Having problems with your Kodak EasyShare Z760 Digital Camera ?

Cannot set date and time or move off that screen

\015 The "date and time has been reset" stays on the screen. Nothing happens when I press the OK or Cancel button. It has a fully charged battery,\015

Answers :

The joystick switch is easy to break when putting the camera on it's back. The switch is soldered to a small circuit board and the pins brake. Sometimes the inside of the switch breaks also. The card is fairly easy to replace if you can get one. Try Ebay. There are also individuals like myself that can replace that card for around $20 and $5 shipping.
Repair Help & Product Troubleshooting for Kodak EasyShare Z760 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cannot set date and time or move off that screen


The joystick switch is easy to break when putting the camera on it's back. The switch is soldered to a small circuit board and the pins brake. Sometimes the inside of the switch breaks also. The card is fairly easy to replace if you can get one. Try ... Kodak EasyShare Z760 Digital Camera

Caamera just does not work - open shutter, batteries flicker etc. but screen blank. Use OK button and get all the settings, time date etc. bu cannot take photos? Help!! Have had camera for long time, great piece of kit - nthis happened out of the blue


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Olympus Camedia C-1 Zoom Digital Camera

KODAK LS753: when the camera is powered up the screen comes on to set date and time. The selector five way switch can move between set and cancel. When the switch is pressed straight in nothing happens. I was thinking there may be a hard reset somewhere on the camera to clear this glitch. Cycling the power does not change anything.


... Kodak EasyShare LS753 Digital Camera

I have just bought the Kodak M381 camera and when I set the date and time and click ok, the time is set but does not display on the LCD screen at any point, so when I review my pictures there is no way of knowing when I took them. You can date the pictures retrospectively but that takes time and will be incredibly tedious and you soon forget. In the manual it says to select the date time stamp but I am unable to find it in my set up menu and I'm beginning to think this camera does not have this


I had the same problem. I think the camera does not have this feature, to bad it was a nice camera ... Digital Cameras

The Coolpix L4 forget its date-time settings, and there is no way to set them. menu -> set up (ok)-> date (ok)-> date (ok)-> ... the result is "Time Zone" setup screen not the date.


Hi.\015\012\015\012\015\012Nikon cool pix settings are saved into an internal memory (20 MB EEPROM I think). \015\012\015\012\015\012The internal memory is kept alive by an internal rechargeable battery, that is r ... Nikon COOLPIX L4 Digital Camera

December 31/09. I moved from the MST zone to the PST zone. On the atomic clock I moved the button to change the zone. The clock seemed to work as it should for about 10 days. It is now late December and suddenly the date changed to the new year about December 26. December 30, I decided to change the batteries. The date changed to Tues Jan 1, with the time completely out of whack. Temperature seems accurate but I cannot figure out how to change the date and time. It has date and time butto


You can get the manual on link below. You need model # though.\015\012\015\012\015\012http://www.skyscan.info/content/manuals.html ... Sharp Digital Cameras

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.


The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.


I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera

I sent the first one back because i thought it was the camera but the new one is doing the same thing. something about setting the time zone is messed up. it will not set to the proper am or pm. if i set it at 4:30 in the afternoon the time zone time will state 4:30 a.m. and when i exit out to the main screen the time on my camera will have then changed to a.m. instead of p.m. also you cannot set the clock in the camera to 12 a.m. anything. there is no 12 on the a.m. choice of the clock. it will


... Samsung L200 Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.


To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

Joystick not working. The cam turns on and prompts for date and time to be set. The only thing I can get it to do id to move the curser up and down. I can't slect anything to continue to set the date & time. I opened the cam and found that I can replace the button if I can find a replacement. Thank you.


