Having problems with your Konica Minolta DiMAGE A200 Digital Camera ?

The shutter speed cannot be set to 1/3200 second both in M and S mode. How can I set it to 1/3200 second?



Answers :

The speed, 1/3200 sec. is the highest when the aperture is used. As a condition, it is controlled only when the aperture is F8 or over in P/A mode. The highest speed in S and M mode is 1/1600 sec.
Repair Help & Product Troubleshooting for Konica Minolta DiMAGE A200 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The shutter speed cannot be set to 1/3200 second both in M and S mode. How can I set it to 1/3200 second?


The speed, 1/3200 sec. is the highest when the aperture is used. As a condition, it is controlled only when the aperture is F8 or over in P/A mode. The highest speed in S and M mode is 1/1600 sec. ... Konica Minolta DiMAGE A200 Digital Camera

In manual mode cannot set shutter speed to


The "--" is the equivalent of the bulb setting with the remote control. The first press of the button opens the shutter and starts the exposure. Another press of the button closes the shutter and ends the exposure. This is so you don't have to hold t ... Nikon D80 Digital Camera with 18-135mm Lens

Shutter speed on the auto mode of my s1000 camera seems slow. how can it be increased in the auto mode? This is a Fuji camera and by the time I press the shutter button subjects have moved. I have set the camera back to the original factory settings and I can adjust the shutter speed in the manual position but in auto it seems really slow.


You need to press the shutter button half-way and allow the camera to lock in the focus before you press the rest of the way. This eliminates "shutter lag". ... Fuji FinePix S1000FD Digital Camera

My d90 flashes an err sign somtimes when i shoot at manual mode.. but when i change my apperture and shutter speed setting, it will not appear anymore. Even at auto mode sometimes it flashes an err. Does the d90 flashes an error when you made wrong setting in your apperture and shutter speed?


On page 256 of the D-90 user manual it says that an ERR message indicates a camera malfunction and that the malfunction can be cleared by releasing the shutter. I found that the only way I could release the shutter is to turn the camera off and back ... Nikon D90 Digital Camera with 18-105mm lens

External Flash I set my Epson 3100z camera to manual mode and set up the camera for external flash. I manually set the shutter speed to 1/60 sec and the aperture to F4. I also set my SunPak flash to F4. My exposures seem pretty good. However when I review the various photo info's, the aperture reading is F5 or F4.8 not the F4 I set. Why is this? Anyone experienced this? The shutter speed are also not always what I set on the camera.


Be carefore that the stopping-down of aperture due to zooming to tele-photo. Flash compensation may be needed. \015\012 ... Epson PhotoPC 3100Z Digital Camera

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.


I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

Cannot adjust aperture or shutter speed in manual modes


Suggestion.... try to reset all settings to default. See what happens then. ... Canon Digital Cameras

On my Finepix S9500 when I select programmed aperture or shutter priority when I go to select the speed or aperture I am unable to change the aperture or shutter speed, or in fact the ISO setting. The camera seems to work well in automatic mode but I am unable to do any creative work because I can't overide the autp mode. Help!!


Sorry, not a solution but wondfered if you ever solved this because I cannot work it out! ... Digital Cameras

I was at a basketball game last night and taking pictures with the d80 and the 55-200 lens. All of the pictures I took in auto focus were blurry. I changed it to the S mode with shutter speed at 4000 and those pictures came out completely dark with nothing in the picture. I changed the setting to the sports mode and the shutter speed is not fast enough because I have the same issue with blurring or out of focus.


Hi and welcome to FixYa.\015\012\015\012I could go into a long disertation about your camera settings and what you should use, but I should let Ken explain it. I read this a couple of months ago (because I love photography too)! He has so ... Nikon D80 Digital Camera with 18-135mm Lens

Cannon EOS500D, taking a picture in creative modes I have to press the shutter button twice to take a picture.(not counting the half pressing of the shutter button. the second pressing of the shutter button can be any length of time to take a picture. It seems to think there is delay set but there is not. In basic modes the picture is taken normally


Hi kevinmullen8 - was this ever resolved? My mum was mucking around with my camera (eos1000d) and I have the exact same problem (press shutter twice in creative mode). Factory reset was of no assistance.Please help!!! ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Shutter problem When i use the manual mode on my D50, the shutter speed won't go above 30 without the camera going to 'Bulb' - the open shutter mode, no mattter what i try. Can't figure out if the settings are responsible and there really is'nt anything in th manual. Hope it isn't broke.


30 seconds is the maximum setting for the D50. Anything greater than this you can easily time with a watch using the 'bulb' setting. \015\012Most SLR's are like this. ... Nikon D50 Digital Camera

Hi! I have a problem with my samsung digimax s500. My camera makes worse photos in the MANUAL Mode. They are all dark. It seems that the Exposure compensation is set at -2. The camera shows me that when i press the Shutter button lightly. But i can not reset this in the MANUAL Mode. Wich means that i get only a normal bright photo when my exposure time is set at 8 seconds. Please help me! sincerly Georg Heidfogel


... Samsung Digimax S500 Digital Camera

Hi, I have a two year old Canon PowerShot SX1. Recently began to think my shutter speeds have been on the low side, based on ISO, aperture, and general lighting conditions outside. Went out and purchased a Canon PowerShot SX130 just to compare. Took about 25 shots with each, same subjects each time, same settings, same position, about 15 seconds apart. Discovered that, on average, the SX130's shutter speeds were over 3 times higher than the SX1 for proper exposures. For instance, at ISO 100


You may be right, from the details and data you've provided. Unfortunately, you would probably have to pay a service charge to prove it, and they would most likely replace the main board, and charge accordingly. I, myself, would just adjust to t ... Canon PowerShot SX1 IS Digital Camera

Shutter speed I cannot remember the aperture, but when I try to take a picture of the moon with my FZ20, even @ 2.8 aperture, I certainly do not have 1/100s shutter speed, but more like 1/10 or even less (P mode). I wonder if there is a problem with my camera ? How can I check that it is correct ? Can someone with experience of moon shot give me some "standard" shutter/aperture so I can compare ?


