Having problems with your Kodak EasyShare Z885 Digital Camera ?

I tried to do a firmware update on a Kodak z885. It came back with error 6-firmware update not successful. How do I complete the update so I can use my camera?


Answers :

Repair Help & Product Troubleshooting for Kodak EasyShare Z885 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I tried to do a firmware update on a Kodak z885. It came back with error 6-firmware update not successful. How do I complete the update so I can use my camera?


... Kodak EasyShare Z885 Digital Camera

Hi there ...I have the Kodak V803 Digital Camera..a week ago i left the camera in a -10 cold temperature in the glove box in my car..the problem is, when i try to take a shot, after the flash the screen goes dark and the camera goes to a complete freeze, nothing functions anymore ..i can't even turn it off unless i take the battery out, and put it back again..the only thing i can use in the camera and don't give any problems, is recording part, it works fine . any help would be great :(


1. Try to fully recharge the batteries, and then, use them in camera.\015\012\015\0122. Keep your camera in warm environment (not too much close to hot surface) for 2-3 hours.\015\012\015\0123. Now, check your camera performan ... Kodak V803 Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

I've just update my Fuji S2500HD firmware from 1.02 to 1.04 and the process is success and ask to turn off the camera, but when i turn it on back, the camera isn't on, just red lamp has flash several times and then the lamp goes turn off. Please someoen help me asap thanks.


Hi.Try removing the battery to reset the camera. If camera still does not restart, then something must have gone wrong with the firmware update. Probably the file has not been loaded in full.Since this is quite a delicate situ ... FUJIFILM FinePix S2500HD / S2600HD Digital Camera

Firmware Update Could my Kodak DX6490 camera a while back for taking pictures very sharp and not now. could you tell me if there is any diagnostic utility?


Hello Joan, There are no diagnostic utilities available to the consumer for the DX6490. It sounds like the drive unit for the lens has worn over time. Not a cheap repair, Sorry.Best Regards, Russell ... Kodak EasyShare DX6490 Digital Camera

Firmware Hello I own a Kodak C813 camera. I thought upgrading the firmware from Kodak's site but it was a downgrade from 1.40 to 1.30. Now I want my original firmware back but can't find it. Even not on Kodak's own site! Can you please help me because now the camera is very worthless....'Thanks for help!


Http://wwwtr.kodak.com/global/tr/service/downloads/dln_ekn034495.jhtml?pq-path=11888/11893 ... Kodak Easyshare C813 Digital Camera

Hi, I had a spare kodak c330 camera which was in perfect working condition. Since I am using a Nikon camera now, i thought of converting the kodak camera to an infra-red camera. so i opened it, and after a few unsuccesful attempts, I was finally able to open the lens assembly and take out the infra-red filter. however, when I was putting everything back in place(assembling), there was a big spark - one like short circuit - probably caused by the huge capacitor that is used for the flash circuit.


The capacitor has shorted the circuits i would not bother with it .....sorry ... Kodak EasyShare C330 Digital Camera

I have a Sanyo VPC-E760 digital camera that I bought used from a friend. Yesterday, I stupidly forgot to put the memory card back in the camera before I left for my son's first field trip. Now I have 12 pictures on the internal memory and cannot figure out how to get them onto my card-which is now back in the camera. I think I still have the old cords from my Kodak Easy Share camera that I lost, but I don't want to try them if that won't work. On my old Kodak, there was a setting where I could t


First ..choose a picture that ya know that is on the internal memory ..and see if it has options ...it usually has....there you will find option for move ..or transfer ..or so ...if it doesn't have ..you got to fins a suitable data cable ...and use t ... Sanyo VPC-E760 Digital Camera

Zoom error Today after using my camera for awhile the back screen displayed "zoom error" and a little sound whirled. Then the camera shut off by itself. I turned it on and off a couple of times, but without success. The lens is extended and will not withdraw back into the camera. I have taken out the batteries and re-inserted them. Finally, I gently pushed the lenses back to the body of the camera (as they seemed to be trying to go back to the camera), I am still getting the zoom error reading a