To reset the date connect Camera to PC. Open Easyshare Software, Go to Tools and Select SYNC. This will usually set the Camera Time/Date to the PC Time and Date. I have the same problem,(DX7630) cannot Move to the Right or use the Enter on Joy Stick ... Kodak EasyShare DX7630 Digital Camera

I've had the 5700 since 2003, which at the the time I paid $1200 for it. E-Bay is now selling for a bid of $85. At any rate, I cannot manipulate the menu to make any settings. I have a flashing update icon for date & time, but cannot set. Also, the zoom control is unresponsive. I have no idea where to get an estimate for a repair & let's face it, the repair would probably cost more then what I can purcahse a new digital SLR camera for with more features than what I paid for the 5700. Any correct


This link will guide you for free estimates of reparing the camera.if its worth reparing after getting the estimate get it repaired.if its costly you can go for new.for reparing estimates cost of camera ... Nikon Coolpix 5700 Digital Camera

Good Morning; My favorite grandson was playing with my Fugi FinePix S700 and now I cannot get the thing to work. Batteries are fine and fully charged. I cannot get the camera to view the picture I wish to take. All I can get on my wiew finder is the screen with the crosshairs. The camera is set on Auto mode. I wish to know how to get the camera to take pictures again, has there been a setting moved or something ?? Thx in advance for your help, FYI, I cannot find my owners manual and ma


Hello, thank you for choosing Fixya for your Tech support. First , here is the link to your manual.. You can print it out if you like. http://www.siue.edu/lovejoylibrary/avs/pdf/FUJIFILM_DIGITAL_CAMERA.pdf Now fo ... Fuji FinePix S700 Digital Camera

The view finder or screen are black. The lens moves out when the camera is powered on, I can hear the shutter click when pushed; the telephoto is moving; I have all the settings show on the screen when the camera is powered on but I cannot see anything through the view finder or on the screen and no image is captured when a pic is taken. I changed the batteries and it made no difference.


I know it may sound like the shutter is moving, but you're going to have to actually look down the lens barrel to confirm it's actually moving, and not just producing a sound effect from the camera. Also keep in mind Canon's SX IS series cameras are ... Canon PowerShot S3 IS Digital Camera

Camera hangs I cannot use the camera, every time I open it the screen is blank and the green light is lit on and cannot turn it off, there are times that I can use it but can only take only one snapshot and the camera hangs. I even removed the small battery a CR1220 and return it so I have to adjust the time setting, as I change it the camera hangs also. I'm using a NiMH battery.


Well done ! It sound like a bad contacts issue. ... Canon PowerShot A400 Digital Camera

Cannot set time and date


... Fuji FinePix F460 Digital Camera

My camera turns on, set date and time screen comes on, then once im done setting time it turns off


... Kodak EasyShare M1033 Digital Camera

I set the correct date and time, but it does not display on the screen nor the photos. how do i get the date & time to appear on photos?


The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to pr ... Canon PowerShot A480 Digital Camera

Some sort of problem with internal memory / battery? Each time I turn on the camera now it cannot remember basic settings like date etc and I have to select date and time before I can take a shot... Any ideas?


The internal battery needs replacing this is a circular battery . ... Sony Cyber-Shot DSC-H1 Digital Camera

How do I get the date and time to show up on either printed pictures or on my downloads onto my home computer? I have set the date and time but it doesn't show up on anything, even my cameras own screen.


The date and time plus a lot more information is stored with each picture as "metadata". It can be retrieved in most photo editing programs. After downloading to your computer, if you just right-click on a picture file, the date and time will appear. ... Sony Cyber-shot DSC-N2 Digital Camera

Cannot set date and time on fuji finepix s2980


See pages 14 and 96 of this manual. ... Fuji FinePix S2980 HD Digital Bridge Camera

Can't access date and time set screen


Hello Sir ... HP Photosmart C912 Digital Camera

On y coolpix s220, upon powering up, the screen freezes on the "Set time and date?" screen.


Hi,The signs you mentioned are clearly suggestive of an internal problem with the electronic circuit. The only 2 options you could try that might help :-1. To\015\012 do such reset, turn on the camera and hold the menu b ... Nikon Coolpix 2200 Digital Camera

When the camera turns on it comes to the date/time have been reset screen. I can highlight Set Date & Time and Cancel but pushing the button in doesn't do anyhting so i am stuck on this screen and can not use the camera. Any ideas on how to fix it?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Kodak EasyShare Z730 Digital Camera

My HP photosmart R967 worked great until it said it was out of battery and shutting down. Now I can't get it to charge, and it won't turn on. Strange thing, when it's on its' little dock charger, it turns on to a screen asking you to set the date and time, then won't set it. My husband thinks it needs a new battery ---- help! I need my camera!


... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2650 seconds