I just get pass the first screen and then a little bit of the camera view and then it turns off but the lens stays open. Pleaswe help


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Pentax Optio E60 Digital Camera

CRACKED SCREEN dropped my camera and when i turn it on the screen looks cracked and it white! it looks broken on the inside. I have a polaroid i830. One day i dropped it on the floor, and it doesn't work now. If i push the power button on, the power light comes on, but the screen and everything stays off. I also can't get the light to turn off unless I take out the batteries. The screen appears to have a crack. Is there any way to fix it before spending to get a new one ??


You cannot repair the broken LCD screen; the white you are seeing is the backlight for it.\015\012LCDs have extremely thin gold deposits along one edge that is contacted by a silicone rubber strip that has fine wires molded into it vertically and one ... Polaroid i832 Digital Camera

Frozen Camera I have a Panasonic Lumix TZ3 digital camera. The last time it worked, the screen went checkered, so i turned it off. But upon turning it off, the lens of the camera stayed out like it was taking a picture. Now it won't turn on. I've tried recharging the battery, changing memory cards, no memory card, switching settings and turning the on/off switch. Is there anything to be done or I do I just need to get a new camera?


Try letting it drop about 4 tto 6 inches on a hard service covered by a paper towel. Don't let it land on lens of course. You can remove the mem card. It has 13Meg of internal. ... Panasonic Lumix DMC-TZ3 Digital Camera

Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera

Samsung s630 Wel It wont work with the memory card but with out it, it does they're 2 brand new and should word together. San disk sd card 2gb. When I put it in the camera turns on ok gets the lens out and then nothing happens the screan stays dark and no butons works. To get it working again I get the card out and the it works but not enough 9 pictures I want to be able to take more. What should I do ? please answer quick I'd like to used it soon ! Thank's Chela


About the memory cards to be used with this camera, those could be: - MMC / SD card (Up to 2GB Guaranteed)- SDHC card (Up to 4GB Guaranteed)\015\012Some cards are not compatible according to the memory cardmanufacturer a ... Samsung Digimax S630 Digital Camera

My panasonic lumix dmc-lz7 camera is not functioning. It turns on the zoom goes in and out and then displays the message "please turn camera off and on again" after doing this the zoom stays out. Turning it on and off again does not get it to work. Jessica


Battery might be weak and needs a replacement or there is improper shutting down. ... Panasonic Lumix DMC-LZ7 Digital Camera

The battery died during the summer... so the lens were left sticking out instead of going back in. it stayed that way for 2 months because i left it at my sister's house. when i got it back, it was still out and i got batteries and turned it on. when i turned it on, it went in halfway and when i turned it off it came out fully, the zoom wont go far either. how can i get it to go back all the way in. its stuck. dont know why


Purchase an alkaline battery and replace with the old one, power up, wait for some time, select slideshow option, then back to camera view then power down..wait for 1 minute, power up again test your zooming results, if it is working well then all is ... Samsung Digimax S630 Digital Camera

My Sony DSC-W100 says "Turn the power off and on again" but still wont take any pictures! The screen just stays black. Anyone know what is wrong with it and how much it will be to get it fixed?


Sir, u replace ur memory card ... Sony Cyber-shot DSC-W50 Digital Camera

My Sony DSC-W100 says "Turn the power off and on again" but still wont take any pictures! The screen just stays black. Anyone know what is wrong with it and how much it will be to get it fixed?


Took alot of dropping and banging but finally worked for me too. What I ended up doing was constantly rapping it with my knuckle very fast as it was opening and closing. Second set of doing that and bam, I've got a focus again. ... Sony Cyber-shot DSC-W100 Digital Camera

Switch glitch When i turn on my camera it goes off again within a few seconds (or maybe less). I have to turn it all the way off (slowly) and on again. Sometimes it stays on (at least long enough for a photo) and other times not. Has been getting worse so now the camera is pretty useless. I am presuming that the switch has had it (any other suggestions?) Interestingly while it was under warranty i had switch problems and it was replaced so this is the second switch on the camera. Is the switch a


I have the same camera and it does something very similar. I'm guessing it is not the switch but rather the internal battery for memory backup needs replaced. It is not a do it yourself repair nor is it cheap. One option you can try is to use the ... Fuji FinePix S5000 Digital Camera

My camera will not stay on. It turns on for about two seconds, the screen says Sanyo then shuts off. I took the camera apart to clean it and to make sure it didn't get wet and the problem still isn't resolved. The 3X optical zoom is also stuck out and when I turn the camera on, it sounds like it is trying to pull it back in but can't


If you actually took the camera apart, you may have damaged some components. You also might be the luckiest person ever and no damage was caused. In that case, try these:\012\012 ... Sanyo Digital Cameras

I have a Panasonic Lumix DMC LZ5. As soon as I take a picture the camera shuts off. I can turn it off and turn it back on again, but I cannot get the camera to stay on once I've taken a photo. Battery charge is okay.


The cameras circuitry has a capacitor that has grown very weak making the camera to do this. The repairs to correct this would outweigh the cost of the purchase of a new camera ... Panasonic Lumix DMC-LZ5 Digital Camera

My Canon Powershot SD 400 won't download photos to my computer. I have a brand new battery. When I connect the camera and turn it on my computer shows the device for a moment and tries to get the data. The camera turns off shortly after it is on (no blinking light). When I unplug the USB it stays on no problem. I also swapped another USB and took out the memory card and battery and put it back in again.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Canon PowerShot SD400 / IXUS 50 Digital Camera

Camera ran out of battery,whilst zoom lense out.Replaced with new batteries but now when i turn the camera on it bleeps for about 3 seconds and then goes off.I cant even get it to stay on long enough to bring zoom back.Please help as i really need to get this fixed for xmas.


Some batteries (especially the lower mAh rechargables) don't seem to have enough power. Try putting in a couple of brand-new (non-rechargeable) Duracells, and see if that helps. ... Rollei Digital Cameras

Got droped now when turn on get pink fuzzy lines in veiwing area may go away if tap on hand but by time try to focas gets fuzzy again.if stays clear still will take a good pic.


Because the camera has been dropped KODAK might determine this fault as Out of Warranty\015\012An Out of Warranty repair for this model for this fault is about 48 pounds + shipping. KODAK also offers a Trade up option where you will have the op ... Kodak EasyShare C533 Digital Camera

I have reset the camera and it still gets the error code 00000018-4489-957-000 when I try to turn it on. It will only stay on while it is connected to the power cord and only stays on for a second then shuts right back off?


I have checked HP references and they as you already know, have no data published for such an error code.\015\012\015\012If you have tried a new battery, and have no luck powering on the camera, I'm suspecting either a problem with the AC adapt ... HP Photosmart R727 Digital Camera

LENS STUCK DSC-W70, the camera turns on but the lens comes halfway out and just stays there and i keep getting message to turn camera off and on again, I have tried most of the soloutions offered such as tapping the camera, using compressed air but its still not having any effect, any more suggestions other than buying a new camera!


Hi\015\012\015\012What you are seeing is a generic message that means there is\015\012some sort of problem with the lens, it could happen in many different\015\012ways such as sand or dirt in the lens gears.\015\012\015\012A c ... Sony Cyber-shot DSC-W70 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2304 seconds