Rule of thumb I read was f11 and then 1/ISO for shutter speed. This means that if you're using ISO 100, you use 1/100. ISO 80, then 1/80. White balance set to SUN (because moon is reflecting sunlight).\015\012\015\012Wait! My camera doesn't do f11!!! ... Panasonic Lumix DMC-FZ20 Digital Camera

D90 flash I just bought a new Nikon D90 and I was on a shoot and the built in flash popped up (in bright sun in manual mode) and I cannot get it to stay down. the camera will work but only to 200 shutter speed. if I hold the flash down then it will work at all shutter speeds. Any Ideas on how to get the flash to go down?


I have just fixed this problem on my D90. Go to http://dieselpic.wordpress.com/2010/07/14/d90-flash-wont-stay-down-how-to-fix/ to see how I did it. ... Nikon D90 Digital Camera with 18-105mm lens

Pictures a very overexposed. Inside I can shoot without a flash at 400 ISO and they come out right. Outside they turn white. Also the shutter speed won't register. I can set it at 125 or even 500 and it comes out at about 1/30 or 1/60 of a second. Lower shutter speeds are actually lower. This happened a day after I cleaned my sensor. Could that be the problems?


Have you set the 400 ISO, or do you have the camera on Auto ISO?\012\012\012Go back to your setup menus and set the Sensitivity to the lowest ISO value possible.  Now set the White Balance to Auto. Exit the menus.Now set the camera t ... Pentax *ist D Digital Camera

Can't adjust shutter speed in Tv shutter-priority mode


Download a recent firmware,dude. :-) ... Canon Rebel XT / EOS 350D Digital Camera

Apperture and shutter speed settings


First select AV (Aperture Mode) to select the required aperture then switch to M (Manual Mode) and spin the wheel until you get the right speed. \015\012\015\012Spurs34 ... Canon Digital Cameras

I have a sony HVR-Z5U and shoot mostly in HDV. I shoot mostly wedding and events ect. and have a technical question on some settings for low light situations. My cam shoots crystal clear HDV in daylight, but indoors with low light the video when viewed on a HD tv is a bit grainy and cannot figure out if this is a simple setting or if it is even correctable. My general settings are 1.Manual mode 2.Gain set to 3db-12db. 3.My shutter is at 60. I adjust my iris to correct for low light but wonder if


... Digital Cameras

I have a Nikon D50. When i go to class to learn about my settings they tell me to set my shutter speed. However i can't find where that setting is to set it for say one second. Do i only have presets? like on my dial?


Turn the mode dial to S or M. Then you can turn the command dial to select the shutter speed. ... Nikon Digital Cameras

Hi i am using a Nikon N75 to take pictures for my photo class, and the instructor wants us to take low light indoor phtotos at a shutter speed of 1/30 at f2.2. However, when i go to set these settings in manual mode the camera will not let me set my aperture to 2.2 it usually stops at 4 and there is no way i can make it 2.2. i didn't know if there is a limitation on the camera but it seems like i should be able to select what i want.


It's probably a limitation of your lens. You didn't say what lens you're using, but one of the common kit lenses sold with the N75 only goes to f/3.3 at best. If you had a lens that opens up more, the camera will let you use it.The differ ... Nikon Digital Cameras

My camera is brand new, got it just last week. I tried using the S mode on the mode dial and tried shooting with the fastest shutter speed, but all pictures turned out to be blank/black. The same happened for the P, A and M mode. May I know if it's a problem with my settings or the camera?


Photographing is matching the shutter speed and aperture to the ambient lighting conditions to create the effect you want. 'Auto'- and 'P'-mode should match those automatically. 'S' will choose the aperture and 'A' the shutter speed according to the ... Nikon D5000 Digital Camera

Shutter speed I have a cannon a410 power shot. when i take pictures it takes about 10 seconds for me to be able to take another picture. this problem just started recently. I must have changed a setting and I am not sure what setting it is to change it back. can you please help me change the setting back so I can take pictures faster. thanks


If there is a factory reset option it the settings try pressing that. Remember to back up anything on the camera (eg. photos). ... Canon PowerShot A410 Digital Camera

I have a rebel xt 350D , using 75-300mm 5.6f lens to do some girls basketball photography inside a gym. Had camera set on: ISO 1600, M mode, 5.6f, 200 shutter speed (that seem to set automatically), used built in flash, Exposure level was in the middle of the chart, auto focus, al servo, continuous shooting, used awb. Got pretty good freeze action shots, with little or no blurring but the photos were dark. Some I could make lighter with photoshop but lost some detail and the contrast was too muc


Unless you were up close and personal, the built-in flash was your problem. Anything past about 15 feet and your picture will be dark. You would have been better off turning the flash off and using available light. Once the flash is off, you can set ... Digital Cameras

We adjusted the settings to fast shutter speeds and now get a "systen error - focus" and cannot take pictures and the motor is not pulling the lense back in when we switch it off. We can hear the motor turning but it does not appear to work. Also the front protection shutter does not close properly.


Someone has applied force to the lens and that's what is causing your problems, not the settings adjustments you made. Try these:\015\012 ... Panasonic Lumix DMC-ZS3 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1419 seconds