Having problems with your Kodak EasyShare Z712 Digital Camera ?

Changing the battery resets my date. is there another battery

\015 My camera all of a sudden resets to the default date when I change batterys. Is there another battery I can change to fix this? and if so where is it???\015

Answers :

Your camera doesn't have internal battery so everytime you change the battery it will ask you to set the date...
Repair Help & Product Troubleshooting for Kodak EasyShare Z712 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Changing the battery resets my date. is there another battery


Your camera doesn't have internal battery so everytime you change the battery it will ask you to set the date... ... Kodak EasyShare Z712 Digital Camera

When ever i change batteries i have reset date. taking batteries out even for a few seconds the date and time has to be reset


... Kodak EasyShare CX4200 Digital Camera

I have had my S9600 for 4 years, for most of that time, when i changed the batteries, all my settings remained the same. Now, when i change the batteries, every setting has returned to factory standard (stupid beeps and whirring noises, no date etc) and i have to reset everything. The user manual has no mention of an internal battery, but i figure there must be one and it now needs replacing. How do I do this?


My camera has refused to power up despite fresh batteries - I have had no response. I left it overnight as suggested in the manual - but still nothing. It hasn't been used for a few months and was left without batteries for fear of leaking. Any ideas ... Fuji Finepix S9600 Digital Camera

Samsung S630 date gets reset while changing the batteries


It is really NORMAL that the date will be reset to the Manufacturer's date whenever you are changing batteries.\015\012\015\012For you not to keep on changing the date and time of your camera, use Rechargeable batteries for a longer batte ... Samsung Digimax S630 Digital Camera

Every time I change the battery on the coolpix 995 I have to reset date and time and all other settings. I never had to do this with my 990. How do I keep all settings , including film quality , unchanged during battery change?


Your problem is that your camera actually has two batteries. There's the obvious user-accessible one but there's also a tiny rechargeable one hidden inside the camera which recharges from the main battery. The smaller battery is designed to provide h ... Nikon Coolpix 995 Digital Camera

Cannon 5 D, Shuttle want work, when putting the battery in the red light want come on. Top display shows information. I change the time and date battery, I also took both batteries out to reset. Nothing


I packed it up and mailed it to a service company. ... Canon Digital Cameras

When battery is changed date and image size need resetting


These units have a small internal battery, similar to a coin cell used in hearing aids, except that it has solder tabs so it can be mounted to the pcbd. You need the internal battery changed. ... Fuji FinePix F700 Digital Camera

How to set time & date . I changed batteries. I need to reset time & date


Hi,\015\012\015\012To set the Date/time on your camera, kindly use these steps:\015\012\015\012Turn on the camera.\015\012Press the Menu button.\015\012If you s ... Kodak EasyShare C633 Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?


The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

I cant seem to change the date and time on my recently purchased Insignia Model NS-DSC1110A. There appears to be no options within the menu mode, only to add date and time to photos taken so I removed the batteries, removed the SD card, lookd for a reset button, nothing seems to work. HELP!!


Open the menu, and navigate to the middle icon, then down to "simple mode". Turn off "simple mode" to show all menu options ... Insignia NSDSC10A Digital Camera

Kyocera M410 resets date and time when changing batteries


There are tiny Li batteries to maintain the short term memory for interim period. Normally they last very long but unexpected can be expected. You may not have enough tools to open it & reach there. Either go to camera repair or just entering it ... Kyocera Finecam M410R Digital Camera

Kyocera M410 resets date and time when changing batteries


... Kyocera Finecam M410R Digital Camera

Thank you shockwave727! I forgot to mention that having to reset the date and time everytime the battery is replaced wasn't an issue before. We would replace it and keep on going. As for the picture display time, that was great advice, never thought of that! Will change it right away. Thanks!!


