Having problems with your Konica Minolta DiMAGE 7 Digital Camera ?

"No Card" warning appears on the monitor when the IBM Microdrive is loaded.



Answers :

Please wait for a moment until the warning message disappears and the Access lamp extinguishes. The normal operation will resume soon. The start-up time of the IBM Microdrive, until it becomes readable by DiMAGE 7, takes longer than Compact Flash. In the meantime the camera may not detect card existence.
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE 7 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

"No Card" warning appears on the monitor when the IBM Microdrive is loaded.


Please wait for a moment until the warning message disappears and the Access lamp extinguishes. The normal operation will resume soon. The start-up time of the IBM Microdrive, until it becomes readable by DiMAGE 7, takes longer than Compact Flash. In ... Konica Minolta DiMAGE 7 Digital Camera

When a CompactFlash is loaded, a message of "Card Error. OK" appears and remains on the LCD monitor.


Please follow the procedure below:\015\012\015\0121. While the message is displayed, press the center of the controller.\015\0122. The LCD monitor and data panel will turn off .\015\0123. Turn the Main Switch to OFF and remove the CompactFlash card f ... Konica Minolta DiMAGE A1 Digital Camera

Unidentified images When I view images after taking photos, a large number appear as unidentified images or thumbnails and when downloaded appear as ?s and fail to load. Help!!! While loading my pictures from the camera card on to my computer, the pictures came through, but the short movie became a "Unidentified Image". I desperately want to get the movie back. I don't know how my camera card could have become corrupted in the process. Please help me recover the movie.My product os a SD750 Powe


Lost movies can be recovered if your data are not covered, and it's not a hard thing now . And this guide will help you:http://www.gosha ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Transfer pictures I loaded software. I lost USB. How do I transfer pictures from memory card to computer? I know i can put the memory card in my printer. The pix appear to be loaded or transfered, but I can't see them enough so I can drag and drop them to another folder. What do I clik to get this to work? Help Please, Thanks, Phyllis


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Nikon COOLPIX L18 Digital Camera

HELLO CAN YOU HELP MY VIDOES ARE SAVED IN THE INTERNAL MEMORY! I HAVE TRIED FOR DAYS TO DOWN LOAD THEM! IT WOULD APPEAR I DIDN'T FORMAT THE CARD BEFORE FILMING! IT ALSO APPEARS IF I FORMAT THE CARD NOW I WILL LOSE THIS DATA! CAN YOU HELP! LEAVING ON A CRUISE TOMMORROW AT 12:00 NOON THANKS JOYCE


Hi,\015\012\015\012To save your video, please connect the camera to the computer.\015\012\015\012It will appear as a drive in the My computer window.\015\012\015\012Then please browse through the folders to the int ... Sanyo Digital Cameras

Level Warning Whenever I turn on my camera (Digital Rebel 300D), my LCD monitor flashes this: "C bc". The manual tells me this means "Level Warning". What level is it referring to and how do I fix so that this no longer appears.  Now, when this message appears, I simply tap the "shoot" button and it goes away until next time I turn on my camera...


Battery level. charge it or replace it if it does not come up to full power state. the camera has a batter meter. refer to the manual and see if the battery is low. it requires you to push a few buttons while looking at the data window.not real ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

I have a canon eos rebel xsi 450D. i loaded the eos digital solutions disk on to my windows xp computer. it seemed to load fine. the memory card manager screen appeared on my computer.then a small EOS utility screen appeared and read " camera is not recognized" and would like me to click ok. please advise. my phone number is 617-795-2558. e-mail: [email protected]


Not a good idea to post your phone # and e-address on this or any other site.This question arrived on FixYa.Problem is the camera firmware isn't compatible with the software possible needs a Canon free update or purchase a car ... Canon EOS 450D EOS Rebel XSi Digital Camera with 1785mm and 70300mm lenses

Pix still appear on my nikon d70s but they won't load to my hp or mac. i took the card to the machine at a retail store and it wouldn''t read the card. i took it to a camera shop and they ran a retreival on the card and it only retreived some of the pix. is there a way to get the rest of them? they said the next stip was very costly and still may not work. any ideas?


I suggtes visit this link and check this article about Recovering accidentally deleted ... Digital Cameras

Memory Problem 1. With the memory card not installed, I get the following on the display "Warning!!This card cannot be read." 2. It also fails to write a picture to the card when it is installed. 3. The menus do not highlight when selected, they appear corrupted.


Get a card reader. Your card will be shown as a drive. Right-click and format. Then put it back into the camera and see if it works. You should get a card reader for about 8$ ... Nikon Coolpix S1 Digital Camera

What is protected card . my cam is not able to take and on lcd monitor protected card is appearing


The card may be protected and you will have to go into the menu to find the control to turn the protection off. Or, it might be something simple like the slide switch on the side of the card is in the locked position. ... Fuji FinePix J10 Digital Camera

Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the


... Sony Alpha DSLR-A200 Digital Camera

My Minolta x31 camera has a fault. Cannot record a photo (black screen) can playback photos stored on SD card. Flash & monitor work as per normal.When in photo mode monitor is nearly black all over.Flash fires & appears to record photo. Nothing recorded.Please help


Sounds like the image sensor may be gone. You should check with Minolta for service or the vendor where purchased. ... Digital Cameras

Card errro We are using our Olympus digital camera mju 410 when a message appeared in the monitor. The message is CARD ERROR. What is the cause of this error and what is the solution?


