Having problems with your Kodak EasyShare Z740 Digital Camera ?

My camera fell down ,after that i am facing the problem of lence auto in and out system when i switch on the camera.

Answers :

What can I do to fix this
You have jammed the lense or broken the motor works in the camera
Repair Help & Product Troubleshooting for Kodak EasyShare Z740 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera fell down ,after that i am facing the problem of lence auto in and out system when i switch on the camera.

What can I do to fix this ... Kodak EasyShare Z740 Digital Camera

Camera stalling The problems started after using my camera on a windy day at the beach 3weeks ago. After a few days, the lens started getting stuck, and wouldn't come out, or if it did, didn't focus properly. This problem was intermittent. Then, in the past several days, the camera systems stall when I switch it on. The lens comes out and zooms fully. but It will not respond to any of the control buttons. Which part of the camera is the problem? is it fixable? How much is the estimated cost of r

This problem is related to your lens , because even if the lens extend fully and for the past things that happened on the camera there's a big chance that some dirt get in to the camera that causes the problem. What you can try first is to take the b ... Panasonic Lumix DMC-FX7 Digital Camera

I have a canon xl2 camera which is presently at an event that my company is supplying equipment for. the camera is experiencing intermittent video output to our video switching system (which is new and we have thoroughly gone through with a factory tech and has been eliminated as being part of the problem). We have replaced the bnc cable connecting the camera to the switcher and it should also be noted that we have added an amplifier to the cable run but that has not eliminated the problem. The

Ok...I suspect that its something wrong with the BNC out...to see if this is the problem ...try to connect it using the IEEE1394... (firewire) .directly to a pc ...or so ...the driver should not be a problem ... cause the camera its very common ...an ... Digital Cameras

The camera switches on fine - will take a pictur/ review - but then requests that the camera bes witched off/ on- do that - screen message appears system error [o.i.s]. Happened to try the camera with out memory card [ SanDisk ultra 8GB] - works fine! - tried another cars [same model] from another camera - same problem! any ideas gratefully received

The problem is isolated when there's a memory card in the camera, is it right? Are you using a brand new memory card? What type of card is it (SD, MicroSD, MiniSD)? If it's brand new, you need to verify with the manual if the camera could ... Digital Cameras

Hi, I had a problem with a Sony video camera (HDR-CX6EK) in 2009. The problem then was that the LCD screen interferes when unfolding the screen and when the screen was unfold completely the voltage of the device fell away. They changed 6 parts: 3 for the panel section (MCBRD CK-178, PCBRD FP-737 FLEX, SWITCH BLOCK CONTROL) and 3 for the voltage section. Last week during my vacation i had exactly the same problem as before and I didn't film that much since 2009. Could it be the same p

This is normally the failure of the strip membrane that connects the display unit from the main board . This strip has been replaced before according to your data as the FLEX. \015\012Now this failure for the membrane line is quite common for a ... Digital Cameras

Switching off I have four older digital cameras (Olympus, HP, Oregon and Vivitar) and they're now all doing much the same thing. That is switching off as soon as they're switched on. The problem has come on progressively over a few days with all of them so it seems like a virus. I download images directly into a Windows XP system.

... Hitachi M2 Digital Camera

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste

The following blog outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/ ... Nikon Coolpix 3200 Digital Camera

Dear sir/miss i have a problem with my benq camera when i switch it on it says system error 011 and it turns off again!!can you tell me how to arrange this problem 10x!!!

... BenQ DC X735 Digital Camera

I have some problems with my new G11. During first photo walking after 2 ours of working I met problem with system. When I use any button (except shutter) on screen appears menu of light lamp and active area blinking back and forward, I can't stop it. When I open viewer to see my photos then after use any button it started to scroll trough all pictures in memory and I also can't stop it. help to stop it is only to switch off camera or use shutter. Could you help??

Have you really spent any time reading the owner's manual? ... Canon PowerShot G11 Digital Camera

I recently bought a Canon powershot SX200is and I was using it to photograph my 4 year old grandson's birthday party, however a lot of the shots were blurred, these were mainly taken indoor, when I checked the camera settings I found the speed settings were ranging from 1/60sec to 1/6sec. I was shooting in P and AV, however I then switched back to automatic (auto) and took shots with the full range of options and still found some shots blurred, I think the problem is, the camera is trying to foc

I don't know your camera but on my fuji there is a setting that changes the "film speed". If it is set too low such as 100 or 200, it will make the exposure take too long causing blurry photos. The higher the number, the faster it is. Wor ... Canon Digital Cameras

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a pro ... Nikon Coolpix 885 Digital Camera

When the camera switches on it immediately closes the lens and a message appears stating "system error S0051" Is this problem fixable or is the camera scrap.

