Having problems with your Kodak Easyshare Z812-IS Digital Zoom Digital Camera ?
I have a Kodak Easyshare Z812IS Camera and after I set the date and time and press ok the camera will turn off
Your problem may be due to weak/worn out\015\012batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the\015\012batteries and wipe the camera contacts firmly with\015\012a dry cloth (heavy corrosion may require cleaning with a wire brush,\015\012steel wool, or sandpaper). Remove any residue that may have fallen\015\012into the battery compartment during cleaning, then wipe both ends of\015\012the batteries and place them back in the camera. This cleaning clears\015\012the problem about 90% of the time. If it doesn't work for you, your\015\012batteries may be to weak/worn to properly power the camera, or the\015\012camera may require professional repair.
Repair Help & Product Troubleshooting for Kodak Easyshare Z812-IS Digital Zoom Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a Kodak Easyshare Z812IS Camera and after I set the date and time and press ok the camera will turn off
Your problem may be due to weak/worn out\015\012batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anyt ... Kodak Easyshare Z812-IS Digital Zoom Digital Camera
Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera
Recently, i've been having an issue with my Kodak Easyshare M883 camera Every time i press the power button, the camera turns on, makes a weird noise, zooms in and out to refocus, makes the noise again, then completely shuts off. Its done this every time i turn it on for about a month now. I am completely able to review my pictures, let alone take any. I've tried plugging it into the computer, and even charging it overnight. please help me.
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare M883 Digital Camera
I have recently purchased a replacement usb cable that connects to my kodak easyshare m753 camera. I plugged the cable into the camera and into the front usb port on my computer. However, i cannot get the camera to turn on. When it is plugged in an I try to press the on button, it'll flash green one time. Then when I try to turn it one when it is unplugged, it does nothing.
Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak Easyshare M753 Digital Camera
My sister recently gave me her old Kodak easyshare m1033 camera, which is nice because i have a lot of use for it. At a recent concert of a friend of mine's, I was taking pictures and the camera died with the lens stuck in the out-position. I didn't think much of it and decided I'd bring it home and charge it and then retract the lens. However, when I tried to charge it (I charged it for 12 hours straight, multiple times), it turns on for 1-2 seconds displaying that the date and time have been r
Try this: remove the card and battery...press every button...leave it alone for 20 minutes...insert the card and then the battery...turn it on. If that doesn't work, try these:\012\012 ... Kodak EasyShare M1033 - black Digital Camera
I have a Kodak Easyshare M1033. When my camera turns on it wants the date and time set and none of the buttons work!
HELLO SIR turn it on , Press Reset Buttonùturn it off , still pressing The switch on button 10 secondsIt works for me ... Kodak EasyShare M1033 Digital Camera
How do i turn off the date on my kodak m863 camera. I turned it on a long time ago and it won't give me an option to turn off the date and time. HELP!?
HI there press the menu , then scroll down for setting option . From setting you can find the date & time on/off option. Select from there as per your choice & use that. Thanks & waiting for your feedback. ... Kodak EasyShare M863 Digital Camera
I just recently bought a kodak zd710. When i received the product, i turned on the camera and i was immediately prompted to set the date and time. Once i finished, the batteries that the camera came with had quit on me. So i went out and bought new batteries, and when i went to turn the camera on again, the LCD screen did not light up. It has yet to come on when i turn the camera on. Is there any kind of troubleshooting i can try?
Battery usually come with very little charge when new.You must first charge the battery before use the camera. ... Kodak EasyShare ZD710 Digital Camera
Problematic Camera I have a EasyShare DX4530 which has suddenly started acting funny. Here's the sequence of events: - power up works fine - lens comes out ok - green light glows steady, ready for a picture - picture takes fine - green light doesn't turn on again - no amount of pressing the shutter button will bring the green ready light back - pressing the SHARE button a couple times (sometimes 2, 3, even 4 times) will move thru the share sequence and then finally exit that function, turning
I just discovered that the real problem is a STICKY SHUTTER BUTTON, staying down after taking a picture. This prevents the green ready light from coming on until I jiggle the shutter button. It has actually started to be hard to press, making a defin ... Kodak EasyShare DX4530 Digital Camera
I'm looking for a customer service email or phone number i can contact about a broken camera that was purchased less then a year ago. its the second Kodak easyshare camera i have purchased with the same problem both times. the lens will not return back into the camera and the camera itself attempts to turn on but will not. i was told there is a 1 year warrenty on the camera through Kodak when i had returned to the store where i had purchased it. any suggestions?
