Having problems with your Konica Minolta DiMAGE 7Hi Digital Camera ?

How do I format the card when it says card error on screen? I can not get the screen to change with the menu button


Answers :

Hello

OK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock.

6c99e31.jpg

If\012 the error is still displayed after you did the above, you might want to\012 try the card in another camera.

If\012 the card works in another camera . the problem is with your card reader\012 in your camera.

If you open you sd slot and look inside with a \012sharp light , you should be able to see on the left side of the slot \012there is a little copper or spring steel lever switch. This switch work \012as follows:

1. When no card is inserted / no write protection ,\012 the switch is open and thus the protection is off.
2. When locked\012 card is inserted , the tab is depressed and tells the camera that the \012card is lock.

Contrary to popular belief ,the little tab on the \012sd card is not an electronic switch and does not physically influence \012the card operation itself. If you put a locked card into a camera \012without a sd lock switch , you would still be able to use the card \012normally.

It is incredible difficult to fix this switch because \012of space limitations in the sd card. Look into the sd slot and if you \012can see the switch , use a needle to pull the little tab down toward the\012 base of the camera by about 2mm or until it works being careful not to \012bend it.

If this does not resolve your problem , there might be a\012 short in the switch circuit and the camera will need to be disassembled\012 to resolve this error. This should cost no more than $50.

Please\012 feel free to contact me if you need further information

Kind \012regards
Andrea
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE 7Hi Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I format the card when it says card error on screen? I can not get the screen to change with the menu button


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Konica Minolta DiMAGE 7Hi Digital Camera

Neither the fujifilm 256MB xd card nor th enew Olympus 2GB xd card will work in the A340. I've put the card in and went to Format it in the camera as per teh menu. It acts like it does but when you take a picture it says "write error" When you turn it on again it still says "card not initialized." I've tried formating them with the camera on (lens cover open) and using the menu and with the camera off (lens cover closed powered on using the button on the back) and using the menu from that screen


The camera needs to be up-dated to read the cards it may still have the old dater in it! so it cant "see" the biger cards ... Fuji FinePix A340 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I have a Kodak EasyShare CX6330 and I bought a new 4GB SD card today. WHen I put it in and turn on the camera it says "memory card requires formatting" I press Continue and it tells me everything will be deleted...I press Continue and then it says it's formatting only it takes me right back to the initial "memory card requires formatting" screen. It just goes in a circle and it won't let me go to the menu when I hit MENU. How do I get it formatted?


Kodak CX6330 camera support KODAK SD Cards up to 2 GB and KODAK SDHC Cards up to 8 GB.Other manufacturer cards should be up to 2GB because of camera hardware read/write speed.So if new 4GB card is other then above mentioned Kodak cards, t ... Kodak EasyShare C330 Digital Camera

I have just bought a new memory card for my Olympus D 390 camera, when i put the card in the camera it goes to a screen saying card set up, then gives the options of power off or Foemat. When i choose format it askes , format yes or no, if i choose yes it then says card error, if i choose the no option it goes back to the maun set up screen again.the memory card that i am trying to put in is a 1 gig memory card, is that to big or do i have to get an upgrade from somewhere to allow the camera to


You need at least a 4 gb for it to read.. i just did mine too.. they are on sale right now at Target for $ 14.99, try this and let me know if this helped you good luk. tiffany in chattanooga tennessee ... Olympus Camedia D-390 Digital Camera

Polaroid Model a815 just bought yesterday: I took pictures with it and turned it off to get another item to photograph. When I turned it back on I got "Card Error" then a screen to Format Card: Cancel/Execute. I could not move to hit the cancel. It would only take Execute. It sat there "Busy" until it timed out. When I turned it back on I was back to the Card Error. I removed the Card and tried a different one. None of the buttons would work, but I still had the Format Screen showing. According


As you only bought it yesterday, take it back to the vendor and request a demonstration to your satisfaction. This looks like a fault, assuming so, request a replacement under warranty.\015\012\015\012Normally, all of these camera's are s ... Polaroid Digital Cameras

My mother bought me a polaroid a815 today. when i turned it on, then screen said place SD card. When i did that a card error sign showed up. Then, another screen saying format cancel or execute. It wouldnt let me go to cancel so i had to hit execute. Another screen saying busy,,,please wait shows up. None of the buttons work whenever this screen appears. HELP!