Hi.System error S0051 means that the camera cannot control the lens anymore. When this happens the camera usually is not able to focus anymore.The camera must be taken apart by a technician... unless you want to ri ... Konica Revio KD-400Z Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in

Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

My sony camera fell down and now when i switch it on, it does but for 2 seconds and automatically switches itself off. Could you please tell me what the problem might be? Many thanks Almaas

Your camera has a lens error. This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. ... Sony Cyber-shot DSC-S750 Digital Camera

When I try and connect my camera to computer using the usb cable it shows a screen which says 'usb mode connecting.... Switch on [menu]. I go to menu and have 3 options auto mass storage and pictbridge. I have tried all of these options but no joy. Most strange as problem has only just started and have downloaded loads of photos previously.

Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Sony Cyber-shot DSC-T70 Digital Camera

I have a Canon PowerShot SD100 Digital ELPH. With mode switch on auto, manual or video, no image appears in the display panel. Instead I see wavering lines of light. Can I solve this problem myself, or must I take the camera to a repair facility? If so, where can I take it? I live in Gurnee, Illinois, about 40 miles north of Chicago.

Hello!\015\012\015\012Thats problem is lessen the connection of the lcd. Only the service center can repair that issue. should you contact the vendor of your camera and tell them what exactly the problem. they can tell where is the neares ... Digital Cameras

Not a problem with the camera but the Samsung Master photo editor that came with it . Been working great for two years but now when I edit a pic and try to close it and select another I get an error message "Other system is busy" . Gives me the option to "switch to " or "retry" but neither option does anything . Tried uninstalling and reinstalling but it didn't help .

Sounds like a computer problem....for example, insufficient RAM. ... Samsung BL103 Digital Camera


Lens is dead, probably killed your camera too.\015\012\015\012Wires sticking out usually indicate a problem.\015\012\015\012Try getting it serviced would be my best suggestion, get them to checkout the caps lock key on your ke ... Nikon D70s Digital Camera

I have a Canon Powershot SD600 that downloaded images flawlessly into Photoshop CS on a Window 2000 operating system. Since I have switched to Windows XP I have had nothing but problems. I have the camera driver installed, Photoshop is importing the device, but when selecting the image it won't download. Any ideas?

It's very hard to troubleshoot software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place? Please see the following blog article, as it describes the use of a card reader as a muc ... Canon PowerShot SD600 Digital Camera

Lens problem Camera fell down and the lens is stucked. tried to switch it off and on again , but nothing is working , please help urgently ////

The lens mechanism would seem to be damaged in some way.There is normally no repair solution with this sort of thing because of the fine mechanism involved.If you have someone you know who can work with fine instruments to take it t ... Sony Cyber-shot DSC-W110 Digital Camera

My Panasonic DMC-ZS7 digital camera has a system error (Focus) problem and noticed that the lens or barrel does not zoom out all the way when switched on. Please help

Hi there please follow the steps and let me know the result.\012\0121. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.\012\0122. Look carefully between the lens and the camera bo ... Panasonic LUMIX DMCZS7 DMCTZ10 Digital Camera

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t

I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

Focus There is one problem that I have with this camera - Auto Focus in low lighting and it has really limited manual focus. Outdoors this camera is outstanding, I haven't found any pitfalls outdoors yet. 10x optical zoom plus 2.5" LCD WOW. Although the LCD is littly choppy, but I don't care about that, pictures turn out really gooood. Anyways back to Auto Focus problem. Do any of you have the same problem? Or this is my ability problem? That limited manual focus really bugs me! I'd like to hear

I have similar problem. So I use manual focus (1m,3m,inf) & move camera for finest pix. On AF, the adjustment seem to go past sharpest image point but settles on a fuzzier setting. Is there any place that can make a repair? ... Toshiba PDR-M700 Digital Camera

My D70 (which I just bought on ebay) is having problems with AF. At time the AF works fine but then for no reason it refuses to work for hours to days. I have two bodies so I can swap lenses to see that its not the lens. If I switch to manual focus, it the camera works fine. I can see the little pins around the lens fitting retract when I switch the camera to manual. Seems like a problem with the internals that control AF. No other problems are apparent to me. Any suggestions?

Sounds like a contact issue - either they are not making consistently or they are just dirty. I'd start with a good contact cleaner (Radio Shack or photo store) and spray the snot out of both the camera contacts and lense (making VERY sure to protec ... Nikon D70s Digital Camera

Autofocus problem I dont really know how to explain my problem.. I got a Nikon D40 for Christmas last year and last week we went on vacation. The camera was working fine. but suddenly the camera wouldn't auto focus. Everything is set on auto.. I only have the lens that came with the camera. The battery is charged.. it doesnt even make a noise like its trying to focus. the wiewfinder bracket thingy lights up red but nothing after that. I am new to photography so I know I probably sound like

You have to hold the shutter\015\012down halfway as you compose the first shot so the AF system can focus\015\012and lock, and then the camera fires instantaneously when you press the\015\012shutter the rest of the way. ... Nikon D40x Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4948 seconds