Connect an AC adaptor and try again ... Kodak EASYSHARE M1063 Digital Camera
Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk
You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera
I have a Kodak EasyShare Z1485 IS, the lens barrel is stuck in the furthest extended position. It was left alone and not operated for several months, though I have replaced the battery. The camera turns on for about 3 seconds at a time, I tried to turn it on several times with the lens barrel inching forward each time. It stopped going forward and has become stuck in what appears to be the furthest-extended position.There does not appear to be any particulates obstructing the lens barrel as far
Your camera almost certainly has a lens error ... Kodak EASYSHARE Z1485 IS Digital Camera
The camera says. please set date and time and after i press ok. the screen will show, initialization error, please turn off camera and turn on again. what solutions should i make? thanks a lot!
Hey, I am having the same problem with mine! I asked the same question on here with no response. I have recharged the battery, reset the camera, and everything but i don't know what to do...do you ever figure anything out? let me know: [email protected] ... Nikon D40 Digital Camera with G-II 18-55mm Lens
Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?
Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera
My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?
\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera
I droped my Kodak EasyShare V1253 camera on ice and the lense bent and now when I turn it on it turns off or some times turns on but cant Turn off Until I take the battery out of it. Is there any way I can fix it Many Thanks Namless
Hi, i suggest you bring the cam on a certified technician for you may damaged sensitive parts on doing this, it requires special skills. ... Kodak EASYSHARE V1253 Digital Camera
My Kodak Easyshare M341 camera won't turn on and when i push the on button the battery light turns green and then it blinks red about five times and then it still won't turn on, what going on?
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Digital Cameras
My wife's Kodak Easyshare V1253 has to be reset (date and time) every time we replace the battery. What could the problem be? Also, it takes too long to take one picture from another (probably setting regarding display time). Other than that, great camera!
Regarding the date and time, Actually its normal everytime you removed the battery you need to reset the date its is because the camera doesnt have a internal or built-in battery that can run the internal clock or maintain the date settings., ... Kodak EASYSHARE V1253 Digital Camera
I wish to remove the date and time from my Kodak easyshare Dx6490 camera and have misplaced my handbook
You may view/download the user guide here. The date stamp instructions are on ... Kodak EasyShare DX6490 Digital Camera
I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp
There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera
Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.
The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera
Kodak Easyshare camera - acting strange and won't turn on
I STRONGLY suggest not trying to pull out the lense with a knife. i did and now its broken ENTIRELY. \015\012\015\012kodak sucks. \015\012 ... Kodak EasyShare C330 Digital Camera
New camera - I need to set date and time. - Kodak EasyShare M530 Digital Camera
Press MENU, use left/right to select Setup, use up/down to select "Date&Time." Use left/right to move between fields, up/down to change the value. Press OK to accept. ... Kodak EasyShare M530 Digital Camera
Help I have a Kodak easyshare Z812 IS When I turn it on to take a picture it either, flashes green, turns on then off right away or the format something or other comes on. I have changed batteries several times, even erased pictures help what do I so? With 4 grandbabies and halloween right around the corner I need my camera. Please could someone help me Thank, Cheryl Please reply to [email protected]
Does the lens extend fully from the camera before it turns off or does is stay retracted? Has this been dropped or gotten wet recently? Try removing the SD memory card from the camera and powering it up to see if you still get the "format" prompt. ... Kodak EasyShare Z812 IS Digital Camera
Battery Drain I have a constant 70ma drain from thebatteries when turned off. I insert the plug into the external 5vdc to disconect the batteries from the camera and this splves the problem. I now find that the time and date have to be entered or just press OK for the camera to operate. Is there a second internal battery for the clock alone. Thank you Richard
Have a look:\015\012\015\012http://www.fujifilmusa.com/support/ServiceSupportProductContent. ... Fuji FinePix S7000 Digital Camera