Having problems with your Kodak EasyShare Z915 Digital Camera ?

Ribbon cable install, screen


\015 Replace it\015

Answers :

Don't understand question, the ribbons have a tiny lock slider if that is what you are asking.
Repair Help & Product Troubleshooting for Kodak EasyShare Z915 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Ribbon cable install, screen


Don't understand question, the ribbons have a tiny lock slider if that is what you are asking. ... Kodak EasyShare Z915 Digital Camera

My cameramemery is full. I can not take any more pictures I tried to use my usb cable to download my pictures off my camera,but only the English screen comes up.When I close that screen my wizard screen will not come up. It says I need to two drivers first (PENSSTER.INF and PENSPDR.INF0 installed first


Hello bonkerj,if you are using Windows and go to "My computer" or "Computer" (if on Vista), you should be able to see your hard drive, any CD drives and so on. With your camera plugged into your computer, you should also be able to see t ... Digital Cameras

Canon ixus i7. LCD screen is cracked, and thus does not sdisplay any image, however the camera still zooms, takes pictures, etc Obviously now viewfinder so only way to see what your taking pic of is through the cracked LCD.(whic you can;t as it is pure white with black leak lines of the crack. I assume its a simple replace of the LCD screen which i would assume connects like any standard LCD screen using a ribbon cable?


I know some canon LCDs can be replaced by the user. Canon will sell you the specific part or you can find them on ebay. The LCD ribbon cable can be easily pulled out and with a little fiddling a new one can be put in. I have not personally done it wi ... Digital Cameras

Is there a way to replace lcd screen's ribbon cable latch?


... Nikon Coolpix S210 Digital Camera

DCRSR-190E screen switches off when fully open - only works when partially open. Could this be a ribbon cable / flexi PCB cable issue -0 is this a common fault ? Neil


Its flexible wire / ribbon problem and lcd screen will work fine after replacing this part. ... Digital Cameras

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o


Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

I've just bought a vistaquest FS-501 Scanner. I don't have an sd card for it. I've plugged it into my xp pc (using the usb cable supplied) after installing the driver. Now the led light comes on when I open the cover but when I insert some film into the scanner no image is displayed on the screen. Does it have to have an sd card in it to make it work?the screen does work when it's first turned on but then goes off and it does matter which buttons I press it won't display the images???


Tweak the USB cable at the back socket of the box...there's a certain point where the cable will actually work and then you will have an image on the screen...sort of not quite completely fully in to the socket.you're meant to be able to ... Digital Cameras

Jazz dv179 camera flip screen connector needs a new ribbon cable. where can I find the part number or get a new part


... Jazz DV-179 Digital Camera

Camera FZ30, My ribbon cable to my LCD screen is broken. Where can I get a replacement ? Dont want to go to Panasonic as there prices are a rip-off...... Look forward to some positive feeback , Thanks


Try this site, no guarantees but they are apparently the right parts...http://g-plushk.com/index.php?cPath=53 ... Panasonic Lumix DMC-FZ30 Digital Camera

I have a Canon zr950 mini DV cam corder and when I connect the DV cable I do not see the picture on the preview screen on the PC. Drivers installed and it recognizes the cam.


I just discovered that this is the same reason I could not transfer the video for my cannon ZR950 the menu options on the cam has a setting to turn tv on and off ... Canon Digital Cameras

Panasonic DMC - F3. Attempting to load photos from camera to PC. Software provided has been installed. Camera has been connected to the PC via provided USB cable. PC does not seem to recognise camera. Camera is saying " connecting to PC " NO copy to PC screen appears. Copy to PC function within PhotoFunStudio5.0 does not work.No source drive can be selected. Next button is greyed out and selection box is empty. PC seems to not recognise camera


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Panasonic Lumix DMC F3 Digital Camera

How do I get the ribbon cable plugged in for a Nikon Coolpix S3000 replacement screen


The ribbon cable(called LVDS connector) is very easy to plug in. There is flap kind of thing that clamps down on the connector all you have to do is, rise it upwards(you will find it if you look close) and line the pins of the connector with the pins ... Nikon Coolpix S3000 Digital Camera

I can't download photos to computer via USB cable. The software is installed, but when I click the OK button on the camera, the camera screen goes black and nothing is shown on the computer to be downloaded.