You may be true that sand must be creating this problem, as this happens very often. the sand enters into the lense assembly, creating friction in the movement. if this has happened total dismantelling and cleaning of the lense assembly will solve t ... Olympus Camedia C-350 Digital Camera

How can I format the SD card on the PC? I recently loaded the Ver. 1.10 firmware to correct the slow shutter problem that has plagued this Konica Minolta DiImage Xi camera. Now after successfully installing and confirming that it updated? the camera continuously wants to be updated and turned off. If I remove the firmware the camera will not boot up, I think because the SD is not formated. How can I format the SD card on the PC?


The SD card must be formatted in the camera, not the computer. ... Konica Minolta DiMAGE Xi Digital Camera

I recently loaded the Ver. 1.10 firmware to correct the slow shutter problem that has plagued this Konica Minolta DiImage Xi camera. Now after successfully installing and confirming that it ?updated? the camera continuously wants to be updated and turned off. If I remove the firmware the camera will not boot up, I think because the SD is not formated. How can I format the SD card on the PC?


... Konica Minolta DiMAGE Xi Digital Camera

I can take digital photos that are on the sd card but I am not able to get my pc to download or reconise the Canon Powershot. I can not download photos! It used to go into download mode as soon as I plugged the camera inot the pc by using the digital port on back of camera and usb port on pc. What can I do. I have reset the camera setting back to factory with no success. I have Windows xp.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S1 IS Digital Camera

My kodak M1063 digital camera was working great with no problem, my husband started useing it but the batterie was low and needed charging he didnt want to wait so he took out the batterie and put a batterie from a used kodak that we nolonger had but kept the batterie. when he put it he turned it on took a couple of picture and the pluged the usb cord to the laptop to trasfer the pictures to the computer and then the camera completely shut off and nolonger turned on we tryed pluging in to charge


The old used battery was probably not used for a long time and in time, completely discharged and died. It can't be brought back. I don't know why your camera won't turn on with the original battery. ... Kodak EASYSHARE M1063 Digital Camera

I have an Olympus Sp-570UZ and im running Windows 7 using the "olympus digital camera updater" im tring to update the Firmware but each time it starts to update it gives me "failed to connect with the camera error 0x80070005 " and on the camera screen "n B" please Help


... Digital Cameras

Have used the camera successfully for the past 9 months, up until Friday no problems. Then all of a sudden camera just shut down, while in use. I've re-charged the battery several times longest period of re-cahrge was 18 hrs. When placed in camera battery power only lasts for a minute or 2, then is dead. I cannot figure out if the camera is malfunctiong-causing the sever drain or battery is kaput, not taking a charge. Need advice before spending $$$ for a new battery or sending camera back for


Maybe you droped it in water or on the floor. have you tryed changing the battery at all? if so you should take it back to the shop they got it from and explain it to them. they should give you your money back or give you a new one!! ... Digital Cameras

Memory card my memory cards that worked in my other kodak camera isn't working in this camera. 9z1485 is) it won't let me review pictures already on card. help I received a Kodak Easyshare C713 for Christmas.    I have gone through the formatting process with a new memory card, but the camera only takes the 10 pix in the internal memory and then tells me the memory is full.    Have a 2GB card which I can't use. Shall I take the camera back to the shop?


Try to check the Memory card if it is compatible with your new camera. To know this you need to read the owners manual and try to check the directions on putting your memory card. Your memory card must be check also from a computer if it is still fu ... Digital Cameras

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Memory card I love my Gateway DC-T50 but the card fills up too quickly.I have a Kodak SD 256 MB memory card and want to get a bigger one.So I went and got a 2 GB and installed it , the camera screen said This card cannot be used. I took it back to the store and the clerk said it was probably too big because I have an older camera. So I exchanged it for a 1GB and it shows the same error message. My question is; what is the biggest memory card this camera can use? I have misplaced my manual, or I


Try a 512mb because your camera could be older then the 1 and 2gb memory cards can handle...or depending on where you are..you could take it to Best buy and they could tell you...hope it helped =) ... Gateway DC-T50 Digital Camera

My Kodak Z1012 is camera doesn't work. I sent it to Kodak because it had a 1 year warranty. They mailed it back and said everything was fine but it still didn't work. I researched and many people said that it was the battery and that I needed to use a specific kind of Ion battery. I bought a Kodak KLIC 8000 rechargable battery and it still doesn't work. My year warranty has passed and now I am stuck with this camera that doesn't work. Any suggestions? Thank you.