... Polaroid Digital Cameras

When I turn the camera on I get the message "memory card error". The only button on the camera which then works is the menu button but it just brings up the screen and then the same error message. Yes, I have replaced the memory card and the first memory card works in our other camera so it is not a problem with the card. My computer also fails to recognise the camera when I connect it via the usb port. Any bright ideas?


You need to format the card in the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. This will erase and initialize the card . To download pictures, the most trouble-free way is to use a card reader and download t ... Pentax Optio S4i Digital Camera

When a memory card is put in the camera a red screen comes up stating "CARD HAS WRONG FORMAT. Press ok to format card." When I press Menu/OK the window says, "Unable to format." I can't even get to the menu in the manual to format the memory card.


Hello Mr rtautwein .\015\012\015\012Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com\015\012\01 ... HP Photosmart M425 Digital Camera

I just bought a SanDisk Ultra SDHC memory card - 4 GB for my Canon 610 Camera. Previous to this I had a 1 GB card in the camera and it worked fine. Now with the 4 GB card I get a message which says "memory card error" and "Card locked!". When I go to the screen tools screen on the camera, the word format is blanked out and cannot be selected. -- Is this the wrong card for the camera?


Hi,Canon A610 firmware support maximum 2GB memory card and above that limit, memory card error message will appear.Please use up to 2GB memory card in your camera.Hope this info will help you.Thanks. ... Canon PowerShot A610 Digital Camera

Polaroid i533 My Polaroid i533 doesn't seem to recognize the memory cards. It won't format and reads card error? I changed the card in my camera, (512MB, SanDisk), and now it reads "card error". How do I get rid of the notice on the screen? I had no problems with the previous card.


Check you camera instruction book. The card may be the wrong one or two large or??? ... Polaroid I533P Digital Camera

Camera: Olympus C-720 Ultra Zoom Problem: All of a sudden the camera will not recognize nor format the memory card. I have tried changing the card, and the batteries...thinking the power was low, but with no success. On the LCD screen I get an 'Card Error'...with 2 different codes: 132F & 1304. I have tried to get information about these codes but there also I have not been able to acquire any results. Could someone please help me to fix this/these problems so I can begin to use the camer


This problem has been happening to owners like you since the camera first came out. Go to the Olympus website and e-mail them with your problem. By now, they have a solution to the problem. ... Olympus Camedia C-720 Ultra Zoom Digital Camera

Olympus FE-210 When turned on with the XD-M type card. the camera comes up with the card set up menu and asks if you want to power off or format the car. if i select format, it asks Y or N if Y then i get a Card Error and a blue screen


Hi!!!!i have the same type of problemmay be your memory card has been corruptedtry to used memory card reader!!!insert the itthen try to format in the computeror replace the memory cardtry t ... Olympus FE-210 Digital Camera

I have a brand new PNY Optima SD card I wish to use with my easy share camera. When I insert the card into the camera it says the memory card requires formatting, then continues to say formatting will delete everything on the memory card. It repeats and WILL NOT FORMAT. I cannot even get to the MENU to format the card. I am not concerned about getting pictures OFF the card - the issue is that I cannot format the card to use in the camera. Yet my Kodak manual says I can. Why won't the camera form


Hi Mr\015\012\015\012Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com\015\012\015\0122\015\012O ... Kodak EasyShare C875 Digital Camera

Help!!! Hi I have a Dimage 7 HI and It only lets me take one picture at a time before deleting. My card is empty and when there is one picture on the card you get ready to take a shot and it sounds like it is going to take it and you can press the button all the way but it never takes it. on the screen it says that the frames are moving but it doesn't take the photo if there is already on taken. ai need help to figure out why that is . is there a button that got pushed to change the amoun


1. Format CF to FAT16 - no remember how many folders u may have at once2. Set "DRIVE" to single frame3. Set quality to FINE - RAW may take up to 10MB and u can`t take series nor UHV movie ... Konica Minolta DiMAGE 7Hi Digital Camera

Can't get to set up menu with my new memory card in camera to set it up to use the memory card instead of the internal memory. Camera keeps saying memory card needs formatted-continue or cancel-I go to continue-it says formatting then goes back to saying memory card needs formatted-continue or cancel and around and around...camera will go to set up menu without memory card in.