Sometimes the card can get a little bit of dirt on it which has caused this error message to appear on my camera.  Just take the card out and carefully wipe the metal contacts at the bottom with mentholated sprits o ... Olympus MJU 400 Digital Camera

When 4 gig. sd hc memory card is loaded into camera CARD IS IN ERROR msg. appears on lcd screen. Any ideas???


The A10 uses SD cards. Your 4GB card is actually an SDHC card. While SDHC cards will fit into the slot, they are electronically incompatible and will not work with the A10. You need to use SD cards, 2GB and smaller. ... Pentax Optio A10 Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

My D70 was working normally when I last used it. I left it safely stored at my vacation home for three months, and when I tried to use it today it appeared to take pictures, all functions seemed to be working, but reviewing the pictures I see only a black monitor. It shows a file number, the info shows exposure details but there is no image. I did a re-set to factory spec, put in a fresh battery, tried several memory cards, all with no success. Looking at the memory card on my computer shows the


The shutter in the camera lens is not working, the motor that controls the aperture has failed or the related gears. This device will require a camera specialist to resolve the issue and an estimate recommended. ... Nikon D70s Digital Camera

When i down load pictures, on my nikon coolplix l100 some of the pictures=== half of the picture is a different color. It's like if it were a printed picture it did'nt use all the colors. kinda like the printer ran out of ink. the picture is looks O K on the camera monitor. but not on the computer monitor. could this be a bad sd card


... Nikon COOLPIX L100 Digital Camera

Was loading pictures from SD card and frame appeared to lock up. It went blank and will not respond even after turning on and off and unplugging for a long period of time. Tried a different card -- nothing -- no response. Called technical support for Smartparts and she had me connect it to my computer -- computer did not recognize any new hardware. Warranty is only 90 days and I've had it six months. Smartparts tech support says there is no repair available. HELP!! Thank you. Barbara


Please try it in another computer.. if it works it detects on another computer then the problem is with ur computers USB . that can be rectified. \015\012\015\012even try these steps which may work for u.\015\012 ... Digital Cameras

My new Canon G11, purchased in August,2010: 1) The camera cord (to load photos from camera to computer) is no longer interfacing, but the card works (I don't think it is the software as it malunctions on both office PC and home Macpro). Also noticed that sometimes when trying the cord, when I turn camere on, the lens comes out, which never happend when transferring photos via cord 2) I noticed shortly thereafter that the camer no longer "beeps" when the green in-focus boxes appear on hte view


It sounds to me like one or more of the wires in the cord has broken, or there is a problem with the USB port on the computer. Try swapping to the other ports to see if the problem goes away before going forward.If the problem is present ... Canon PowerShot G11 Digital Camera

I have a Caplio R4 camera which has recently become out of focus. The zoom appears to still be working fine and the shutter closes properly but the LCD is all blury. The only thing I remember doing to loading a new SDHC card and trying to format it. Please help


Please try and remove off the SD card and try a scan on the PC . Remove the battery for sometime and load another card and switch over the camera. If the fault appears then check the pictures shot on the camera on the PC, if the pictures are blurred ... Digital Cameras

AF5078PS FHOTO FRAME- HAVE COPIED 5 FILES FROM MEMORY CARD BUT ANY MORE & AN IMAGE APPEARS WHEN I PRESS COPY THAT SAYS 100% FULL WITH WHAT LOOKS LIKE A CLOCK IN A WARNING TRIANGLE SO IT WON;T COPY ANY FURTHER FILES


... Agfa Digital Cameras

Can't download pictures from my Canon Ixus 80 IS camera via USB cable. It appears to connect but there is no software options in the window and only option is to cancel. I aslo notice that the little green light flashes on the camera and then the screen goes off. The other downloaded canon software also fails to recognise there is a camera attached. I can down load my pictures via the card reader.This was working up until the end of March but my software crashed with the camera still attached an


... Canon IXUS 80 IS Digital Camera

When I touch the cover where the CF memory card is located then an "access" warning appears on the viewfinder following with the text "REC folder is 101MSDCF".


Yep - same problem as mine. It is the CF Door switch that is at fault. Door on my F828 is a little loose now ... Sony Cyber-Shot DSC-F828 Digital Camera

Internal Memory I have a couple pics on the internal memory of the camera, Ide like to put on my memory card. Is this possible? I know I could load it to the comp with a usb cord, the problem is I think my hubbs accidently threw out the box not knowing the cord was still in it. I have memory cards and a memory card reader I use to load pics to my comp. But I cannot figure out how to load the internal memory, to my memory card so that it can be loaded to the comp. Thanks for the help!


It is possible. Go in where you can see your pictures and then press menu. Go down to copy and press right arrow. Highlight internal to memory card and press set. Should copy them onto your memory card for ya. :) ... Casio EXILIM ZOOM EX-Z60 Digital Camera

My Kodak Easyshare Camera saves pictures onto an SD card but when i try to load the SD card onto the computer i get an error saying the card needs formatted


... Kodak EasyShare Z612 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2012 seconds