Having problems with your Kodak EasyShare Z710 Digital Camera ?

Camera turns on but on date is set it turns off.

Answers :

Here are the steps:
\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).
\015\0122. Clean the battery contacts.
\015\012a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
\015\0123. Without the memory card,turn on your camera.
\015\012Contact KODAK:
Repair Help & Product Troubleshooting for Kodak EasyShare Z710 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.

The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.

Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?

The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera

I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?

... Canon PowerShot SX100 IS Digital Camera

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.

... Olympus Stylus 770 SW Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.

To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

I just recently bought a kodak zd710. When i received the product, i turned on the camera and i was immediately prompted to set the date and time. Once i finished, the batteries that the camera came with had quit on me. So i went out and bought new batteries, and when i went to turn the camera on again, the LCD screen did not light up. It has yet to come on when i turn the camera on. Is there any kind of troubleshooting i can try?

Battery usually come with very little charge when new.You must first charge the battery before use the camera. ... Kodak EasyShare ZD710 Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.

... Canon PowerShot S400 / IXUS 400 Digital Camera

The camera will not turn on and the lens is still open. I have already put in different batteries. when I try to turn on the camera the blue light comes on as if the camera wants to come on.. the set date will pop up and the camera shuts off

Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).\015\012Here are the steps:\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.\015\0122. Clean the batter ... Kodak EasyShare Z1275 Digital Camera

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk

You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

Set date and time comes up every time i turn on camera

Try resetting your camera. In picture taking mode press menu. Go to setup, go up to reset, press right arrow, make sure reset is highlighted and press set.Then TAKE OUT MEMORY CARD. Go back into menu, go to setup, go up to format, pres ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Everytime I turn the camera on, it's asks to set the time/date. No matter how many times I HAVE set it, it always comes on again. So to use the camera I have to always go thru the "do you want to set the date stuff" first.

---- This is a problem many Coolpix S710 owners have had and many have had a defective internal battery (it keeps the time and date). To see if yours is defective, fully charge the main battery, put it in the camera and let it set with the power butt ... Nikon COOLPIX S710 Digital Camera

I just set the date stamp in the on position. Then, turned the camera off as I didn't need to take a picture. Now, when I turn it on, the lense comes out and then immediately goes back in flush and the camera is in the off position. The battery is fully charged and the camera even does this when I have it on the charger.

Hi,How long have you owned the camera? If under a year then I would recommend having it serviced by kodak under warranty. If it's over a year old you may want to try a new battery otherwise consider replacement.Thank you,Lee ... Kodak EasyShare V1003 Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.

Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

The date and time will not stay set. I set the date time . take pictures and when I shut the camera off. the next time I turn it on the date and time is zeros again...

The world of compact digital cameras is fast and furious blink and you'll miss the new model. These pocket point and shooters are cram packed full of features that most people neglect to utilize. So it's uncommon for the problem you describe to occur ... Canon PowerShot A710 IS Digital Camera

Set date and time comes up every time i turn on camera

The date time is controlled by another 'button' type battery in the camera- like a watch battery, there 'go' in time.This is not a 'user' fixable item usually because it mean dismantliing the camera.Sending away will be pricey- well on th ... Sony Cyber-shot DSC-W55 Digital Camera

I turn my camera on...it lets me set the date and

Batteries: are you using Li ion batteries that are charged up? ... Kodak EasyShare Z612 Digital Camera

Settings My camera will not keep the settings.  When the camera turns off I have to reset the language, place, date, time, etc.  Can this be fixed?

Give the following a try:How do I maintain the settings when I Power ON/OFF my Casio digital camera? Turn the camera ON and switch to REC. Press the MENU button. Using the controller, scroll to the Memory tab. ... Casio Exilim EXZ75 Digital Camera

The camera says. please set date and time and after i press ok. the screen will show, initialization error, please turn off camera and turn on again. what solutions should i make? thanks a lot!

Hey, I am having the same problem with mine! I asked the same question on here with no response. I have recharged the battery, reset the camera, and everything but i don't know what to do...do you ever figure anything out? let me know: [email protected] ... Nikon D40 Digital Camera with G-II 18-55mm Lens

When I turn on my camera it asks to set the date and time and then just says to PLEASE TURN CAMERA OFF AND THEN ON AGAIN. That's it. I cannot currently take pictures or retrieve any.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-FS3 Digital Camera

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?

Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

My HP photosmart R967 worked great until it said it was out of battery and shutting down. Now I can't get it to charge, and it won't turn on. Strange thing, when it's on its' little dock charger, it turns on to a screen asking you to set the date and time, then won't set it. My husband thinks it needs a new battery ---- help! I need my camera!

... Digital Cameras

My camera turns on, set date and time screen comes on, then once im done setting time it turns off

... Kodak EasyShare M1033 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3057 seconds