Your welcome Sir. ... Kodak EASYSHARE V1253 Digital Camera

Hi today i recieved my FujiPix S4000 camera, after putting in the date and time, it then pops up, turn off the camera and turn on again, which i have done several times, along with changing the batteries supplied with it to rechargeable ones like it says it only takes in the manual, i have also tried resetting it, and trying various sim cards other than the one supplied. Butr it keeps popping up everytime i turn it on.


... FUJIFILM FinePix S4000 / S4050 Digital Camera

Had my Canon 490 about a year and now the date and time has to be reset every time I turn it on. Is there another backup battery I don;t know about?


Okay .... so I have been having the same problem and called Canon.. Apparantly, there is a time battery in our cameras. It is a CR1220 and when you open up to where your batteries are, you will see it. You can get it out with your finger nail. Hop ... Canon PowerShot A490 Digital Camera

Every time I switch it on it asks me to reset the date and time settings. The batteries are fine and I don't recall changing any setting to make it do this.


On the left hand side of the camera there is a little batter hatch, above a screw hole. It has a number written on it. Pull this out and replace the battery in it. This is the time and date battery. ... Canon PowerShot SX100 IS Digital Camera

Time & date must be reset every time the batteries are changed.


Internal clock battery exhausted,replace need. ... Pentax *ist DS Digital Camera

My wife's Kodak Easyshare V1253 has to be reset (date and time) every time we replace the battery. What could the problem be? Also, it takes too long to take one picture from another (probably setting regarding display time). Other than that, great camera!


Regarding the date and time, Actually its normal everytime you removed the battery you need to reset the date its is because the camera doesnt have a internal or built-in battery that can run the internal clock or maintain the date settings., ... Kodak EASYSHARE V1253 Digital Camera

Everytime I change the battery I need to reset the date and time


... Kodak EasyShare Z1012 IS Digital Camera

The internal battery is dead... how can I change it? where is it located? every time I turn it on, I have to reset date and time....


... Nikon Coolpix 4100 Digital Camera

December 31/09. I moved from the MST zone to the PST zone. On the atomic clock I moved the button to change the zone. The clock seemed to work as it should for about 10 days. It is now late December and suddenly the date changed to the new year about December 26. December 30, I decided to change the batteries. The date changed to Tues Jan 1, with the time completely out of whack. Temperature seems accurate but I cannot figure out how to change the date and time. It has date and time butto


You can get the manual on link below. You need model # though.\015\012\015\012\015\012http://www.skyscan.info/content/manuals.html ... Sharp Digital Cameras

Each time I remove the battery from my Nikon CoolPix 4300, the clock returns to a default of 2002 (in the LCD window the date shows as 000000. Each time I use the camera I have to reset the clock and date. I left the battery in the camera over night to see if the clock battery would take a charge and maintain the date and time the next time I removed the battery. No such luck. It returns to default. Is this a problem I can correct on my own?


Go to the support section of the Nikon website and e-mail one of their tech people with your problem...I'm sure they can solve it. ... Nikon Coolpix 4300 Digital Camera

Each time I remove the battery from my Nikon CoolPix 4300, the clock returns to a default of 2002 (in the LCD window the date shows as 000000. Each time I use the camera I have to reset the clock and date. I left the battery in the camera over night to see if the clock battery would take a charge and maintain the date and time the next time I removed the battery. No such luck. It returns to default. Is this a problem I can correct on my own?


I probably need more details but, it sound like when you remove the battery to recharge it, the clock loses any power it had. Most people have a second battery. When the first battery begins to lose power, they insert the fully charged battery so the ... Nikon Coolpix 4300 Digital Camera

The date will not stay on my canon powershot sx100 IS camera. I have changed batteries but still nothing


Replace the date battery as described on page 191 of the manual. ... Canon PowerShot SX100 IS Digital Camera

Loss of date and time on battery change


This is not a solution, however I have the very same problem, and as previously described, the problem have started recently after about two years. What make me think that there is an additional internal battery which died, similar to a PC battery th ... Fuji Finepix S6500FD Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1852 seconds