When you received the camera back from Kodak and you found it didn't work, you should have immediately contacted the support techs at Kodak and explained your situation. Then you would have been issued a complaint number and your camera could be retu ... Kodak EasyShare Z1012 IS Digital Camera

I bought a spare battery DMW - BCG10E for my Panasonic DMC-ZS3 Digital Camera but it doesn't work since the firmware is meant for Version 1.1. Should I try to downgrade my firmware to V. 1.1 in order to be able to use that battery? Or, is it going to affect the quality of playback HD videos? In any case, I tried to download the firmware Update 1.1 Driver for Mac OSX to be able to use that battery but couldn't find any internet server capable of doing it. Thanks!


Hi.Most batteries of this kind work with firmware 1.1 and following \015\012(1.2,1.3 and 1.4). They never work with the 1.0 version, which was \015\012built in in earlier DMC-ZS3. Check your firmware version. If you have 1.0 ... Digital Cameras

I have a Kodak Z1015IS, about 16 months old, that has not been subject to any type of liquid or damage. One day I went to use it and I was not able to adjust any of the PASM settings (i.e. f-stop, shutter speed, etc.). All other hardware and menu systems work just fine, it is just that the settings are locked in place (at the levels of my prior use). I've tried updating the firmware, formatting the internal memory, and removing the battery with no luck. Just spent time with Kodak, and a


Kodak is right, they don't release any type of technical information about there products to the user, the only ones that can get parts or tech support are the repair centers, sorry but that is just the way they do things, this is not just Kodak it i ... Kodak EasyShare Z1015 IS Digital Camera

I have a Samsung VP MX10 Camcorder. When I make a video, it plays back ok on the camera's own screen. But when I take the SD card out of the camera and put it into my PC (Vista), it only plays back the sound, with no picture. Am I using the wrong type of SD card? I have installed the Samsung software onto my PC and I have formatted the new SD card, but still without success. What is going wrong and can you help me solve this problem? Thankyou.


Have you downloaded update of driver for Vista from Samsung website?\015\012You have not mentioned model number so I just can provide you ... Samsung Digital Cameras

I have a Kodak digital 880 camera which has performed quite well.Today when I took a few pictures and saw thepicture complete on the back of the camera when I tried to print it about two inches at he top of the picture would not print.Why wouldnt the complete picture print?


HI there, please adjust the paper setting as per print size. Your wrong printing size adjustment make that fault. So i suggest you before print view the print preview. That you can see what is the final image will will come in paper. Thanks & wai ... Digital Cameras

I have casio exilim ex-z50. It worked fine the last time i used it. I went to use it yesterday and when i powered it on it asked for a date & time reset. after i reset the time it turned off and would not turn back on. After charging it it would turn on, but with no display. The display is completely black and when i take a picture and retrieve it from the camera the picture is also completely black. any suggestions. thanks


Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Casio Exilim EX-Z50 Digital Camera

I have a casio excilum ex-z100. Recently I downloaded all the photos I had taken on my 4gb SD card to my computer. I now want to transfer the same photos back to the sd card and continue using it in my camera. The problem is that while the photos are now successfully installed on my sd card again (Ican open and view the card contents on my computer) when I put the card back into the camera and try to view them there it says no files are available?


Your computer uses a different writing system than you camera does...therefore, your camera cannot recognize the files your computer wrote to the card. ... Casio Exilim EX-Z100 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5003 seconds