1. with no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory.\0122. insert the card and do the "format" thing again from the menu as you just did for the internal memory. ... Kodak EasyShare C743 Digital Camera

I can't get a new memory card to format it says on the screen that the card is blocked can you help


SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. ... Casio Exilim Zoom EX-Z80 Digital Camera

I have a nikon d70 digital camera with which I have shot a few thousand exposures. A number of what seem to be minor software errors have been cropping up. For instance: I can't get the camera to "beep"; I can't format the memory cards using the 2 button system - I have to go through the menu setup; I can't select certain of the image quality options using the "quality" button - I have to go thru the manu. Certain numbers come up unreadable on the control panel. The above problems do not stop


Hi,\015\012 Sounds like you have a hardware issue and not so much a software problem...\015\012Try: removing battery and lens leave off for a few days.\015\012put in a newly charged battery and different lens...\015\012turn on ... Nikon Digital Cameras

I purchased polaroid i1035 10 megapixel cemera,when i am taking a picture its show error message "card protected" on my LCD screen. i saw some of the solutions from internet to change the position of memory card to unlock on the left side of the memory card but its not working. i changed both up and down of memory card to unlock but its not working i formatted me memory card on the PC also but i am not able to format from my cemera,its showing same error has "card protected" please give me so


... Polaroid i1035 Digital Camera

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"


Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

Card Error None of my 3 memory cards are being accepted by my camera all of a sudden. I get a Card Full message, but when I try to view the images, the screen reads No Images. I've tried to format the cards again, but get a Card Error message. I've updated my firmware. The manual doesn't offer any suggestions for this error that I seem able to repair on my own. Any ideas?


If you are using a card reader for transfer to the computer, it is possible that you are corrupting your memory cards by accident (you have to make sure to eject the cards before removing them from the card reader). Try a new card and see if it will ... Olympus EVOLT E-500 Digital Camera

Card problem My S3500 says card error when I turn the camera on. Tried formatting the card and it says card not initalized. Tried new card same deal. Any ideas. I have the same problem with my s3500, 'card not initilised' I have a 512MB card in, this is the third one and the biggest I have put in but I keep getting the same error message.


I actually did format the card and this seems to have fixed the problem, so far. ... Digital Cameras

Olympus DE-510 Zoom When I turn camera on, the screen has a red T at the top, with a box saying Yes, and one saying No. The line at the bottom says Go>OK. If I click OK, I get the same screen again. If I click Yes, I get a Card Error message. I cannot take a photo. I am on a cross country trip, and don't have my manual, but I sure would like to be able to take pictures of the Rockies! I know the camera is old, but I love it. Please help me to get it working again. Thanks, Toni Sinclair


I tried to find more information on the zoom error, and couldn't find much, but I did find a free manual, which might help:\015\012 ... Olympus Camedia D-510 Zoom Digital Camera

I carent get a memory card to work at all. Tried a 2gb and it comes up with ERROR and askes if i wanna format the card, so I formated the card, and it went to picture display screen, took a photo and it came up with ERROR again. I then tried a 4gb card and when I turned on the camera and it just displays vivitar logo permanently. Camera works fine with no memory card in. Vivitar 3750 model thanks for all your help.


These cards is too much for the cam can hold and would cause errors just like u said try 512mb memory card or even less should work good and then clean it up by downloading all on ur pc and re use it i use 128mb even for mine lol,hope that helped ty ... Vivitar ViviCam 3750 Digital Camera

How do i initialize fuji s5200 xd picture card, I found the information about formating the card on pg 96 of the manual but it does not tell me how to get to the format option. xD M1GB card when put in Fuji FinePixS5200 says "Card not initialized". When I press "MENU" I get self-timer mode. Help!!! P l e a s e. [email protected]


... Fuji FinePix S5200 / S5600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4443 seconds