Go to my computer and double click on the camera icon to open it. ... Polaroid i1035 Digital Camera

Hi, I have a DCR-SR72 Sony Handycam. Screen doesn't work - internet is indicating I need to replace with cable FP-610 (187145711).? In getting to this stage, I have broken the switch? to inverter the image. I think this is FP-621. Please can you advise on repair time and cost and where I could get hold of these ribbons in the UK?


... Digital Cameras

Black screen When i bought a usb cable for my pentax s5i.. and connected it to the computer the screen suddely turned black, i thought that happened coz the computer is reading it but the computer wotn recognize it at all and even when the camera is not connected to the cable.. the screen is still black.. i tried taking the battery out and squeezing the camera but it still wont work.. it still takes pictures htough and the pictures are fine. Thanks for your help :)


... Pentax Optio S5i Digital Camera

I plug my Flip HD camcorder into my computer and nothing pops up on the screen so that I can install the software. I can't figure out how to install it because the instruction video says it will automatically show. I know it's plugged in because I can see on the flip screen that it's recharging but nothing appears on the computer screen


... Pure Digital Flip Mino Digital Camera

Problem inserting ribbon cable into socket on Z915


... Kodak EasyShare Z915 Digital Camera

FZ-30 LCD flat ribbon cable broken


Hi,Part No is VYQ3473. You can order it directly from Panasonic. It will cost you 29 USD without taxes.Jimi ... Panasonic Lumix DMC-FZ30 Digital Camera

Whenever I plug the USB cable into my camera, the screen goes black. It does it even when the cable isn't plugged into the computer. Even though the screen is black the camera still functions normally but it won't let me upload anything. When i try to upload my pictures it keeps saying USB Mode connecting........ then it says below that: Switch on [ MENU ] .... i don't know what to do ????


As far as I know, most cameras are made so that once it senses a USB cable (whether as being inserted physically or as a source of current), it reduces the camera to pretty much no more than a memory card reader.  It is my belief this is so you ... Sony Cyber-shot DSC-S650 Digital Camera

How do i download onto my lap top? i plug in the usb cable and the screen on my camera goes blank.. wat do i do.. i unplug the cable and the screen comes back on..??


Use a cardreader to download your pictures. ... Nikon Coolpix S210 Digital Camera

How to install focus screen bought camera at flea market did not have focusing screen bought part want to install


The following link is very helpful. You can try it.\015\012\015\012http://www.ehow.com/how_2285528_replace-slr-cameras-focusing-s ... Canon EOS Rebel K2 with 28-90 lens 35mm Film Camera

I've had my Kodak Z612 for about 2 years with no problems. The last couple of times that I hooked the USB cable to the computer to transfer pics, I turn the camera to on as I would normally do, a blue screen flicks quickly with a message I can't read and the screen goes off, (doesn't stay on and give you the percentage of sync completed message). Computer doesn't seem to be finding the camera. No problems with taking pictures. Could it be my USB cable is bad? I've charged batteries but never bou


We downloaded the updated software from kodak, rebooted the computer and it worked great. Thanks for the help. ... Kodak EasyShare Z612 Digital Camera

Just tried to hook up my camera to my computer and the computer is not recognizing the camera for some reason. Is it possible that the USB cable is bad. I am not getting an error message and we have done this many times without the software installed. We installed the software that comes with it and it wn't allow us to do it either. We just downloaded norton antivirus 2009 to our computer and this is the first time we have tried since doing that. I think the USB cable is bad but it's pretty new.


I think the USB cable is bad or ur USB port might be loode.. ... Canon PowerShot S5 IS Digital Camera

When I connect the USB cable to the camera to transfer pictures the screen goes black. When I remove the cable the screen is normal


Hi,It is normal, when camera plugged with computer via usb cable, it sets transfer mode and its lcd will turn off, you need to run supporting software that was supplied with camera to transfer pictures in computer or click My Computer and check ... Nikon COOLPIX L4 Digital Camera

I already installed the islim 300x genius web cam driver following the setup on screen step by step installation. It was successfully installed in the system but the camera only lights but windows again asks for the driver when it was already installed prior to attaching the webcam on usb port.


... Genius Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1565 seconds